VaporMoon & The Saber Touch Official Thread!

[Sir_Lawrence]

I hope to have the new style Saber Touch
That will accept the Kick with a 18650 battery
On my site by the end of the week!

And a video as well!

 

[Tat_skull]

I hope to have the new style Saber Touch
That will accept the Kick with a 18650 battery
On my site by the end of the week!

And a video as well!

Wowzers, that was quick!! Can't wait to check this one out

 

[smokie]

Just a heads up smokie, NHALER should have them in stock this coming week(they didn't specify what day) so keep an eye out!! Also Electronicstix and Altsmoke both have a "Notify me" option. I would HIGHLY recommend doing this since the tend to sell out within minutes!!

Thanks for the info will be looking out.

 

[ruff]

Sir_Lawrence, i am currently putting a cart together for a saber and was watching your video on the High Power part of your page and at 3mins 19seconds in you have a 3.7v 16340 battery that is 1000mah and i have been looking around and found some that look similar but was wondering if they were the TR 16340's or are those just the same color? i dont want to get a saber and then receive the batteries only to find that they are too long to fit in the VV body. Thanks for reading and putting the time in to such a wonderful looking mod.

 

[Sir_Lawrence]

Here is a link to those batts. They say 3.6v on the site, but they are really 3.7v 1000mAh.

Batteries 3.7v 1000mAh

Now they come from China and take forever to get to you.

I would just get some AW 16340 550 or higher mAh 3.7v batts. They work wonderfully in the Saber VariVolt!

 

[ruff]

thanks sir as always a very quick response, i just didnt want to be stuck with only the passthru option til another shipment of batteries was received lol

 

[Tat_skull]

I'm gonna chime in here with another option... I used AW IMR 18350's(700mah) in a VV(and in a mini). With this option you get 150mah extra per batt over the AW IMR 16340's(550mah). They fit perfect!!

 

[Sir_Lawrence]

You are right. I'm going to start letting people know about that option on my site. They do last longer!

 

[TomCatt]

The Trustfire "Flames" protected 16340s fit the VariVolt.

 

[ruff]

Thanks everyone for the replies, i had read that the 18350s would work but didn't want to chance them not working

Sent from my SGH-I897 using Tapatalk

 

[Sir_Lawrence]

Hey guys... Here's a new video from Smokie!

​

 

[Splinter]

Evening Sir Lawrence . Hubby and I are so excited and can't wait till our minis arrive. Just ordered the batteries today and I'm hoping they get here before the ST minis so I won't have to wait to charge them to try out the ST.

 

[Sir_Lawrence]

Hey Guys...
I hope to have the Saber Touch Kick Edition up on my site tomorrow sometime. I'm also trying to get a video done for it.

 

[Sir_Lawrence]

Well, it's Finally Here!
The Saber Touch "Kick" Edition!

You could always use the Saber 3.7v/6v Edition with the Kick,
Using a smaller battery...

Well, Now you can use the Kick with an 18650 3.7v IMR Battery!
No Sleeves to add...
And you can use it even without the Kick...
And you can use a Saber Passthru with it as Well!

So Many Ways To Get Your Perfect Vape,
With Just A Slight Touch!

Here's a small video to show how to use it...



You All Have To Tell Me What You Think!

It's Now Available On My Site...

VaperMoon.com

Keep On Vapin'!

​

 

[Tat_skull]

WELL DONE Sir Can't wait to give this mod a "touch" Crema is ridiculously BEAUTIFUL and with your "Magic" inside, PERFECTION

 

[wingsprouts]

She is just stunning Sir, thank you so so very much! I love her 3 centered lines!

Her name is Dulce (Sweet)

 

[N rustica]

Wow, it's lovely. So the passthru can be used with the kick, but only at a lower voltage setting?

 

[Sir_Lawrence]

Wow, it's lovely. So the passthru can be used with the kick, but only at a lower voltage setting?

Yes, but I'm not going to advertise it that way because I know that a bunch of people will say that the Saber shorted out their Kick. See, the Saber can handle 24v and over 20amps! The Kick, at most, will allow 4.5v input (according to the manufacturer). So it is designed to be used with 4.2v or less. On my Adjustable AC Adapter, there is a setting for 4.2v. But I know that people will try to go higher.

 

[Sir_Lawrence]

And now, it's up on my site!

 

[sachiaiko]

Hey, it just occured to me i wondered if you can use the 3.7v c123 Or whatever they are in the Sabertouch Original - i always hear you guys talk about 2 3 volts but not 2 3.7 vols to get to 7.4

Not that i want to VAPE at 7.4 but i am curious if its even doable. I thought any batteries would work really so long as they fit - is that right or am i sorely mistaken in my assumptions? I know very little about amperage etc.

BTW! after 3 years of wanting one of your Saber Touches and being unable to get one due to being disabled on a fixed income, I am getting one of your sabertouches with the help of my friends and family for my Birthday !!!

Which is TODAY! :beams happily: YEARS of wanting one of your beautiful MODS! :does a lil happy dance: I really think of all the mods, yours are the most... Well, Its not that they are the best at EVERYTHING, But these are the things i really like being a prospective customer who does not yet own one.

1. Your Button!! I LOVE the idea of a button where i complete the circuit! I have a Chronic Pain disorder that makes my hands sometimes not do what i want. Buttons KILL me. My first real mod i got was a Roughstack and that button is just hell. I swear my hands are always hurting because of that sharp, pointy, unrealiable button.

2. MANY color choices! Really unlimited if you wanna buy the powdered coatings.

3. Beautiful, classy design that can be altered depending on customers preferences in small but tangible ways that aren't expensive. The simple fact you offer different kinds of end caps, while not a huge "change" for you really does allow customers to customize the peice that they want. Believe it or not, that makes a real difference. I think people would be more successful if they offered more small changes to their products like this. Just in general.

4. Personal connection to the seller. While i've never spoken to you, the fact you make alla these youtube videos and share your new breakthroughs and ideas and thoughts and excitements makes me WANT to support you as a small business in our country! That might sound silly, but its undeniably true. I am excited to watch your videos and SOON i'll get one of my OWN Sabertouches (Hopefully as soon as i can purchase my order. hehe. hell, i hope i have it next WEEK if i can!!)

4. The fact you keep coming up with new additions and things to add to your products, i love that. Every product thats wonderful needs to keep seeking to improve, even if its already the best!! You keep up with the industries changes. Thats IMPORTANT!

It says something that the PV i have wanted for like 3+ years is yours. And maybe the Chuck too. But you'res has been really my Dream PV since i saw it and heard about it read abut it and watched your vids.

Anyhoot, i just thought i'm give you my two cents and tell you how excited i am that i might FINALLY be getting one of your wonderful PVs and give you my two cents as to why you've been at the top of my "Wish list" for a while.

its not FOR SURE yet, but its lookin' Good so far!!!

And i would probably be unable to do it if it wasnt for one of your deals. I prolly wont get to build my own color etc, but thats okay, I really really want a SaberTouch. I'm really Really Excited!!

Sachi (rereading my post, i sound like an excited teenager. I cant believe I'm 31 today! lol!)