VaporMoon & The Saber Touch Official Thread!

Status
Not open for further replies.

Sir_Lawrence

Unregistered Supplier
ECF Veteran
Dec 26, 2009
5,770
1,930
Maryland
vapormoon.com
I hope everyone's day was great today. I started at 4am to get ready to take my son to PA to a dogsledding event with his Cub Scouts. They learned all about dogsleds, and then got to ride them with a team of 6 dogs. He had a great time, and so did I. But when it's 12 degrees outside, standing in the snow for 5 hours, you kinda wish it would end! I think it took us 2hrs just to thaw out! But he had a great time, so it was worth it.

I going to be mailing out a lot of ST's on Wednesday and Thursday... so keep your eyes open for a shipping announcement.
 

Brewlady

Super Member
ECF Veteran
Verified Member
I hope to go... I just have to do some planning.
My sister is home and doing much better. I hope she stays well.

Glad to hear that she is improving!

I just attended my first vape meet last night, and plan on going to Philly, hope you are able to make it!
 

eciglopedia

Senior Member
ECF Veteran
May 22, 2009
294
37
51
Duncanville,Texas



Eciglopedia's review of the SaberTouch 5v Regulated “Black Tie Edition”.
Look & Fell:
It is like your in control/Ladies the mini volt is not as heavy and you can hide it in your hand.
Vapor Production:
Is like puff the magic dragon. It is like the cadillac of all PV's...
Throat hit:
Is just way to legit to quit! You’ll feel like your @ fantasy island w/your saber, your saber!


Please note: It is sold alone, all battery’s,atomizers,and charger SOLD SEPARATE!

You can choose either 3.7v/6v; 5v regulated; variable volt; or the mini volt.

You will need 2(16340/cr123)protected 880mah battery’s. Always keep them paired as sets.

5v regulated means it is regulated for steady 5v vaping. Each one custom made by hand from Sir Lawrence himself.

The durable circuitry is sealed in the top cap to keep from any moisture getting in. If removed it will VOID your warranty.

Safety features:
1-Will not accidently activate unless touched.
2- Two vent holes @ the bottom for ventilation.
3-If your battery’s should ever short out, the spring will collapse on itself separating the battery’s.
4- Battery under voltage protection, the mod was designed not to discharge your battery’s totally dead. This way you get more charges and life out of your rechargeable battery’s.


I want to send a shout out to:
ElixirTV, The Smokie’s show, & Vapormoon(Sir Lawerance) for allowing me the chance to participate in the giveaways last christmas2010. And lastly my awesome friend OlWildBill in Kansas City,Missouri for sending me the battery’s to do this review. He is an angel from above…. God Bless you all!
Happy vaping! Vape On! & Vape Hard!
 

free2live

Senior Member
ECF Veteran
Nov 29, 2010
83
11
Missouri


I going to be mailing out a lot of ST's on Wednesday and Thursday... so keep your eyes open for a shipping announcement.



Hi My name is Sandy and I ordered a Saber Touch Pink Spakle Hope Edition - VariVolt .......I hope mine is in this shipment, but if not I understand how busy you are Sir Lawrence especially where I have been reading your sister has been ill....family is the most important thing!

I am so excited about getting mine , I am about ready to burst...LOL I personally have not had cancer but do support the cause and I LOVE the pink option.

I am fairly new to vaping....last cig was Dec 1st.......very excited about trying out high volt vaping, but I have a few question if anyone can help me out I would so much appreciate it.

Two minutes after I order my Saber I went to Mapvapes and ordered batteries....ect. Here is where I get lost with the cartomizers...atomizers ect. Can anyone tell me the best (ultimate) vaping experience with the carts I list at what voltage I should use?

1. 510 5 ohm
2. 510 2.5 ohm
3. 510 LR atomizer
4. 510 regular atomizer

Also what kind of juice is best for higher voltage? I curently have 510....and mini REO mod which is 3.7 vaping and I love it....but have not fully understood the different levels yet. I would so much appreciate some insight so I can experience the best vaping possible.... Thanks!!!!!!!
 

Sir_Lawrence

Unregistered Supplier
ECF Veteran
Dec 26, 2009
5,770
1,930
Maryland
vapormoon.com
Well, so far, we've gotten between 4-6" of snow. It stopped for the moment, but supposed to start back up in a little while and end around midnight. My guys couldn't get in this morning, so I'm loosing one more day of work. In addition, my wife is an RN who did make it to work, and has already told me that they are keeping her overnight in case others can't make it in tomorrow morning. I hate winter sometimes!
 
Last edited:

Sir_Lawrence

Unregistered Supplier
ECF Veteran
Dec 26, 2009
5,770
1,930
Maryland
vapormoon.com
Finally... my power is back on! It turned off about 11pm last night, and now it keeps coming on and off. I hope it stays on. It got kinda cold in the house last night!

We ended up with 14" of snow in this part of Maryland. I hope everyone on the East Coast survived this storm... safely!

Hopefully, I'll be able to come back online later. Right now, I'm stranded at home since the state has yet to get to my roads. We are always the last. My wife is being held over again tonight at work since so many people can't make it in to her hospital.

You feel like you are in the stone ages with the power out. As soon as the lights went back on, started up the computer, and started charging my phone again! I hate not knowing what's going on in the world!
 

Sir_Lawrence

Unregistered Supplier
ECF Veteran
Dec 26, 2009
5,770
1,930
Maryland
vapormoon.com
That's funny Brewlady!

Well, the power stayed on, and even though my guys couldn't come in today, I still got some work done. But it looks like the Sabers that were supposed to be mailed today will be mailed either Saturday, or Monday. I'm sorry about that guys... I can't control everything. But ALL orders, up to last Sunday should be mailed by Monday. Thank you all for your understanding.
 

Sir_Lawrence

Unregistered Supplier
ECF Veteran
Dec 26, 2009
5,770
1,930
Maryland
vapormoon.com
Great News!

It has been a very difficult time to keep anything in stock for two reasons:
...People have been ordering like crazy, and
...One of the electrical parts I use has been very difficult to find in quantity. I had to use like four different companies who would only allow me 25pcs at one time. Finally, I've secured the part with a company that has special ordered the piece for me... 5,000pcs! Now I will able to keep some stock of colors and voltage options so there won't be such a wait. I won't receive these for another couple of weeks, but hopefully, that will carry me for a little while.

So, until then, please be understanding for the delay, since I have to make each one to order instead of coming from stock.
 

Sir_Lawrence

Unregistered Supplier
ECF Veteran
Dec 26, 2009
5,770
1,930
Maryland
vapormoon.com
Well, it's been a good day today. Lots of Sabers are going to be in the mail tomorrow and Tuesday. And thank goodness, after a week off of school, my son is finally going to be going back to school tomorrow! I know he's been going stir crazy as well. I hope you all have a great evening.
 

eciglopedia

Senior Member
ECF Veteran
May 22, 2009
294
37
51
Duncanville,Texas


Eciglopedia's 2nd SaberTouch video-Follow-up details not covered in video#1:
The Saber Touch is designed with 6061 aircraft aluminum, so you have zero worries of ever damaging it.

The Saber Touch 5volt Regulated weighs approx. 3.8 oz. It is approx. 4.5" tall & 1" wide.
The Saber Touch mini volt weighs approx. 3.4 oz. It is approx. 3" tall & 1" wide.

They make adapters for just about any PV on the market to adapt to a 510 connector.

If you ever have any questions about the Saber Touch mod's you can always email Sir Lawerance @ Flash Intro Page.
I hope you all have a Blessed day.
Vape on! & Vape hard!


:matrix: Thank you to all who are giving me support!:headbang:

:banana::banana::banana::banana::banana::banana:
 
Status
Not open for further replies.

Users who are viewing this thread