Hey Splinter, if you don't mind, what hardware - atty's/cartos are working for you and at what voltages? Do you ever use 6.5v and if so what works with this?
Thanks,
Rabdaddy
Thanks,
Rabdaddy
VaporMoon & The Saber Touch Official Thread!
- Thread starter Sir_Lawrence
- Start date
- th_trl_thread_readers 0
- Status
Did it arrive, Tat?! We would love to see the shiny Silver Dream all dressed up. 
Unlucky today Ace, it got stuck at the sort facility
Means it's gonna be another sleepless night
Means it's gonna be another sleepless night
How about I take a stab at this
When I ran the adjustable passthru, I ran Ikenvape LR 1.8 901's at 4.2 volts and at 5 volt's I ran Ikenvape(stealth) 2.5 901's at 5 volts. I suppose you could run 3.5 atty's at 6.5, I just never wanted to push the envelope. My favorite has got to be the first by all means though.
Sorry Rab. Just got back a little while ago. Hubby's on vacation this week and we've been taking our daughter out during the day. I mainly use Boge LR Cartos either by them selves or in a Phiniac tank. When using the batteries, I get the 3.7 vape till the battery starts to run low, which happens often so stock up
. When I'm using my Passthrough, I vape at 4.2. I've tried going higher with a Reg Resistance Carto but it gets too hot for me. Now my husband has the mini with a Passthrough and he loves the 5volt vape with a 3.0 ohm Boge Carto. I'm not much of a fan of clearo because I either seem to burn out the wick before I even get to try it or they leak. Hubby tried the highest voltage the Passthrough goes to but he said everything tasted burnt to him.Unlucky today Ace, it got stuck at the sort facility
Not *liking* this Tat
. I've had that happen so many time lately, it makes me crazy. My husband works for the Post Office and whenever my stuff gets stuck at the sorting plant, I complain to him lol. All he can tell me is that the P.O. is cutting back on OT so packages are taking a day or two longer
Thanks Tat. Well, I know Ikenvape isn't available right now.
Curious - why 901 and not 510?
Curious - why 901 and not 510?
I stay fairly stocked when it comes to IKV, everything sells out so fast!! I order even if I don't need em at the moment, I figure hey 2 atty's=2 packs of smokes so I'll buy the atty's rather than the smokes. Now for the 901/510 question, I am a DIE HARD FLAVOR JUNKY!! I have tried almost every atty and carto out there in my 2years+ vaping and nothing comes close to the flavor of an IKV 901!! With 510 and 306, you get more of the throat hit affect rather than the flavor affect that the 901 gives. My favorite of all times has got to be the 1.8 IKV 901, but now thanks to my kicked Saber, I set the kick then install any resistance atty on it and get the same puff EVERY single time(till the battery drains to much
)
Not *liking* this Tat
This is the first time it has happened to me. If a package hit's the sort facility before 2A.M. then my package will be here and if it's there after 2A.M., It won't get here. But this time it was there since yesterday and it did not show today
Oh Well, there's always tomorrow
Sorry Rab. Just got back a little while ago. Hubby's on vacation this week and we've been taking our daughter out during the day. I mainly use Boge LR Cartos either by them selves or in a Phiniac Tank. When using the batteries, I get the 3.7 vape till the battery starts to run low, which happens often so stock up
5volt / 3.0 apparently is a favorite. So are the LR Boge's. Got 'em- like 'em.
I'm a 0% nic vaper. I need to investigate all options for TH. Thanks for the info.
Checked out the Phiniac - hand blown glass - pretty cool. A little rich for my blood.
Cheers
I myself do the whole 5volt/3ohm(well 2.8) carto in a tank(IKV Fusions in a M1A1) for my menthol juice that I have to have during work, only thing is I have to use another device for that, if you saw my work mod you would understand why my beautiful Sabers can't go to work with me
Oh and splinter, I'll be joining the phiniac scene now with the Silver Dream since my BFF(forever) Wingsprouts gave me a Custom Phiniac for my birthday and I have not ever used it
But now with this shiny delight, I had to get some SS caps and put it to use...Come on Tomorrow
Last edited:
If you go onto the Phiniac website and sign up for the newsletter, every so often you'll get a discount code that runs for a few days. Without the codes, I wouldn't have mine either. I happen to like the sandblasted ones the best
Sorry I couldn't get things up on my site... just not enough hours!
I'm going to have some of the 1 of a Kind Sabers, and some Huge Discount Sabers soon on there.
I'm going to have some of the 1 of a Kind Sabers, and some Huge Discount Sabers soon on there.
Oh and splinter, I'll be joining the phiniac scene now with the Silver Dream since my BFF(forever) Wingsprouts gave me a Custom Phiniac for my birthday and I have not ever used it
Awesome
. Please post a picture of the setup when you get it . My Phiniac was a Mothers Day gift from my hubby and daughter .
Last edited:
Can't wait to see what you got up your sleeve!!
Awesome
I sure will post a pic splinter(hopefully tomorrow
) And thanks for the Happy Birthday, can you believe I've had this tank since March!!! I just never found the right mod for it, UNTIL NOWWell, between getting Sabers and other things made...
My Nickle Plating equipment showed up today!
It takes an awful long time to heat up that much water to 180F to just dissolve the chemicals. Then waiting a couple of days to Age the mixture. Can't wait to see on Sunday if I can actually go this!
My Nickle Plating equipment showed up today!
It takes an awful long time to heat up that much water to 180F to just dissolve the chemicals. Then waiting a couple of days to Age the mixture. Can't wait to see on Sunday if I can actually go this!
Lookie what came in the mail today
And here's the custom Phiniac with "Tat" etched on one side and a skull on the other side, Tat_skull
Now in all seriousness, this is one "TOUCHY" Saber!!! Being that the whole thing is a ground, it makes no difference if you touch the cap or not, in fact, I put it down and touched my finger on the body, and my thumb just lightly skinned the sensor and it fired like a BEAST!!! This is the meanest Saber I have ever owned. I cannot tell you how much I love this device today!! The 1/16 lines are without a doubt a HUGE highlight on this device, the feel so comfortable to hold. Aww man, I'm rambling here, can you tell this is Probably my favorite Saber EVER, well it is THANK YOU SO MUCH Sir_Lawrence!! This Saber is BEYOND INCREDIBLE!!
(Dang imageshack only let me put one pic big..
)
And here's the custom Phiniac with "Tat" etched on one side and a skull on the other side, Tat_skull
Now in all seriousness, this is one "TOUCHY" Saber!!! Being that the whole thing is a ground, it makes no difference if you touch the cap or not, in fact, I put it down and touched my finger on the body, and my thumb just lightly skinned the sensor and it fired like a BEAST!!! This is the meanest Saber I have ever owned. I cannot tell you how much I love this device today!! The 1/16 lines are without a doubt a HUGE highlight on this device, the feel so comfortable to hold. Aww man, I'm rambling here, can you tell this is Probably my favorite Saber EVER, well it is
THANK YOU SO MUCH Sir_Lawrence!! This Saber is BEYOND INCREDIBLE!!(Dang imageshack only let me put one pic big
..)
Silver Dream is AMAZING Tat!!! Finally, I get to see that tank
Get a big picture of the Saber up!
Get a big picture of the Saber up!
Image shack ios refusing to make it biggerSilver Dream is AMAZING Tat!!! Finally, I get to see that tank
Get a big picture of the Saber up!
I even tried the 800x800 option with no success
Congratulations on the new equipment Sir, you'll know how to use it in no time.
Everything you touch is magic
- Status
Similar threads
- Locked
