VaporMoon & The Saber Touch Official Thread!
- Thread starter Sir_Lawrence
- Start date
- th_trl_thread_readers 0
- Status
Sup Moon Dwellers, I have no copy and paste on Google TV, but if I did it would be Mudvayne-Not Falling and Young Gunner(feat Jawga Boyz)-Mudgrips on Everything. Hint Hint
Hey guys... love all over you wonderful posts while I was gone for a while in the hospital again. Thanks for bearing with me.
Here what I need from you all...
I want to do a video of how the 3.7v Saber works with very low resistance atties.... along with 2 and 3 coil atties.
I want to show off all of my little scientific lab toys in the video as well to show how the Saber reacts compared to mechanical mods.
I need some places that I can order what all of you are ordering...
You can email me at SirLawrecne@VaporMoon.com if you can let me know the best and most popular 2 and 3 coil atties, and the lowest ohm atties out there.
Thanks for your help.
Here what I need from you all...
I want to do a video of how the 3.7v Saber works with very low resistance atties.... along with 2 and 3 coil atties.
I want to show off all of my little scientific lab toys in the video as well to show how the Saber reacts compared to mechanical mods.
I need some places that I can order what all of you are ordering...
You can email me at SirLawrecne@VaporMoon.com if you can let me know the best and most popular 2 and 3 coil atties, and the lowest ohm atties out there.
Thanks for your help.
Low price options:
IGO-L (Dripper) (Little tricky to dual coil this one but popular choice) IGO-L Rebuildable Atomizer
AGA-T and drill out the silica side (Gene) AGA T2 Rebuildable Atomizer RBA
Mid price option:
Trident Clone (Dripper) https://chasethevape.com/zen/index.php?main_page=product_info&cPath=1&products_id=26&zenid=694154298063f6a923d28723bfc79850
Higher Price Option:
Trident rba (Dripper) Trident
Nimbus (Dripper) Nimbus Drip Atomizer
Edit:
The Nimbus is probally the most popular and the easiest to dual coil... If you need me to meet up with you one weekend to help out let me know and we can see what I got going on.
Wire is also a huge considerations in dropping super low ohms, wrapping a 32 ga often wont cut it, most people that dip super deep sub ohms use a wrapped wire (like takeing 2 peices of 32ga and spinning them on a drill to braid them creatting something around 28ga.) If they are using just standard round A1 kanthal they will go with 28ga. Often times they opt for ribbon (or flat) kanthal as it produces a wider surface area along with other things that make it proper for sub ohms.
WARNING MATH STOP READING HERE IF YOU DONT LIKE MATH!
The base concept you are going for, if you use 28 ga, and wrap a .5 ohm coil... and you have 2 of them you are at .25 total ohms... Lets say underload the battery and device is giving 3.4V. That would be 46.24 watts and 13.6 amps.
You would dual coil a 2/3 wrap of 28ga and that should be obtainable...
Watch the amps and the amp limit on the battery!
Most sub ohm vapers are comfortable between 20-30 watts... You can go higher than my example there but 46.24 watts is pretty darn high if you ask me!
Last edited:
Sorry didn't see this post till now. Sounds like you are looking for Non-RBA attys? If thats the case I have no clue what has how many wraps lmfao never checked into that... Took the leap to RBA instead I guess.
Nitro clearly knows his stuff, I wouldn't even dare trying to add anything.
WAIT I LIED!!! What about micro coils??? "They are the new thing." Take 9 wraps of 28 gauge kanthal with the coils basicly touching and get 1.6ohms. Made my first one and it seems to work very nicely. I guess the idea is more surface area = more vapor and flavor.
Glad you are home!!
Nitro clearly knows his stuff, I wouldn't even dare trying to add anything.
WAIT I LIED!!! What about micro coils??? "They are the new thing." Take 9 wraps of 28 gauge kanthal with the coils basicly touching and get 1.6ohms. Made my first one and it seems to work very nicely. I guess the idea is more surface area = more vapor and flavor.
Glad you are home!!
Last edited:
Working on getting in touch. =) I'm not the best but I can build pretty low.... I do mostly single coils though. NoFlex would be better but hes up north some where.
Just won a 50 credit lastnight on modenvy!! Got a igo l in the mail getting excited!!!! Sir lawrence can the copper vein be put on the knurled finish?
sir larwence im excited for my new copper sabor to arrive but wile I wait im intrested to see how 8t preforms
Hi Guys...
I'm Alive and Well! It's hard to get rid of someone like me!
For a while, I thought my son wasn't going to have his dad anymore...
But I'm doing much better.
And I want to thank you all waiting for your Saber Orders for your fantastic understanding.
And I want to offer you all a 15% OFF coupon code for a new Saber Touch order.
I can only do this until Wednesday Night 6/26/13, and for new orders only.
Use code well15 at checkout.
Again, thank you all for your wonderful support. I'm proud to be part of the vaping community!
I'm Alive and Well! It's hard to get rid of someone like me!
For a while, I thought my son wasn't going to have his dad anymore...
But I'm doing much better.
And I want to thank you all waiting for your Saber Orders for your fantastic understanding.
And I want to offer you all a 15% OFF coupon code for a new Saber Touch order.
I can only do this until Wednesday Night 6/26/13, and for new orders only.
Use code well15 at checkout.
Again, thank you all for your wonderful support. I'm proud to be part of the vaping community!
I am happy to hear you are doing well or at least better, I am still a fairly new vapor-er just a few months and I just found out about these magnificent mods last night,I had literately just told the guy that has given me sanctuary that i don't need another mod just juice and replacement coils for my evods, and then i saw a link... spent the night making them on your page, I was really looking into the giant one but it just might me too much so I plan on getting the Saber Touch...
1 LE II 6 Turned Lines
Add 6 Turned Lines $10
$10.00
1 Saber Touch Color
Screamin' Eagle Black Crinkle
$0.00
1 Sensor Style
Large NICKLE SILVER Sensor Button
$2.00
1 Saber Touch Edition
3.7v/6v Edition
$109.00
1 Cap Style
New Rounded Cap
$10.00
1 Cap Color
Nickel Plated
$5.00
every review i have watched and it seems like i did a lot of watching today nothing but great things were said, do you know how long of a lead time you have on these, I know you make them all to order and i will need to get the cash oh boy i can't wait
1 LE II 6 Turned Lines
Add 6 Turned Lines $10
$10.00
1 Saber Touch Color
Screamin' Eagle Black Crinkle
$0.00
1 Sensor Style
Large NICKLE SILVER Sensor Button
$2.00
1 Saber Touch Edition
3.7v/6v Edition
$109.00
1 Cap Style
New Rounded Cap
$10.00
1 Cap Color
Nickel Plated
$5.00
every review i have watched and it seems like i did a lot of watching today nothing but great things were said, do you know how long of a lead time you have on these, I know you make them all to order and i will need to get the cash
oh boy i can't waitIf you are out of the country, you will have to email me your order at SirLawrence@VaporMoon.com
Right now, since I lost several weeks, I trying to play catch up on orders. Normally I say 14-21 business to hand make your Saber, but until I get caught up, it's been taking longer.
Just email me and let me know what you would like to do.
And thanks for the nice compliments.
Right now, since I lost several weeks, I trying to play catch up on orders. Normally I say 14-21 business to hand make your Saber, but until I get caught up, it's been taking longer.
Just email me and let me know what you would like to do.
And thanks for the nice compliments.
I am in Mass and I understand you can not rush perfection, nothing beats hand made I love that you do it all in house, I will be shooting you an email very soon , now i get to poke around and look at all the possibilities
now i get to poke around and look at all the possibilitiesSounds good... but since your are in the USA, you can order right from the site. Just make sure you go through each option.
are these options viable in a mod or with the texture is it just a color?
like i said i keep looking
E II 6 Turned Lines
Add 6 Turned Lines $10
$10.00
remove
Saber Touch Color
Screamin' Eagle Black Crinkle
$0.00
remove
Saber Touch Color
"Knurled" Finish (Silver)
assuming the silver is now the black leather color
like i said i keep looking
E II 6 Turned Lines
Add 6 Turned Lines $10
$10.00
remove
Saber Touch Color
Screamin' Eagle Black Crinkle
$0.00
remove
Saber Touch Color
"Knurled" Finish (Silver)
assuming the silver is now the black leather color
- Status
Similar threads
- Locked
