Vision Spinner 2 Help!!!

[BigCity901]

Just got the Vision Spinner 2 in today. I looked over the paper pamphlet and it didn't mention anything on charging it. So I plugged it up with a standard 420ma usb charger and 500ma wall adapter. It stayed lit a steady blue while the charger itself was red while pulsing green. After about 30 minutes the light went off and the charger turned to a steady lit green. I took it off and put a tank on and started using it. Seems to be working fine but when I press the fire button it lights up "blue" but when reading the manual it states that it should be displaying "white" for 60%-100% remaining, "blue" for 30%-60%, and "orange" for 0%-30%. I just started using it so it hasn't changed colors yet. So does anyone else have a Spinner 2 that could give me some feedback. Starting to think I may have a defective unit...

 

[Sthur]

Check this thread, it should take a couple hours to completely charger the spinner.

http://www.e-cigarette-forum.com/fo...sion-spinner-1300mah-charging-question-2.html

 

[flowerpots]

I have 2 1600mAh Spinner V2's and both came almost completely charged, from 2 separate vendors. I charged both when they arrived and that took about a half hour, if I remember correctly. But, I'm not sure why it's showing blue and not white.

The only thing I can think of is to use the battery until it lights orange, recharge it at that point and see if it charges to white when the charges shows green. It takes mine about 4-5 hours to charge once they are orange.

Also, I would check with your vendor to see what return policy they have. Some have warranties, some only have DOA warranties.

 

[Gargoyle]

I read someplace that you need to turn the VV knob to read about 4.3 when charging as well. Dunno if its true or if it makes a difference. Just throwing it out there.

 

[BigCity901]

@flowerpots... I emailed them within hours of opening the package up... another thing is that my box states a 1650mA battery but the pamphlet itself says 1600mA... and yes it came with a Vision Authenticity Scratch Off... and I opened up a support ticket as well... haven't heard back but I know they are closed on Sundays and not sure if they will be open tomorrow but I will sure check.

 

[flowerpots]

@flowerpots... I emailed them within hours of opening the package up... another thing is that my box states a 1650mA battery but the pamphlet itself says 1600mA... and yes it came with a Vision Authenticity Scratch Off... and I opened up a support ticket as well... haven't heard back but I know they are closed on Sundays and not sure if they will be open tomorrow but I will sure check.

That's odd@box stating 1650mAh. What did your box look like? Was it a black Vision Spinner box? Did the battery itself come enclosed in a white plastic sheath? Yeah, I would imagine no one is there, being Sunday and a holiday weekend.

Did you use the battery? Have you tried to recharge it yet?