Okay so going the opposite direction of crazy high power. 
The package for these tanks stated 2ml and 2.5ml for the mini and the pro. This is .5ml less than most advertising I am finding on the web. I can confirm they do hold right at the 1.7 and 2.7 ml range.
tanks come with a .1 Ni coil (600F) and .5 coil (50 watt) in each package with extra drip tip, but no extra glass. Most of these I believe will end up packaged with their mods for a "combo price".
To be clear these are absolutely designed to compete with Kangertech, Eleaf iJust series and some Joytech and if you are a shopper in this arena these are tanks to consider. It has been "throwback" days for me tootle puffing 450F and or 50 watts the past few days testing these out. What I am reminded of is vapor production & flavor can be excellent without 175 watts.
I had absolutely no leaking and good airflow from my testing thus far. The top fill reminds you of a Crown tank, but I can tell there is some "chroming of an alloy" inside the tank frame. It reminds me of a Kanger Geni tanks finish (on the inside). Outside seemed as well coated as anything else I have used.
www.govpark.com is just launching, but click through is limited right now from what I can see *BUT* if you Google VPARK 150 or VPARK Tank info is starting to pop up.
Vpark Maxtank Pro atomizer
Material: Polished SUS 304 stainless steel and Pyrex glass tube
3ml atomizer capacity
510 Threading
Anti-slip O-ring
Kanthal dual coil 0.3ohm, work up to 70W
Prebuilt Ni200 coil 0.1ohm, work up to 600F
Airflow control and adjust on top and bottom
Filling on the top
Cloudy vapor production
Black / white / silver available
*Thanks to www.healthcabin.net (vendor sponsor) for getting these to me quickly!
Material: Polished SUS 304 Stainless Steel and Pyrex Glass Tube
Capacity: 2.5ml
510 Threading
Airflow control and adjust on top and bottom
Filling on the top
Anti-slip O-ring
Come with 0.5ohm Kanthal dual coil
Work up to 50W
Cloudy vapor production
Black / white / silver available
The package for these tanks stated 2ml and 2.5ml for the mini and the pro. This is .5ml less than most advertising I am finding on the web. I can confirm they do hold right at the 1.7 and 2.7 ml range.
tanks come with a .1 Ni coil (600F) and .5 coil (50 watt) in each package with extra drip tip, but no extra glass. Most of these I believe will end up packaged with their mods for a "combo price".
To be clear these are absolutely designed to compete with Kangertech, Eleaf iJust series and some Joytech and if you are a shopper in this arena these are tanks to consider. It has been "throwback" days for me tootle puffing 450F and or 50 watts the past few days testing these out. What I am reminded of is vapor production & flavor can be excellent without 175 watts.
I had absolutely no leaking and good airflow from my testing thus far. The top fill reminds you of a Crown tank, but I can tell there is some "chroming of an alloy" inside the tank frame. It reminds me of a Kanger Geni tanks finish (on the inside). Outside seemed as well coated as anything else I have used.
www.govpark.com is just launching, but click through is limited right now from what I can see *BUT* if you Google VPARK 150 or VPARK Tank info is starting to pop up.
Vpark Maxtank Pro atomizer
Material: Polished SUS 304 stainless steel and Pyrex glass tube
3ml atomizer capacity
510 Threading
Anti-slip O-ring
Kanthal dual coil 0.3ohm, work up to 70W
Prebuilt Ni200 coil 0.1ohm, work up to 600F
Airflow control and adjust on top and bottom
Filling on the top
Cloudy vapor production
Black / white / silver available
*Thanks to www.healthcabin.net (vendor sponsor) for getting these to me quickly!
Material: Polished SUS 304 Stainless Steel and Pyrex Glass Tube
Capacity: 2.5ml
510 Threading
Airflow control and adjust on top and bottom
Filling on the top
Anti-slip O-ring
Come with 0.5ohm Kanthal dual coil
Work up to 50W
Cloudy vapor production
Black / white / silver available
Last edited:
