hi my vtbox200 today starting giving problems. It isn't chargif or illuminating anything on the screen but when I plug my usb in the screen will come on but still doesn't fire. It will prompt check atomizer. But once I pull the plug out the screen go black again. Can anyone tell me what wrong and also intro any shop that does mod repairs in Johor thks.
Vtbox200
- Thread starter Ddyeo
- Start date
- th_trl_thread_readers 0
- Status
Moved to Temperature Control from Ask The Veterans - you need help now, not in a few days
Ask The Veterans:
ATTENTION!
You can ask a question here and have it answered by experienced ECF members - the Vets are long-term members.
Please read the announcements within the forum.
Note that it may be two days or so before your post is answered, so this is not the place for time-critical queries.
Ask The Veterans:
ATTENTION!
You can ask a question here and have it answered by experienced ECF members - the Vets are long-term members.
Please read the announcements within the forum.
Note that it may be two days or so before your post is answered, so this is not the place for time-critical queries.
Does it make a connection with the escribe software? apparently there could be a way to reset it through that. I've heard of some dna 200 boards breaking after a while, the vendor should be able to sort something out if it doesn't work and if they can't then evolv can help too.
i was going to mention to open a case file with evolv...but you're in Malaysia...
best bet is to go to your vendor...
best bet is to go to your vendor...
If its a Yihi based board you can try to reset it.
Without the battery in it, press and hold the fire button while inserting the battery until you see the firmware version in the screen. This will reset the chip.
Is there a FB or site for the modders site? Most chips have a year warranty.
I just noticed its an Evolv , check their site and see if they have some tech support.
EVOLV - Home
Without the battery in it, press and hold the fire button while inserting the battery until you see the firmware version in the screen. This will reset the chip.
Is there a FB or site for the modders site? Most chips have a year warranty.
I just noticed its an Evolv , check their site and see if they have some tech support.
EVOLV - Home
- Status
