what build for an mvp2?

[Meeksology]

Whats up guys, what kind of build will work well on my mvp2? I have a magma, patriot and a nimbus. Should I use thinner wire or thicker? dual, single or parallel?
Appreciate any help I can get...

 

[mix1983]

As a former MVP user I suggest nothing lower than 1.6-1.8 ohm builds. The MVP will fire down to .8ish I believe, but I had built a 1 ohm coil that took forever to heat up.

As far as wire, diameter, etc I'll refer you here (click).

 

[Cowboy192]

i use a kayfun (but want a lemo) i find 1.4-1.8ohm with 30awg is pretty good, below t5hat it takes too long to heat the coil

 

[Meeksology]

As a former MVP user I suggest nothing lower than 1.6-1.8 ohm builds. The MVP will fire down to .8ish I believe, but I had built a 1 ohm coil that took forever to heat up.

As far as wire, diameter, etc I'll refer you here (click).

Thank you sir

 

[JeepyG]

I use a 1.0 ohm coil in my KangerTech AeorTank V2 on my MVP2.0
At 6.5Watts I don't find there is any delay in heat up time.
Nice vapor with great taste.

 

[edyle]

Whats up guys, what kind of build will work well on my mvp2? I have a magma, patriot and a nimbus. Should I use thinner wire or thicker? dual, single or parallel?
Appreciate any help I can get...

30 gauge kanthal, 1.5 ohm, single.