What is everyone using to vape this amazing juice?

[TraceyS]

I'm gonna have to do something! This juice just lays all over the wicks and has to be cleaned on each refill and I'm using minis! I have a protank2 and the controller and agree they are great together..... I may use mine once it is empty and a protank 3 I never could get into.....using the mvp with the protank 2/controller may be my set up Gotta vape all my other liquid out of it first...

Tracey

 

[mistike]

At home, Provari mini and KFL+ (and EHPro clones). On the go, innokin VV and Aerotanks (normal v2 and minis)

 

[Dominique Hoogduin]

Reo wich has become my trusted sidekick throughout the day with a RM. Also a MVP with a aerotank mega and two mechs with various RDA's when i need to blow some bigger clouds

 

[pwheeler]

A Reo Grand with RM2, a Reo Grand LP with Cyclone and AFC, and a HCigar Nemesis with IGO-W4, all with different NT flavors.

 

[Elizabeth Baldwin]

I use many different set ups.

Provari/Russian 91 (primary device)
Joytech EVic/Taifun GT
Magneto/Fogger V4
Stingray/3D Dripper
Nemesis/Kayfun
VTR/nautilus
Caravela/Igo W6
Sentinal/Kraken

 

[Kent Brooks]

Precise ELA w/ Precise Strata RDA by Super T Mfg
BCV Surfrider (Brass 18650) w/ Brass Quasar #LE-378
ZNA30 #1201 w/ Kayfun Lite +
GP PAPS 18500 LUX Edition v3 #136
JM22 Pressed Brass Set #049 (18650, 18500, 18350) w/ GP Paps v3 Switches, Brass Hybrid Caps, topped with Brass Quasar #LE-386, Brass Monkee, 22mm Patriot
REO Grand w/ RM2 x2 (Black Wrinkle, Green)
Provari v2.5 topped w/ Russian 91%
Richman Hybrid #024
BOMBSHELL STINGER, Kicked, w/ Omega RDA

 

[keithu2]

Precise ELA w/ Precise Strata RDA by Super T Mfg
BCV Surfrider (Brass 18650) w/ Brass Quasar #LE-378
ZNA30 #1201 w/ Kayfun Lite +
GP PAPS 18500 LUX Edition v3 #136
JM22 Pressed Brass Set #049 (18650, 18500, 18350) w/ GP Paps v3 Switches, Brass Hybrid Caps, topped with Brass Quasar #LE-386, Brass Monkee, 22mm Patriot
REO Grand w/ RM2 x2 (Black Wrinkle, Green)
Provari v2.5 topped w/ Russian 91%
Richman Hybrid #024
BOMBSHELL STINGER, Kicked, w/ Omega RDA

And this is "after" you thinned the herd?

 

[SnowDog]

Precise ELA w/ Precise Strata RDA by Super T Mfg
BCV Surfrider (Brass 18650) w/ Brass Quasar #LE-378
ZNA30 #1201 w/ Kayfun Lite +
GP PAPS 18500 LUX Edition v3 #136
JM22 Pressed Brass Set #049 (18650, 18500, 18350) w/ GP Paps v3 Switches, Brass Hybrid Caps, topped with Brass Quasar #LE-386, Brass Monkee, 22mm Patriot
REO Grand w/ RM2 x2 (Black Wrinkle, Green)
Provari v2.5 topped w/ Russian 91%
Richman Hybrid #024
BOMBSHELL STINGER, Kicked, w/ Omega RDA

Dang!! I've never even heard of most of that stuff!

 

[Kent Brooks]

And this is "after" you thinned the herd?

Yes, PIF'ed the K100, PIF'ed an Hcigar Chi-You Clone, PIF'ed a Hcigar Nemesis, PIF'ed (2) Vision Spinner 1300 mah, and I tossed the Sigelei #8 in the trash (not even worth PIF'ing)

PIF'ed a Trident v1 Clone and a ton of clearos...

Still have a Vamo v2, Immortalizer Clone, and an RSST I'd part with.

Still hanging on to the Igo-L, Igo-W, and some other bits and bobs (mostly clearos I use for testing, Protanks, Aerobase, etc)

 

[Kent Brooks]

Dang!! I've never even heard of most of that stuff!

The "herd" is actually growing because I am actively working on some "Frankenmods" - I am a big fan of the JM22 pressed brass tubes (I have three, 18350, 18500, and 18650), but I am NOT a fan of the JM22 switch... so I wanted to make (3) mods with hybrid topcaps and Paps v3 switches... BUT, the Paps switches aren't adjustable like the BCV switches, so I went ahead and got (3) BCV switches (because they are awesome). That leaves me with (3) GP Paps v3 switches that need 22x1 18650 tubes and adjustable top caps/510 connectors. The GP switches are SS outside, brass button, and smooth as butter... so I am hunting for 3 18650 tubes and adjustable top caps. When it's all said and done, I will have

18350 JM22 tube with BCV switch and Hybrid Cap
18500 JM22 tube with BCV switch and Hybrid Cap
18650 JM22 tube with BCV switch and Hybrid Cap

3x 18650 ??? Tubes with ??? Topcaps and GP Paps v3 switches

Open to suggestions on 18650 tubes and adjustable top caps for the last three, something that will look and perform well with the GP Paps 20x1 switches!

 

[Kent Brooks]

The "herd" is actually growing because I am actively working on some "Frankenmods" - I am a big fan of the JM22 pressed brass tubes (I have three, 18350, 18500, and 18650), but I am NOT a fan of the JM22 switch... so I wanted to make (3) mods with hybrid topcaps and Paps v3 switches... BUT, the Paps switches aren't adjustable like the BCV switches, so I went ahead and got (3) BCV switches (because they are awesome). That leaves me with (3) GP Paps v3 switches that need 22x1 18650 tubes and adjustable top caps/510 connectors. The GP switches are SS outside, brass button, and smooth as butter... so I am hunting for 3 18650 tubes and adjustable top caps. When it's all said and done, I will have

18350 JM22 tube with BCV switch and Hybrid Cap
18500 JM22 tube with BCV switch and Hybrid Cap
18650 JM22 tube with BCV switch and Hybrid Cap

3x 18650 ??? Tubes with ??? Topcaps and GP Paps v3 switches

Open to suggestions on 18650 tubes and adjustable top caps for the last three, something that will look and perform well with the GP Paps 20x1 switches!

Oh, and hunting for drippers for the above that meet the following criterion...

Brass Caps, legit, 22mm, extended 510 connection (not flush) so it can be used with a 510 connection.

Other legit 22mm drippers that would pair well with the yet to be constructed franken-mods with the undecided 18650 tubes and adjustable top caps. LOL

 

[Kevin33]

The "herd" is actually growing because I am actively working on some "Frankenmods" - I am a big fan of the JM22 pressed brass tubes (I have three, 18350, 18500, and 18650), but I am NOT a fan of the JM22 switch... so I wanted to make (3) mods with hybrid topcaps and Paps v3 switches... BUT, the Paps switches aren't adjustable like the BCV switches, so I went ahead and got (3) BCV switches (because they are awesome). That leaves me with (3) GP Paps v3 switches that need 22x1 18650 tubes and adjustable top caps/510 connectors. The GP switches are SS outside, brass button, and smooth as butter... so I am hunting for 3 18650 tubes and adjustable top caps. When it's all said and done, I will have

18350 JM22 tube with BCV switch and Hybrid Cap
18500 JM22 tube with BCV switch and Hybrid Cap
18650 JM22 tube with BCV switch and Hybrid Cap

3x 18650 ??? Tubes with ??? Topcaps and GP Paps v3 switches

Open to suggestions on 18650 tubes and adjustable top caps for the last three, something that will look and perform well with the GP Paps 20x1 switches!

Oh, and hunting for drippers for the above that meet the following criterion...

Brass Caps, legit, 22mm, extended 510 connection (not flush) so it can be used with a 510 connection.

Other legit 22mm drippers that would pair well with the yet to be constructed franken-mods with the undecided 18650 tubes and adjustable top caps. LOL

A Reo. asdljfosaidf

 

[RaleighHayes]

Just lowly Halo Tritons for me -- variable voltage, at least Though I am sure I'll be upgrading in the (probably near) future, the Triton has kept me off cigarettes for 8 months.

 

[TraceyS]

I am thinking I need a REO and a KFL ....how do I tell hubby this after making three juice orders in the past 10 days or so? lol

Tracey

 

[taki1203]

I am thinking I need a REO and a KFL ....how do I tell hubby this after making three juice orders in the past 10 days or so? lol

Tracey

You don't lol

 

[Kevin33]

Clark, just send all that scrap metal to Rob and he could probably melt it down and turn it into a Reo for you.

 

[Megan Kogijiki Ratchford]

You don't lol

Exactly!! My hubby and I have separate bank accounts and credit cards because we are both stupid with our money and that way we each have to deal with the ramifications of our own stupidness not the compounded stupidness from both of us.

 

[CorallineAlgae]

Still have a Vamo v2, Immortalizer Clone, and an RSST I'd part with.

Just lowly Halo Tritons for me -- variable voltage, at least Though I am sure I'll be upgrading in the (probably near) future, the Triton has kept me off cigarettes for 8 months.

I still use my Halo Triton set almost daily as they're great for on the go (not that I usually ever go anywhere). Still, you may want to consider asking Clark about that Vamo V2 & Immortalizer Clone. You'd still need some kanthal, organic cotton, 18650 or 18350 batteries and a charger though. I have a Vamo on the way to my house right now. ^_^

 

[TraceyS]

You don't lol

Oh I know that with little things but these aren't that little lol, he will notice. Need to start saving $$ I see....

Tracey

 

[Kent Brooks]

I still use my Halo Triton set almost daily as they're great for on the go (not that I usually ever go anywhere). Still, you may want to consider asking Clark about that Vamo V2 & Immortalizer Clone. You'd still need some kanthal, organic cotton, 18650 or 18350 batteries and a charger though. I have a Vamo on the way to my house right now. ^_^

Properly modified the Immortalizer is a great atty - the draw is too tight for me though. I never got into ribbon wire either, and that's what it works best with. If there's anyone who would like to take a stab at dripping, and doesn't mind a tighter draw (IE, flavor chaser, not a cloud chaser)... I'd be more than willing to drop it in a package - my only request is that when it no longer gets regular use, come back to the group and pay it forward.