What is the best atomizers?

[Currinhall]

What is the best atomizers and where can I order them from. Plus what is the difference between Low Resistance (1.5 - 1.7 ohms) Standard Resistance (2.2 - 2.4 ohms) High Resistance (3.1 - 3.3 ohms) and how does difference resistance affect the Vaper?

Thanks for all the help everyone

 

[uba egar320]

I really like PureSmoker.com - USA Electronic Cigarettes & USA Made eLiquid!!! 901 lr atty's. You can find them cheaper, but these seem to last the longest for me.

 

[Currinhall]

Plus what is the difference between Low Resistance (1.5 - 1.7 ohms) Standard Resistance (2.2 - 2.4 ohms) High Resistance (3.1 - 3.3 ohms) and how does difference resistance affect the Vaper?

 

[uba egar320]

The Lr's are good for bigger batteries(mods). You wouldn't want to use them on a regular sized ecig imo. They burn hotter, and drain the battery faster as far as I can tell. High resistance is going to be used for running a bigger battery at 5 6 or 7.4 volts to kind of tone it down a bit. If you used a hv on a regular device, it probably wouldn't vape much at all.

 

[Mr.Self_Destruct]

I prefer any SLB lr 901. I have yet to try a Cisco lr 901.

The lower resistance the hotter it burns and more vapor and Throat hit.

I don't believe there is really a "best" atty out there. It is just an individual preference.

It's also suggested to never use a lr atty on any battery with less than 400 mAh rating.

 

[JonnyVapΣ]

What is the best atomizers and where can I order them from. Plus what is the difference between Low Resistance (1.5 - 1.7 ohms) Standard Resistance (2.2 - 2.4 ohms) High Resistance (3.1 - 3.3 ohms) and how does difference resistance affect the Vaper?

Thanks for all the help everyone

Everyone likes different things their own way. The 'best' atomizer (for you) is the one you like best. It's like asking what's the best car to buy. I could tell you what I think but you may disagree. You're going to have to try a few and find what you like best.

That being said, I'm currently using Bauway (from MadVapes.com) at 2.5ohm on my 3.7v devices. Couldn't tell you if it's the 'best' but works great for me.







And......Chevy rules!

 

[RETUSN]

I use the LR 306 Cisco with my Inferno. Great vape, TH is exactly the way I like it. If I'm dripping, I'm Ciscoing.

 

[uba egar320]

Everyone likes different things their own way. The 'best' atomizer (for you) is the one you like best. It's like asking what's the best car to buy. I could tell you what I think but you may disagree. You're going to have to try a few and find what you like best.

That being said, I'm currently using Bauway (from MadVapes.com) at 2.5ohm on my 3.7v devices. Couldn't tell you if it's the 'best' but works great for me.







And......Chevy rules!

Just pulled a Chevy out of a little tiny hole with my NISSAN TITAN lol.

 

[daath]

Just wondering, isn't high-ohm better for HV devices? If you use high-ohm attys on a low voltage (3.7v) device you're not gonna get much TH or vapor?

 

[JonnyVapΣ]

Just wondering, isn't high-ohm better for HV devices? If you use high-ohm attys on a low voltage (3.7v) device you're not gonna get much TH or vapor?

Correct, for the most part.

 

[Kevin Freeheart]

I personally don't think the type of atty makes all that much difference to my vape. There might be differences, but not enough for me to have a preference in terms of say the 901 over the 510.

I do generally dislike LR attys now. I didn't notice a signifigant difference between them in terms of flavor or TH but I did notice how often I had to add juice to the LR ones. So I use all standard resistance now.

I perfer the 510 over the 901 simply because I tend to flood my attys and the 901s drip a lot sooner than the 510s. So the 510s are less messy.

I buy my attys from ValueVapor.com