what is the best coil build for the innokin itaste sdv 2.0

[charlie1465]

I want to get the best out of my variable mod but at the moment I am finding that single coil is way better than dual coil.

I am using 28 kanthal on 2 mm screwdriver at 1.8ohms. Have built several different dual coil builds but was not happy with the vape.

I have 32/28/24 gauge wire. Does any one know of a build which gives good clouds but not too harsh. I am new to this so any help would be appreciated.

 

[Sthur]

Hello the svd 2.0 can handle down to 0.5ohms. I recommend making a dual 28 around a 5/64 bit around 5/6 wraps. It should ohm at 0.6 ohms. Next best is 28 around 8/9 wraps 1.2 and crank it up to 20 watts.

Hope you find a good build. In all its about the airflow, enlarge the airflow if possible too.

 

[Susan~S]

Here are a few links for you regarding building coils and getting the resistance just where you want it:

1. Steam Engine
2. Coil Toy Calculator

For anyone reading who does not have a mod to check their resistance, make sure you use ohm reader or DMM to check your build before putting it on your mod and firing it.

 

[charlie1465]

Thanks for this advice. My problem I think is trying to achieve the best balance taking into account ALL the variables. I will try the 28awg dual around the 5/64 drill bit. I have a revel dripper tank set up by Ephro. It has really good adjustable airflow so this isn't a problem.

The dual coil builds I have tried either eat the battery too quickly or the vape is too harsh. I am beginning to realize that I can't have everything my way.

I will post when I find the best balance for me. Thanks again.

 

[EverythingEvil]

Judging from my experiences with the original SVD, I would have to say that building as low as you can go more than likely won't be the best option you have. I built at .7 for a long time on my original svd, and found that it seemed to be lacking when compared to a 1.2 ohm build cranked up. Likely you will end up finding what you think is best through experimentation.

 

[Larry Anderson II]

Not an SVD, but with my Vamo V5 (15w) I only build single coil. Can never get enough power to get dual where I want on that device. Most common I use is 28g wrapped around a 5/64 screwdriver 9-10 wraps. Good balance for myself at least. Usually comes out to about 1.2

 

[charlie1465]

Thanks for the advice. This is exactly what I am finding... Single coil at 1-2ohms works best considering everything. I have also had success at 2 ohms also. All the dual coils I have tried don't give the best vape.

I am just about to try a single Nano coil... 28awg wrapped 22 times around 24 awg which should come out at about 1.52 ohms. I like the idea of big clouds but they must be smooth and not too hot.

I think that maybe the problem is the regulated MOD (I have the itaste 134 also)and am considering buying a mechanical so that I can play around a bit more.

Cheers