What is this tank?

[Manfishing]

Can someone tell me this tank made by who?


It is very nice and well made but the pre-punched come with it so terrible. I bought 2 of this tank and I got very bad experience with both. The first one didnt work for the first time, it just light up the coil then never light again. The second one worked but it burn my mouth even with 3.7 volt (the carto resitance is 2.9 ohm) , and with 3.0 volt, I still feel some burn taste.


I have changed the pre-punched by using smoktek Dual-coil-cartomizer 1.5 ohm and it work perfectly with this tank.

This tank very solid, well made and it looks like very high quality but how can the pre-punched cartos so bad or I dont know how to use it?

 

[Baditude]

Where did you get the tanks? What battery device are you using with them?


It's possible those are just some bad cartomizers, since the Smoktech dual coils worked well for you. Did the bad cartos come with the tank, or did you buy them from elsewhere?


There's a video on how to set up a cartotank in this link. View it and report back if you filled your carto and tank differently. http://www.e-cigarette-forum.com/forum/blogs/baditude/3710-5-cartomizer-tank-setup.html

 

[supertrunker]

I reckon the pre-punched hole is too big and the tank is flooding it - what's not good about it? Does it gurgle when you draw on it? It looks like a solid well-made tank - maybe use a different cart in it.

T

 

[eratikmind]

Are there 2 of those slots on the carto?

 

[The Ocelot]

That carto looks like the weird ones I accidentally got one time: Frankencarto

 

[Baditude]

That carto looks like the weird ones I accidentally got one time: Frankencarto

That's exactly the thought that crossed my mind. Those are some bad cartos.

 

[The Ocelot]

That's exactly the thought that crossed my mind. Those are some bad cartos.

The tank mine came preinstalled in was very similar.

 

[SupplyDaddy]

Just a plain tank from China. I have several of the same type that I ordered through Zainy.net with those terrible carto's. 1st thing I did was toss out the carto's. No problems otherwise.

 

[r77r7r]

Raven tank from GV? With the CE2? (Frankencarto0


Not the old piece of junk, but the new-improved piece of junk.

 

[Manfishing]

hi bro,

i used lavatube lambo, the fist one i didnt perfill the carto, i just fill the full tank then I absorded few times without turn the battery on then start vaping but it didnt work.

the second one I filled the carto untill juice came out from the bottom hole then fill the tank and stared vaping. I second one i think i did correctly as I do the same with smoktek dual coil a it work great.

 

[SirSteve]

The tank I can't say, the cartos look like the ones I got with the steal I got on the Sigelie V8. Vapor Pheonix sells them, single coil and the ones I got are 2.8 ohm. Mine work pretty good as long as I don't let the juice in the tank get too low, then for some reason they flood slightly. Although I will use up the ones I received, after they are gone I will probably use Boge 510 XL 2.0 that I will punch myself.

 

[Manfishing]

Are there 2 of those slots on the carto?

yes, there are, 2 big slots on the carto. smoktek has only 1 very small hole but it work nicely

 

[The Ocelot]

Raven tank from GV? With the CE2? (Frankencarto0

My tank is a little Smoktech knock-off from Vapor Phoenix. The tank is fine (it's just a plastic tube like any other cheap tank) the problem is the CE2/tank carto/hybrid/WTHISTHAT that read at 2.6ohms and fry at 4v.

 

[The Ocelot]

yes, there are, 2 big slots on the carto. smoktek has only 1 very small hole but it work nicely

The kind with the slots are made completely differently than other cartos.

 

[The Ocelot]

The tank I can't say, the cartos look like the ones I got with the steal I got on the Sigelie V8. Vapor Pheonix sells them, single coil and the ones I got are 2.8 ohm. Mine work pretty good as long as I don't let the juice in the tank get too low, then for some reason they flood slightly. Although I will use up the ones I received, after they are gone I will probably use Boge 510 XL 2.0 that I will punch myself.

The ones I got were from Vapor Phoenix. Adam (the owner) confirmed to me that the cartos are a different style than the single-coil I thought they were:

...they are designed differently than most cartos. They are manufactured by Microcig and have the same type of coil placement as a CE2 cartomizer, which also has a horizontal coil. I also noticed you are running them at 4 volts, which can be a little high for them, despite what the math may say. These SCTs work great on a standard Ego battery at around 3.6-3.8volts, and may solve your problem of overfiring and slight burning. Thank you and VAPE ON!!

I am Vaping On, just not with those cartos.

ETA: I specifically got them because the resistance was higher. If I was looking for a carto for a standard eGo (as he suggests) I wouldn't have ordered these in the first place:

http://www.vaporphoenix.com/Replacement-Cartomizers-26-28ohm-510-SCT-V2_p_58.html

 

[icencream]

The tanks aregood but the carto are probably cheap kinds

 

[SirSteve]

@ The Ocelot, mine didn't come from Vapor Phoenix, and I have been using them at 4v and up. Got one on the spinner right now at 4.5, not something I intend to repurchase though, thanks for the info, I was curious about these odd looking things.

 

[The Ocelot]

@ The Ocelot, mine didn't come from Vapor Phoenix, and I have been using them at 4v and up. Got one on the spinner right now at 4.5, not something I intend to repurchase though, thanks for the info, I was curious about these odd looking things.

You should cut an old one open to see if it looks like mine.

 

[MorbidJeff]

SmokTech Tank and the Carto is called a Slotted Flanged Stovepipe Carto. Stainless Laser Punched Cartomizer

 

[nathkiira]

Raven tank from GV? With the CE2? (Frankencarto0


Not the old piece of junk, but the new-improved piece of junk.

i've been vaping on the raven for 2 weeks now ..in my experience its awesome

massive vapor on 70/30 liquid ...it doesn't look anything like the frankencarto inside