What Mod should I look into?

Status
Not open for further replies.

Pyxt

Full Member
Dec 8, 2013
24
5
USA, NY
Hey! I have an Ego Twist, and I do enjoy it greatly! But I've been looking into spending a bit on a decent mod! Here is my criteria!

Must have an internal battery! I don't want to have to get new ones and replace them.

Must be Variable Voltage (This is a given)

Has to be decently cheap, I am on a tighter budget, but whatever you guys recommend

If it can still fit my criteria, I really want one with an Ohm checker, I've been looking into making my own coils. I've just been building ones for Vivi Nova's, and putting them on an Ego Battery, to get myself practice, and I've gotten quite good, I even managed to get a few successful dual coil set ups!

I'm just looking into upgrading, so I can get into some nicer tanks, and especially into making my own builds, my friend had a quad-coil nimbus build, after using it 2 weekends, I've become obsessed with building coils.

What would you guys say is good for me?
 

amp79423

Senior Member
ECF Veteran
Verified Member
Aug 16, 2013
275
233
Lubbock, TX, USA
I use an Innokin itaste vv/vw 3. I don't know what you mean by cheap, but you can find it between $40 and $50. It is variable voltage, variable wattage, and has an ohms checker. I've also heard good things about the Innokin MVP 2, haven't used one, but I think it meets your requirements. If you are venturing into the world of rebuildables, you may want to consider looking at devices such as the Provari (not at all cheap), VAMO, etc...They are not internal batteries though.
 

fenwaypark1

Full Member
Nov 13, 2013
9
17
Somerville
If you want an APV and you need the battery, charger, etc...there's a place where you can buy a vamo v2...even though they aren't the newest, they are well made and easy to use. I found a place that sells the whole kit for less than $60 with free priority shipping...but IDK if I am allowed to write the url. Or the Sigelei zmax mini is cool too although I still prefer my Stainless steel Vamo!
 
If you want an APV and you need the battery, charger, etc...there's a place where you can buy a vamo v2...even though they aren't the newest, they are well made and easy to use. I found a place that sells the whole kit for less than $60 with free priority shipping...but IDK if I am allowed to write the url. Or the Sigelei zmax mini is cool too although I still prefer my Stainless steel Vamo!
These mods do not have internal batteries though.
 
Also, you might want to reconsider your battery criteria if you want to get into quad coils.

Might I ask why you want to go from an eGo to quads? Just a total curiosity. I am fascinated by the cloud chasers....
I have recently purchased a itaste vv 3 due to my ego going down. I like it but would like to produce more vapor with it or without any cheap recommendations, attys, ohms, batteries, etc?
 

devauto

Ultra Member
ECF Veteran
Verified Member
Mar 13, 2013
1,373
774
NoVA
Hey! I have an Ego Twist, and I do enjoy it greatly! But I've been looking into spending a bit on a decent mod! Here is my criteria!

Must have an internal battery! I don't want to have to get new ones and replace them.

Must be Variable Voltage (This is a given)

Has to be decently cheap, I am on a tighter budget, but whatever you guys recommend

If it can still fit my criteria, I really want one with an Ohm checker, I've been looking into making my own coils. I've just been building ones for Vivi Nova's, and putting them on an Ego Battery, to get myself practice, and I've gotten quite good, I even managed to get a few successful dual coil set ups!

I'm just looking into upgrading, so I can get into some nicer tanks, and especially into making my own builds, my friend had a quad-coil nimbus build, after using it 2 weekends, I've become obsessed with building coils.

What would you guys say is good for me?

I use an Innokin itaste vv/vw 3. I don't know what you mean by cheap, but you can find it between $40 and $50. It is variable voltage, variable wattage, and has an ohms checker. I've also heard good things about the Innokin MVP 2, haven't used one, but I think it meets your requirements. If you are venturing into the world of rebuildables, you may want to consider looking at devices such as the Provari (not at all cheap), VAMO, etc...They are not internal batteries though.

I too agree with this recommendation to meet your stated criteria. I have 4 of the iTaste VVs v2 and v3, and they are awesome for what they are. The cheapest place I have found them is here ITaste VV v3.0 by Innokin, AND they have OUTSTANDING customer service! As always though ... YMMV!

HTH
 

tj99959

ECF Guru
ECF Veteran
  • Aug 13, 2011
    15,116
    39,600
    utah
    Your criteria for the PV is simple, get a MVP-2. It's just a shame that it can't do what you want.

    If you want sub ohm, you need a completely different type of PV. If you want an internal battery, you need to forget about sub ohm. The only internal battery PV's that can do that are DNA or Nivel chip mods ($200+)
     
    Last edited:
    Status
    Not open for further replies.

    Users who are viewing this thread