What model e-cigarette am I using?

[TJennings]

I ordered what was purported to be an EVO CE4 starter kit a month ago and just had the burner go out ( the second burner never worked in the first place ... but I didn't find that out until now ).

I'm new to using e-cigarettes and really like the model that I have ... but have no idea what I need to get it working again as I haven't been able to find any pictures of exactly what I have.



As you can see, this has 4 pieces ( 5 if you count the detachable top black mouth piece ).

There is no wick in this model.

The second piece from the left ( the burner, circled in red ) fits into the 3rd piece from the left which then screws into both the first piece and the last piece.

I've had no troubles with this ( no leaking, no burning flavor, etc ), but now that the circled piece has burnt out I cannot figure out what I need to order to get it working again.

If anyone knows what this is ( supposedly some model of e-go ), it would be much appreciated. Vendors don't seem to have this exact item as far as I've been able to tell.

If you need more information, please let me know. Otherwise, thank you for taking a look!

 

[djsvapour]

w.t.h?

That is a very odd clearomiser.

Never seen one, ever. I "do" clearomisers as well.

I fear you bought a "Lemon"....

 

[Joka]

I would just push it to the side, and retry your Chances with and ego starter kit.

 

[18Wheels]

Looks like a kanger t3:Kanger MT3 EgO Bottom Coil Clearomizer Tank System

 

[18Wheels]

Probably need one of these to get it going again:Kanger T3S Atomizer Head

 

[djsvapour]

It's not an MT3. No way.

$50?

no? $500

 

[ccubed]

Hi and welcome to ECF. Sorry you are having a bad experience. I use Kanger MT3S clearos and what you've shown is not an MT3S (MT3S banding is different, coil is different and MT3S has no removable tip), but I don't know what it is. It may be what others have said, you just got a lemon. Happens sometimes. I would buy another clearo or two and try again. Equipment really sucks when it happens, which is why the folks here suggested to me that I get backups and backups for my backups.

I know you are new to the board, but don't know if you are a new vapor. If you are new, don't let one piece of possibly faulty equipment spoil your vaping experience and tempt you back to analogs. I hope you get some gear that really works for you and allows vaping to be a great experience for you. Good luck and namaste.

 

[djsvapour]

The section in the red circle drawing is completely unknown to me. Clearomisers are certainly my thing, but for the life of me....

 

[pufZeppelin]

I ordered what was purported to be an EVO CE4 starter kit a month ago and just had the burner go out ( the second burner never worked in the first place ... but I didn't find that out until now ).

I'm new to using e-cigarettes and really like the model that I have ... but have no idea what I need to get it working again as I haven't been able to find any pictures of exactly what I have.

View attachment 299372

As you can see, this has 4 pieces ( 5 if you count the detachable top black mouth piece ).

There is no wick in this model.

The second piece from the left ( the burner, circled in red ) fits into the 3rd piece from the left which then screws into both the first piece and the last piece.

I've had no troubles with this ( no leaking, no burning flavor, etc ), but now that the circled piece has burnt out I cannot figure out what I need to order to get it working again.

If anyone knows what this is ( supposedly some model of e-go ), it would be much appreciated. Vendors don't seem to have this exact item as far as I've been able to tell.

If you need more information, please let me know. Otherwise, thank you for taking a look!

well can't say what that brand is, but looks to be a " bdc " bottom dual coil
very similair to the Aspire bdc with the exception of that Large 'RIM' around the top...

I'd move on, but at the same time, get what seems to be the same that way if these "coils"
fit in the unknown tank you will be win, win...

best I got...

- Aspire ET-S BDC - Glassomizer
- http://www.discountvapers.com/aspire-replacement-coils-1/

 

[Nuchuga]

looks like a trippy kanger T3

 

[rurwin]

If it's wickless, then it's closer to the CE5 than the CE4. But I can't find any where the tank is opaque and doesn't taper.

What is the diameter of the battery and tank?

 

[TJennings]

Thanks all!

If I don't receive an answer back from the people I bought it from I'll see about ordering one of those linked up above.

I am new to this ( My mom turned me on to it when she came out to visit this past Christmas ) and have found getting good newbie information to be a real pain .... Being a long time web developer I'm almost thinking I should dig in, do some serious research, and set up a shop that has solid information for those new to all of this.

I don't mind ordering a new set as I find this works nicely and saves me a ton of money( just this month I've saved over $200 ... after buying the initial kit ).

Anywise, thanks again for all of your feedback.

And yes, the non-tapered top seems to be pretty non standard ... The diameter was the same as those my mom has ( somewhere around 3/8 to 1/2 inch just eyeballing it ).

 

[rurwin]

An eGo battery and CE4 are 9/16 inches.

 

[TJennings]

I finally figured out what I have. It is called the Aspire T3 EGO bottom dual coil clearomizer.

Thanks for all the help! I ended up picking up a Kanger T3S and am liking it so far.

 

[Gonzi]

I finally figured out what I have. It is called the Aspire T3 EGO bottom dual coil clearomizer.

To me it did look like an Aspire, except for the top "neck" on the head. If you only have 1 battery, I strongly suggest purchasing something like the Kanger Evod kit that will include 2 evod clearomizers, some replacement heads, 2 batteries and a charger. They go for like $45 in most places and perform great.