what ohms is a solid hit on a 5V?

[gobookee]

Hi everyone....

so... maybe it's the case of bad cartos..... or bad atties.... but lately... my vape production is fading bad on my 5v....
i got a box of 2.0 ohm cartos..... and the vape production is so so..... i tried 3.0 ohm... and all i got was burning ... taste.....yes... fraternity days...... great fun wasn't it?

anyways.... i'm using 50/50 mix and most of my liquids are fruity to candy....and some tobacco........

can anyone recommend or explaine the ohm and what would be a great combo for my 5V HP Saber Touch?

thanks!

 

[RedAlert]

An atty of 2.5 to 3 ohms should do you just fine, or a 3.0 ohm carto. Just be warned, a lot of fruity flavors get killed on higher voltage mods

 

[gobookee]

How about a 1.5 or 1.7ohm atty? Haven't had too much vape peoduction on a dual coil lately.......

 

[RedAlert]

1.5 ohm single coils would be a no no, but dual coils should work just fine(since two 1.5 ohm coils comes out to 3.0 ohms)

I've never had good luck/performance out of dual coils.

 

[Str8V8ping]

You shouldnt be getting burnt taste in a 3ohm since the 2ohm you have should be runnning hotter not colder . The lower the ohm the hotter/higher performance its gonna be . At 5v a 3ohm boge should be perfect . It should be a hot hard hitting vape with lots of popping sounds . 2ohm should be hitting even harder but might be too hot of a vape . ANything below 2ohm wont work because it will put out too much power/watts for your PV/cartos

 

[washvap]

2.5 ohms would be ideal and give you a good warm vape. The only reason why you were getting a burnt taste is because it's dry and you didn't fill it up all the way. If you haven't tossed that one yet, you should.

 

[retird]

3.0 ohm at 5 volts is a real good combination for me (8.4 watts on my Darwin) ....sounds like the burnt taste may be due to not filling the new carto completely, and not keeping it wet....I never get a burnt taste out of mine......

 

[my4jewels]

Every once in a while, I come across a Boge 3.0 that had filler issues, just won't wick. It could be that you came across some of them. Otherwise, I'd have to agree it's too dry. Using a 3.0 at 5V needs lots of topping off to keep it wet. I love my 3.0's in a cartotank, never have to worry about it getting dry. IMHO, 3.0@5V is awesome!

 

[gobookee]

Thanks for the great feedback! I will definitely try the 3ohm cartos........can you guys recommend a good vendor?

 

[washvap]

Sure, here's a great deal on them:

Crystal Clear Vaping

There's also a new option of choosing which ohms you want as well for the 3 boxes you get. So, you can mix and match just in case you have a 3.7V mod you wanna try the LR on.

 

[Str8V8ping]

I just picked up 200 boges . 150 sr and 50 LR straight from bogetech at .50 a piece or 120.00 shipped .Love my boges . Unbeatable performace and quality control

 

[Zurd]

so... maybe it's the case of bad cartos..... or bad atties.... but lately... my vape production is fading bad on my 5v....
i got a box of 2.0 ohm cartos..... and the vape production is so so

I would be worried about killing your carto using 2 ohm on a 5 volts. Specified in the "Atomizer watts charts" it should give you 12.50 watts produced.

 

[Zurd]

An atty of 2.5 to 3 ohms should do you just fine, or a 3.0 ohm carto. Just be warned, a lot of fruity flavors get killed on higher voltage mods

Interesting, I tought everyone agreed that on higher voltage you needed less nicotine and less flavor when vaping on it. I'm in the process of acquiring a 6 volts, think my lemonade or banana cream juice will taste less instead of my 3.7 volts reo?

 

[my4jewels]

I vape just about everything with a 3.0 carto @ around 5V, and I love it. I vape lots of fruity, sweet type juices. I just tried one of my fruit juices at 5.9V, and it's a bit high for me, although it didn't taste burnt in my cartotank.

 

[stevejo]

I just picked up 200 boges . 150 sr and 50 LR straight from bogetech at .50 a piece or 120.00 shipped .Love my boges . Unbeatable performace and quality control

You got a source on those? That would be an awesome way to pick em up and SR and LR Boge's are pretty much my gold standard in vapig, and I can imagine 200 of em lasting me a year or so anyway

 

[gobookee]

Seriously... 200 boges? i need to get me some........

i need to get my hands on a 3ohm..... i tried a 3ohm 510 atty....as a drip...and it was.... let's say.... horrible to say the least..... but do they have DC 3ohms?? i don't think iv'e crossed any of these.....

 

[Str8V8ping]

Dc 3v is gonna need 7v or more to get a good vape . A 3ohm boge at 5-6v is the best hardest hitting vape iv experienced and where i vap most of my juices . If you dont hear snap ,crackling and shooting vapor you havent experienced vaping . When a carto is working great imo you always hear and see that . You actually see vapor sparks shoot out the drip tip like asteroids . I always get it with boges and emdcc's . Id also say 90% of my flavors work best with this combo . I got the 200 boges from bogetech through alibaba .They have ""good"" payment options as well .

 

[CaminoDiablo]

I love my 3.0's in a cartotank, never have to worry about it getting dry. IMHO, 3.0@5V is awesome!

Agree, when using a carto in a 5 volt or higher having a tank is the way to go. Another option is the CE2's or CE3's. You go thru a lot of juice. When at 5 volts I like 2.8 ohms but my best vape is 7.4 volt using a 4.5 ohm.