What range of ohms works well with a Vision Spiner

[digitalmasterc]

I want to purchase a few atomizer to fiddle with dripping. What range of ohms would be suitable for a 1300mAh Vision eGo Spinner. Its volt range is 3.3 to 4.8. Would this be compatible >> Bauway 510 Atomizer, 4.0 ohms? link: www.madvapes.com/bauway-510-atomizer-40-ohms-silver-connector.html

Are Drip Tips all relatively the same? Are there any that hold more then a couple of drops OR ones that are more user friendly? This will be my first attempt and I'd rather not burn out my brand now atomizer or battery if i can help it!
[h=1][/h]

 

[BlkWolfMidnight]

4.0 ohms...let see, to get a descent vape your pushing it up in to the 5.0v range or better.
The magic number is 6.0 watts..
so, its typically like this....Volts times Volts divided by Ohms will give you watts.
At 5v your pulling 6.25 watts of heat.
Basically that atomizer is for a big battery mod. I'd stick with 2.5 ohm, keep the volage at around 3.8 and should be good to go. Also you'll get longer battery life with a lower ohm atomizer, the only exception is a dual coil set up which consumes more amperage to run.

 

[BlkWolfMidnight]

As for drip tips...well that's another topic to go over. Mostly a drip tip is just that, it fits on your atomizer to allow you to draw the vapor. Its kind of personal preference however if you choose not to play the drip tip shuffle then you'll want something with a large hole for dripping.
Cheap plastic tips will melt if you power vape, stay away from those. Metal will heat up to match the tempeture of your atomizer...ceramic is nice and so is glass...I'd see if you couldn't find either one of those as your choice.