What RBA setup do you use for Bobas Bounty?

[Themilkman]

I saw a thread simaler to this however it was closed. Im just currious what some of the bobas setups are out there? I have been using a genesis atomizer at 1.2ohms with about 5/6 wraps 28guage and have noticed that it takes a couple tanks for the flavor to come through, so almost a day and a half for me. I have tried every dripper I own with bobas. The imortalizer, both tridents, Igo L and Igo W. and have not been able to get a micro coil tasting good with bobas( every other flavor I put through a micro coil is great ) its almost overheating the bobas I think, not sure though. I even use less cotton for the wick due to how thick the juice is hoping that would help. I just want the flavor I get out of my HH.357 or my genesis attys after a couple days of use. Let me know what your setup is, Thanks!

 

[xtwosm0kesx]

After many months of tinkering with Bobas (ADV) and different setups, i pretty much settled on drippers.

For me the best coil configuration is a standard wrap (spaced) coil build between .8-1.4ohms (depending on dripper, single or dual coil, airflow set-up, and what im running it on) wrapped around something ~2mm and wicked with cotton (ball).

Micro's, twisted multi-strand wire, ribbon, twisted ribbon etc all gave me issues with either burnt flavor or disappointing performance. As you mentioned all those techniques work fine/without issue for most juices, but Bobas is weird.

 

[alkaiser]

i use it on all my setups (0.3ohm dual microcoil origen and 1 ohm microcoil kayfun lite)

 

[tricci]

1.3 ohm micro coil with cotton wick on a Kayfun 3.1es set to 13 watts on the Semovar, absolutely delicious.

 

[Optimo114]

1.6 ohm micro at 4.2 volts in a Kayfun Lite Plus.. Does me just right

 

[Themilkman]

Thanks guys, it sounds like I might have to try it in the kayfun again. I love the kayfun at 1.2 for about every juice I have tried except bobas! Maybe I will try making a micro coil with a bigger inner diameter for better juice flow and wicking.

 

[VaPreis]

I don't bother to put Boba's Bounty in anything other than my Igo-L, built with a 1.5Ω microcoil, and wicked with cotton. Fire it anywhere from 4.5-5 volts and tastes great. I did drill the air hole on my igo to 1/16"....

 

[scrutineer]

1.3 ohm 2mm mini-coil, cotton wick in a Taifun GT. I try to keep wattage between 11-13.
Used on mechanicals changing bats every 3 hours (Bat ends up being ~ 3.8v at the change)
Better flavor than my Kayfuns.