the evod is 6.25 for a 5 pack and the mt3s is 10.95 for a 5 pack. just wondering what the big difference is between them because they look the same.
whats the difference between evod and MT3S replacement heads?
- Thread starter crashhat69
- Start date
- th_trl_thread_readers 0
- Status
I think it is the stem.
I don't know for sure tho......Order one and change out the stem to see?
It seems to work but read this thread.... http://www.e-cigarette-forum.com/forum/discountvapers/467169-mt3s-vs-evod-heads.html
Cheers
Edit. It's likely won't work. see picture I found.
More discussion found here: http://www.e-cigarette-forum.com/forum/clearomizers/421462-new-kanger-t3s-base-3.html
I don't know for sure tho......Order one and change out the stem to see?
It seems to work but read this thread.... http://www.e-cigarette-forum.com/forum/discountvapers/467169-mt3s-vs-evod-heads.html
Cheers
Edit. It's likely won't work. see picture I found.
More discussion found here: http://www.e-cigarette-forum.com/forum/clearomizers/421462-new-kanger-t3s-base-3.html
Last edited:
Maybe look elsewhere? Try Kanger Coil Heads/Innards
where they're the same price....
Maybe you're looking at the older MT3 NOT S heads, which are one piece, and were typically a bit more?
where they're the same price....
Maybe you're looking at the older MT3 NOT S heads, which are one piece, and were typically a bit more?
The T3S/MT3S head is narrower at the flange above the threads that attach to the base. Thus a T3S head can fit in any Kanger unit, even an Evod or Protank, however the Evod/Protank heads can't fit in a T3/MT3/T3S/MT3S, the base won't set right with a gap, not sealing the tank up.
the head that came with my mothers evod was short unlike my five pack of mt3s heads and her 5 pack of evod heads. the 5 pack of evod heads and mt3s heads look exactly the same. is that normal?
You've lost me, mate. Maybe u can explain it to me as if I were 3? 
I have replacement coils here that I can't figure out if they're evod or MT3 ... I'm abt 75% sure they're evod though. I dont suppose theres a way to tell if they arent side by side?
Man, the main reason I got them was because I thought they were interchangable
Edited to add: I DO know that the T3s isn't compatible, just confused abt the regular old T3
I have replacement coils here that I can't figure out if they're evod or MT3 ... I'm abt 75% sure they're evod though. I dont suppose theres a way to tell if they arent side by side?
Man, the main reason I got them was because I thought they were interchangable
Edited to add: I DO know that the T3s isn't compatible, just confused abt the regular old T3
Ok, to tell the difference between a PT/EVOD head and a T3s/MT3s head:
Right under the wick there is what looks like a round flat metal washer. That washer has a small o-ring underneath it. That metal washer is larger on a PT/EVOD head that it is on a T3s/MT3s head. If you put a PT/EVOD head on a T3s/MT3s base, the metal washer is too large, and you can feel it extending over the part of the base where it is supposed to be making flush contact.
If you look straight down at the two different heads side by side you can see the difference in size of the metal washer. If you put a PT/EVOD head on a T3s or Mt3s base you can feel it. If you run your fingernail up underneath the mounted coil and it catches on the metal washer you but the "big one" on the wrong base. It's not a subtle difference.
Right under the wick there is what looks like a round flat metal washer. That washer has a small o-ring underneath it. That metal washer is larger on a PT/EVOD head that it is on a T3s/MT3s head. If you put a PT/EVOD head on a T3s/MT3s base, the metal washer is too large, and you can feel it extending over the part of the base where it is supposed to be making flush contact.
If you look straight down at the two different heads side by side you can see the difference in size of the metal washer. If you put a PT/EVOD head on a T3s or Mt3s base you can feel it. If you run your fingernail up underneath the mounted coil and it catches on the metal washer you but the "big one" on the wrong base. It's not a subtle difference.
Last edited:
You've lost me, mate. Maybe u can explain it to me as if I were 3?
I have replacement coils here that I can't figure out if they're evod or MT3 ... I'm abt 75% sure they're evod though. I dont suppose theres a way to tell if they arent side by side?
Man, the main reason I got them was because I thought they were interchangable
Edited to add: I DO know that the T3s isn't compatible, just confused abt the regular old T3
T3S heads can be used in any of Kanger's BCC systems, and if you have the T3S base, the base and head will fit in a standard T3/MT3/T3 Mini. Kanger has since the advent of the Protank 2/Mini Protank 2, actually before their release, made it where replacement Evod and Protank heads are both the same. The original Evods had a shorter chimney, and a narrower air flow on the bottom positive post pin. Protank heads will work in Protanks, Protank 2s, Mini Protanks, Mini Protank 2, Mini Protank 2 V2, and Evods. Evod heads will work in all of the devices the Protank head works in. T3S heads will work in any Kanger BCC or tank that uses the Kanger Protank/Evod head, and with the T3S base can convert an older V1 T3/MT3/T3 Mini to a T3S/MT3S/T3S Mini.
Sure, they can be put in - the threading is the same and it will screw in. But that flat washer that is part of what seals the coil to the base is a very different size between a PT/EVOD head and a T3s/Mt3s head.
If you want to use a T3S coil on an eVod, just use the T3S base as well. That's what I've been doing since the T3S came out. Actually, I switch the T3S base and coil back and forth between the eVod and T3S tanks depending on how much juice I want to carry around.
J.R.
J.R.
- Status
Similar threads
- Locked
