which clearomizer will fit a bloog battery?

[jweavers]

New to the e cig thing by about two weeks and interested in getting a cartomizer I can see into to fit my bloog battery.I saw one on ecf that looked pretty good but I wasn't sure what shop it was from.

It also said it was a bloog but also a 808?Anyways don't know all the info on all the models available.

Would still like a clear cartomizer to fill with some liquid I have coming in from BWB.Just don't know which one will fit or work nicely..ie..nice vapor,warm vapor,nice taste.And what shop?

Any advice on where to go would be greatly appreciated.

 

[WomanOfHeart]

If you buy a 510 > 901 adapter it should fit.

Bloog is a KR808D-1 battery. I don't use the Clearomizers, but you can buy them from VaporJunction.com.

 

[JD1]

....Any advice on where to go would be greatly appreciated.

Madvapes is another good vendor and I'm sure there are others. I also recommend starting with the 2.4 ~ 2.6 ohm range. I'm using one now at 3.7v and it works well. Here is a good vid on them if you haven't seen it. YouTube - ‪CE2 Clearomizer Easy fill plug & Tube removal How-to Gotvapes.com‬‏

 

[jweavers]

So I need to choose one in the range to work with my bloog battery?Or does the ohm have anything to do with my bloog battery?
And the kr 808 is not a 510?
Which ce 2 clearomizer?
I'm sorry for the confusion.

 

[WomanOfHeart]

So I need to choose one in the range to work with my bloog battery?Or does the ohm have anything to do with my bloog battery?
And the kr 808 is not a 510?
Which ce 2 clearomizer?
I'm sorry for the confusion.

I would choose the 3.0 for your KR808D-1 battery.
The KR808 is not a 510. The numbers refer to the threading more than the model. You'll need the adapter in order to use these.
The Clearomizer is a CE2. The only thing that changed was the clear container.

 

[JD1]

So I need to choose one in the range to work with my bloog battery?Or does the ohm have anything to do with my bloog battery?
And the kr 808 is not a 510?
Which ce 2 clearomizer?
I'm sorry for the confusion.

The ce 2 comes in different ranges of ohms, so you can match them to your device. I have the 2.8 to 3.0 range and the 2.4 to 2.6 range. The 2.8 range works fine on my 3.7v e-power, but I like the 2.4 better, but it is hotter and may be too hot for some. I'm thinking this is what you want but I'm not sure. (no adapter necessary) See if you can find some youtube vids or e-mail your favorite vendor to make sure. 808-D CLEAROMIZER2.6-2.8 OHM

Edit: I just saw at the bottom of the reviews on that link that someone was complaining about them being too hot. You may want to go with the 2.6 to 2.8 to start.

 

[haft2doit]

If I understand you correctly... The bloog is a kr808 battery. So you would need an 808 clearomizer. Any 808 carto or atty will work with your battery but not below 2.4ohm. 510 clearos will work with an adapter. 901bat to 510 thread. The best resistance for me at 3.7 is 2.4-2.6 ohm clearos. You will need to read up on clearos to get them to work well. good luck

 

[jweavers]

Thanks so much,you guys are invaluable!
I have only smoked one analog since getting my pv on June 8th.I actually happen to have pretty severe panic disorder and woke up and decided I "needed" a cigarette to really calm down.Well,needless to say,I was frustrated and delighted all at the same time.The cigarette actually tasted weak,did nothing for me,didn't help to "calm me down".I came back in the house and got my e-cig,took a hit,and walla,wonderful.
So that's why I'm looking to get a few more things in my vaporing arsenal.I thought the idea of the clearomizer was interesting and I'm gonna give that a go.I think I also might be looking into a bigger battery,but still like the cartomizer set-up.
Anyways,everyone here is very helpful and I'm hoping to be more informed and to keep vaping. thanks again to everyone!