Wicking a low ohm

[Kevin Brown]

I make a "diaper" from an old disposables polyfill
utilizing also the hard silicon sleeve as insulator and a strand of silica as its pick up
i call it the speedy wick
it offers never a dry hit
great dripping in did without pooling

the pictures are not hat clear but im sure you can figure it out

the center post is insulated by the hard silicon sleeve
the polyfill does not touch the coil just a helping strand of silica
plenty of room
the polyfill is wicked from the fill hole which has has ss wick in it
it will attach to the wick like velcro, makes it easy to replace in place when filling
and not worry about the poly fill being sloppy, it goes right back into place
stupid flavor when coiled properly
it will wash out any coil over 2ohms
unless you up the volts and then burn the juice

 

[Kevin Brown]

I chain vape (dont we all) and this method is flawless

sorry about horrible pictures my cam is ancient
i even built a light box
old school free with puter hp 4.1mp cam

 

[jasl90]

the pictures are not hat clear but im sure you can figure it out

Kind of an understatement... All I can make out is the juice bottle.

 

[Kevin Brown]

Kind of an understatement... All I can make out is the juice bottle.

yeah you guys have great cams
hopefully it makes some sense
wanted to help out if I could with wicking
it was my mountain to get it's taste better than a greensmokes cart
was accomplished with this method


this offers therapy im a hobbyist at heart so here I are

 

[EDO]

Sorry you have to do better in your explanation....since the pictures are so blurry. Have you tried to use silica wick instead of ss mesh in genesis atomizers? They wick far better and the taste is very pure if set up correctly. I have made 0.7 ohm coils and they work brilliantly with silica wicks. I know people who have made 0.3 ohm coils using silica wicks in genesis atomizers and they don't get dry hits ever.

Here is a picture of a very nice set up using Nextel wick (I hope pdib doesn't mind borrowing his picture)....you want to set up silica in the same way.
http://www.e-cigarette-forum.com/fo...1617-nextel-xc-116-u-wick-aga-t2-imag1349.jpg

 

[Kevin Brown]

Sorry you have to do better in your explanation....since the pictures are so blurry. Have you tried to use silica wick instead of ss mesh in genesis atomizers? They wick far better and the taste is very pure if set up correctly. I have made 0.7 ohm coils and they work brilliantly with silica wicks. I know people who have made 0.3 ohm coils using silica wicks in genesis atomizers and they don't get dry hits ever.

Here is a picture of a very nice set up using Nextel wick (I hope pdib doesn't mind borrowing his picture)....you want to set up silica in the same way.
http://www.e-cigarette-forum.com/fo...1617-nextel-xc-116-u-wick-aga-t2-imag1349.jpg

i need some better silica
gorgeous
it would fail for my vaping style
I have not drilled it out, the hole is rather tiny
I have a hacked cart coil silica ss wick in it, I uber chain vape i would dry out your silica
I cannot use this speed wick on the hacked coil and wick
which feeds just fine if vaping normally-- so yes your wick is cute to this style
the polyfill aerates flavor most efficiently

there's no doubt about it, it has to auto-drip itself and flavor wowza
the quench area, quadrupled+ (its huge); the semi-split hard silicon sleeve politely helper feeds the wick
a roll over silica wick genesis style loses flavor/adds vapor when consecutive vaping

tear down old cart-- thats it, make it happen

huge flavor guy
I come from pipe tobacco and many great flavors -- it better not lose any flavor because i would be upset then
my pipe gets sweeter every use, if this cannot keep up] fail-- lol