So was wondering what kind of wicking does you all do on the subtank mini?
Scottish roll, S-wick or just push it down to cover the juice holes?
Scottish roll, S-wick or just push it down to cover the juice holes?
Wicking style?
- Thread starter ChasingTheCloud
- Start date
- th_trl_thread_readers 0
- Status
How I wick my v1 rba for subtank
1. Cut cotton a little wider than internal diameter of coil.
2. Peel off top and bottom layer and pull into coil.
3. Insert chimney and cut the cotton just slightly above chimney.
4. Take out chimney. Using a piece of kanthal wire, I fluff up the tails.
5. Replaced the chimney and stuff the deck with cotton.
6. Using kanthal wire, I push back the tail away from the chimney slightly so that the juice channel are not choked.
Subtank mini I'm using is the first iteration. One airflow hole and the v1 rba with tiny juice channel. So far no leak and no dry hit. Main point is fluffiness of the cotton.
1. Cut cotton a little wider than internal diameter of coil.
2. Peel off top and bottom layer and pull into coil.
3. Insert chimney and cut the cotton just slightly above chimney.
4. Take out chimney. Using a piece of kanthal wire, I fluff up the tails.
5. Replaced the chimney and stuff the deck with cotton.
6. Using kanthal wire, I push back the tail away from the chimney slightly so that the juice channel are not choked.
Subtank mini I'm using is the first iteration. One airflow hole and the v1 rba with tiny juice channel. So far no leak and no dry hit. Main point is fluffiness of the cotton.
It's the same haha. I helped my friend build his new subtank with the same method but I ensure that the hole is covered. But still fluffy. No leak no dry hit.
This applies to all rta. Make sure the juice channel is covered but never clogged. Every rta has a limit for cotton so it's up to you to find out the cotton limit. Too little or too much is a nono. The juice channel will be your guide.
For Rda, well... You can go cotton happy but still make sure not to clog the coil with too much cotton.
For Rda, well... You can go cotton happy but still make sure not to clog the coil with too much cotton.
Dont have an rda currently and dont wanna have one
, cause only got subox kit right now and to fix the coil looks so troublesome... 
I'm getting rda! Perhaps velocity. Also started w suboxM, but wanna explore more. I ald save on juice by diy ald. See play w mods and rba/rda. Should be worth investingDont have an rda currently and dont wanna have one
Dont have an rda currently and dont wanna have one
I see I see. But if you ever wanna try a different flavour, It's good to have a dripper tank. Although I'm not sure if dripper can be used on kbox mini haha
the mutation x v4 and wotofo troll can fit but its just a dripper, wanted to buy the mutationv4 but seems hard to build, so im planning to buy the crown tank instead
- Status
Similar threads
