I was looking for info on the wismec luxotic bf squonk box I recieved lately, but I couldn't find any specific information on how the firing button voltage indicator displays, and low voltage protection kicks in. I'm posting this here in case anyone has these same questions. Tests were conducted using a Southwire 10040N multimeter, not the best or the worst out there, a middle of the road, decent multimeter.
4.2 volts
Button lights up for four seconds after firing, solid light, no flashing
3.7 volts
Button flashes very slowly
3.5 volts
Button flashes in 1 second intervals, 4 times
3.2 Volts (may start at 3.3 if I didn't notice it soon enough)
Button flashes faster, maybe 1/2 second intervals, 4 times
3.0 volts
Low voltage battery cutoff Button flashes rapidly when pressed, device shuts off.
4.2 volts
Button lights up for four seconds after firing, solid light, no flashing
3.7 volts
Button flashes very slowly
3.5 volts
Button flashes in 1 second intervals, 4 times
3.2 Volts (may start at 3.3 if I didn't notice it soon enough)
Button flashes faster, maybe 1/2 second intervals, 4 times
3.0 volts
Low voltage battery cutoff Button flashes rapidly when pressed, device shuts off.
