By the way I used twisted 28 gauge wire double twisted from geek vape and on a 2 or 2.5 bit about 8 wraps they come out to .3 or so and at 50 watts they work pretty good,dual coil of course if you want to try a dual coil set up on the cooler side of things;-)
Nice~! Ill try that~ but im a lower warr vapor lol this is my first tank that is dual build cause im a single coil vapor lol
This is what i do and works for me
1) use more amount of cotton (compared to what i usually do) fluff it and i don't stuff it all the way in the juice channels (i don't think it matters much the stuffing part with this rta).
2) do not over prime it
when i refill:
1) close the juice hole, close the airflow,
2) Open the top cap and fill it
3) screw everything in place
4) open the juice flow and airflow (i think that creates a perfect vacuum in the chamber, no more spit back no more juice in the mouth )
this is what works for me i hope it helps
Can u post your build here and tell me what watt ur vaping on~^^?
A little.. it depends on the airflow and how you vape i started mtl @. 15 / 20w then 35 dual coil and now 50w.. And i cant do mtl it feels strange to me
Hi again just wanted to give you a quick update,everything is going good,no more fluding yooo hooo;-) I think I just didn't fluff out my cotton enough so it didn't absorb and just collected in the chamber until it filled up completely,thanks again for all your tips and pics it really helped me out a lot,not every body likes dual coils which in turn run hotter therefor more watts,stick with what works and what you like.
Thanks for all the tips vexx;-)This is what i do and works for me
1) use more amount of cotton (compared to what i usually do) fluff it and i don't stuff it all the way in the juice channels (i don't think it matters much the stuffing part with this rta).
2) do not over prime it
when i refill:
1) close the juice hole, close the airflow,
2) Open the top cap and fill it
3) screw everything in place
4) open the juice flow and airflow (i think that creates a perfect vacuum in the chamber, no more spit back no more juice in the mouth )
this is what works for me i hope it helps
Well in the end~ in the end is Im gonna run mine in a single coil mode~ lol cant handle doubles.....already blistered my lips by burning it lol
Very nice on the yihi 8) thanks for the beautiful postsView attachment 586997 View attachment 586999 View attachment 587001 View attachment 587003 Well just got the Black version of the Sapor! I guess since you guys have done ur research im not get into the specs and etc....
I used the coild they supplied with ~ a dual build and one thing I dont understand is how these reviewers are vaping this thing at 60, 80 watts???! The max i have tried is at 40~ 50 watts and at this level im burning my lips and mouth~ the vapor is frikin hot lol~
So I decided to remove 1 coil and stuff the juice wells with cotton and currently vaping a singe coil build~ and~~~ its amazing!!! The flavor is so clean and dense it literally makes
At a single coile it reads to a 0.33 ohm and vaping it at 35 watts! Not hot but a warm dense flavorful vape! I cant get enough of it! Oh but u need to carry ur juice around cause it is a 2 ml tank and for the bursting flavorful clouds ~ carrying juice to refill is a deal for me!
Others out there who are vaping on a dual coil please help me out here cause i cant stand this heat! Lol
Oh btw the drip tip is ...plastic I think..doesnt feel like delring at all and it broke the second day i got it cause i dropped it from my couch....very fragile but! It does keep the heat off ur lips unlike the SS one!
Help me out guys and thanx!~^^
Yes, mine does wobble. However, in the spares bag, there's a medium sized o-ring. Put it just below the liquid feed slots on the build deck, screw it back together and the wobble is almost non-existent...almost.
How tightly are you putting your cotton thru the coils? Am asking cause I get pops at times,thanks
I should be able to post a pic tonight and I probobably need to rebuild anyways I got a bunch of new wire in also with some new swivels so I will probobably bang out some small core (28g or 30g)316l aliens probably the 30g because 316ls resistance is just too freaking low and on the Sapor my favorite builds have been between .3-.5 sorry I am rambling I like my cotton to have some resistance when pulling through the cotton. Enough resistance to pull the mod across the table if I wasn't holding it down yet to still move freely in the coil its kind of a feel thing. Also i want enough cotton in the wicking ring to cover/fill the very top of the wick retention ring. I want to look at it from the side and able to just see the tips of my wicks peeking out below the ring. I also want the cotton to feel very loose and fluffy to the touch
That would be great,thanks for doing that as well as all the explanations every little detail helps,I have my coils as high up as possible by that I mean close to the air holes like even with the posts as I heard its best for top airflow tanks,it's that dam wicking that' gets me,I get lucky sometimes but still think it could be better,looking forward to your build pics,thanks again..
If you could please include pics of were you cut your cotton,so we can see how much you use as its kind of hard to gauge after its all tucked into place,thank you so much for all you're help;-)
