Ya got me right in the coils

Status
Not open for further replies.

InfernoDude

Full Member
Verified Member
So I know I am missing something here. I am new to building coils. Right now I am dripping with my subtanks rba. dual parallel 26g 4wraps at I think 3mm comes to about.18 ohm. I am using Japanese pressed organic cotton not to tight not to loose. Im not chasing clouds but the denser the vape the easier it is to stay away from the analogs. To the questionsssss

Is there a way to keep vapor production at a higher ohm so I can vape longer without my battery dying?
What can I do to produce more vapor with my setup?
What can I do to the coil/wick to hold more juice? I am dripping a few drops every other hit or else it is burning.


Any help and guidance will be very appreciated. :D
 

Cacique

Super Member
ECF Veteran
May 4, 2014
783
490
Orlando, FL
What kind of mod are you using? If you want super dense clouds I would suggest a cloud chasing RDA like the Mutation X v2. I love mine, got it paired up with a copper SMPL clone and using 25Rs. I'm not sure how much it'll affect your dripping. Right now I have a .24, 1.5 mm coil of 26g, so it's a somewhat thin piece of cotton in there and I re-drip every 3 to 4 hits, depending on how big my hits are.
 

Parahdox

Full Member
Mar 10, 2015
8
0
So to start with your first question, it depends on the voltage drop of your APV, I know my voltage drop for my vanilla is .2 and my VTC4 lasts me quite a while with my .35ohm build.
Second, build a coil with alot of surface area but with a low ohmage. Im using 24g kanthal and have it wrapped around a q-tip 10 times and get around a .3-.4ohm reading.
And lastly for your wicking try pulling apart the cotton or use organic cotton balls. I have a strand that I put through my coils and then made a cotton cloud underneath and it chucks the vapor bro.
 
Status
Not open for further replies.

Users who are viewing this thread