Once again I say hello and welcome to today's review of the SX Mini MQ device from YIHI. This device was sent to me from Sourcemore with a coupon code for my readers that brings the price down to $40.39 when purchased from them, coupon code is SMCM. This device is really feature packed and also a very tiny device compared to other devices that take a replaceable single 18650 battery. The maximum power output of the device is 60 watts and can output 8 volts, for those of you the use temperature control and power curves the SX Mini has that covered, there's also a VT coil mode that is used when using YIHI VT coils that prevents dry hits from occurring. Let's get started shall we.
COLOR CHOICES
IN THE BOX
SPECIFICATIONS AND PARAMETERS
FEATURES
GROVES FOR ATOMIZERS THAT REQUIRE AIRFLOW FROM THE 510
LIGHTWEIGHT
REPLACEABLE SINGLE 18650
FIRST IMPRESSIONS
Being such a full featured device I was surprised the packaging was rather simple with a slide out inner container with the device sitting in a foam cut-out with the charge cord, user manual and warranty card laying below it. I knew the device was going to be small but didn't know it was TINY. I instantly loved it once I picked it up and placed it in my hand. The aluminum body cuts the weight down to a good feeling device that's not heavy or a featherweight either' I find it in the goldilocks realm feeling just right.
I held it in both hands looking to see if either hand made a difference firing the device and I found it didn't really matter but having the spine of the device resting in the crook of my fingers felt better than using it in my right hand. I find this to be a very classy looking device and love the mirror finish of the backside but that fades away quickly because it's also a fingerprint magnet that takes the shine away from the mirror finish.
The buttons all feel great and are responsive with their size being just right improving the mods appearance. On the bottom is where the battery tube and charge port are located. I am not a fan of this style of battery cover being a twist off, threads are fine on it but being so small and me having large hands I can't really get my finger and thumb into the cut outs of the cover, a word of cation to you is don't tighten the cover too tight because it will be a bear to loosen and remove.
The top plate has the 510 pin being offset and not centered which is fine, YIHI also went the extra mile cutting grooves into the top plate for old styled atomizers that require their air from the 510, those old tanks are still in use for some folks and it's nice YIHI thought about them. Atomizers up to 24mm will fit without any overhang.
COLOR CHOICES
IN THE BOX
- 1 x SXmini MQ Class Mod (device only, battery not included)
- 1 x USB Type-C Cable for fast and convenient charging
- 1 x User Manual with detailed instructions and safety information
- 1 x Warranty Card for manufacturer support
SPECIFICATIONS AND PARAMETERS
| Brand | YiHi |
| Product Name | SXmini MQ Class Mod |
| Chipset | YiHi SX416J |
| Battery | Single 18650 battery (not included) |
| Wattage | 1-60W |
| Output | 1-8V |
| Size | 36.7*76mm |
| Quiescent Current | ≤20μA |
| Min Ω | 0.10-3Ω |
| Max Charge | 5V/2A |
FEATURES
- Advanced YiHi SX416J Chipset : Provides high efficiency and reliability.
- 60W Maximum Power : Ideal for various vaping styles.
- Single 18650 Battery : Compatible with quick battery replacement.
- 0.69 inch display : Shows essential information at a glance.
- PURE Technology and NENV Safety : Prevents accidental coil burning.
- USB Type-C 5V/2A charging : Fast and convenient.
GROVES FOR ATOMIZERS THAT REQUIRE AIRFLOW FROM THE 510
LIGHTWEIGHT
REPLACEABLE SINGLE 18650
FIRST IMPRESSIONS
Being such a full featured device I was surprised the packaging was rather simple with a slide out inner container with the device sitting in a foam cut-out with the charge cord, user manual and warranty card laying below it. I knew the device was going to be small but didn't know it was TINY. I instantly loved it once I picked it up and placed it in my hand. The aluminum body cuts the weight down to a good feeling device that's not heavy or a featherweight either' I find it in the goldilocks realm feeling just right.
I held it in both hands looking to see if either hand made a difference firing the device and I found it didn't really matter but having the spine of the device resting in the crook of my fingers felt better than using it in my right hand. I find this to be a very classy looking device and love the mirror finish of the backside but that fades away quickly because it's also a fingerprint magnet that takes the shine away from the mirror finish.
The buttons all feel great and are responsive with their size being just right improving the mods appearance. On the bottom is where the battery tube and charge port are located. I am not a fan of this style of battery cover being a twist off, threads are fine on it but being so small and me having large hands I can't really get my finger and thumb into the cut outs of the cover, a word of cation to you is don't tighten the cover too tight because it will be a bear to loosen and remove.
The top plate has the 510 pin being offset and not centered which is fine, YIHI also went the extra mile cutting grooves into the top plate for old styled atomizers that require their air from the 510, those old tanks are still in use for some folks and it's nice YIHI thought about them. Atomizers up to 24mm will fit without any overhang.
