Hello, and welcome to another review! Today we'll be taking a look at the Hannya II Box Mod by Vapelustion. This is the second iteration of the Hannya box mod line (not including their pod mods) which added a new chassis style, more color options, and more side panel designs to choose from. If an oriental-style aesthetic is something you are keen to, I have a strong feeling that you'd love this mod. I have thoroughly put this this device through its paces and will be going over my experiences in detail down below.

First off, I want to thank Sue from HealthCabin for sending me this piece of art for review. As always, this will be conducted in a fair and honest manner.

You'll find a more brief overview of this mod over at HealthCabin. The pictures from their link speak for themselves.

It’s been a bit of a wait but I’m very happy to be back with another review for Dovpo. This time I was sent the new Limpid Pod Kit in order to provide you with a fair and honest review. I have tested a lot of pod devices and hope that this one measures up as one of the best. The Limpid contains an 800mah internal battery and has a liquid capacity of 2ml. Those seem pretty standard from what I’ve seen from others. The coil in the pod is rated at 1.0 ohm and the Limpid has a max output of 15 watts. One thing I find appealing immediately is that the body is partially see through so you can see the electronics contained inside. This is in fact the very first pod kit from Dovpo. All of these features sound great but the proof is in the pudding so you will have to read further to see how the flavor production was on this one.





WHAT’S IN THE BOX?

1* DOVPO Limpid Pod Kit

1* User Manual

1* Charging Cable

1* QC Card

SPECIFICATIONS:

Product Size: 24.9*14.7*100.17mm

Cartridge Size: 24.9*14.7*21.67mm

Coil: Mesh 1.0ohm

E-liquid Capacity: 2ml

Product Material: PC + The silicone

Battery Capacity: 800mAh

Charging Current: 500mA (Type-C)

Color: Black, Red, Blue, Purple

FEATURES:

1. DOVPO's very first open system pod kit

2. See-through body design

3. 800mAh battery, 15W power

4. Transparent body

5. LED lighting, 2ml capacity

6. Slim body, easy to carry

7. Type-C charging port

8. Safety protections: Timeout/Short-circuit/High Temperature/Low Power/No-cartridge/Overcharge Protection

INITIAL THOUGHTS:

The packaging for the Limpid Pod is simple yet nice just like the device itself. The front of the box has a clear viewing window which I happen to like and shows the device contained inside. Of course the Limpid name is on the front along with a few features listed along the side. The back of the box lists the package contents, company information, authenticity code, and a sticker with the color version contained inside. I was curious about the Limpid name and evidently it means clear and transparent.

Once opened, the Limpid is found inside sitting in a plastic insert with the pod already installed. Underneath the insert there is a user manual, USB-C charging cord, safety card, and a lanyard. I’ve never been a fan of lanyards but guess that some people like them. The charging rate of the 800mah battery is only .5A or 500mah according to the specifications I found but in the user manual it says that it is actually 800mah which would make it charge in about one hour. I will have to connect it to my charging tester and see what it shows. This is probably one of the lowest charging rates I’ve seen on a pod device that I’ve seen in quite a while.

There is only one pod that is included with the Limpid. I always think that pod kits should come with two pods in case one is faulty. However, I can understand that manufacturers do this to keep the cost down on starter kits. Myself, I’d rather pay a couple dollars more to get a kit with two pods/

The Limpid pod is rated at 1.0 ohms and has a liquid capacity of 2ml. When I received the kit there was a safety sticker over the contacts of the pod so that it could not be accidentally fired before the pod was filled. As always, after filling the pod you should let it sit for 5-10 minutes before taking the first puff.

The pod does not use magnets like a lot of pods I’ve seen. Instead it snaps into the Limpid body very securely so that its contacts meet up with the gold plated spring loaded contacts in the body of the Limpid. Also contained inside the opening is the gold air inlet opening since the Limpid is auto draw only. There are no buttons or controls on the Limpid.

I very much like that the pod for the Limpid is a top fill. You simply pop off the comfortable mouthpiece, lift the rubber gasket and tilt it to one side. Fill the pod through the opening with the black gasket and replace the cover gasket and mouthpiece. The rubber gasket does make it an extra step for filling but I definitely prefer this over having to remove the pod in order to fill it like is required with many other pod devices.

The battery portion of the Limpid is clear on the front so that you can see the electronics inside which I personally find very nice. It has the Dovpo name on the front and inside the electronics are four LED lights. They illuminate whenever the pod is inserted or removed. Also the four lights will illuminate when the Limpid is plugged in to charge and will stay illuminated until the battery is fully charged and once it is they will go dark. During normal use the lights will turn red when the battery level reaches less than 30%. If the pod is not making contact or is faulty and the Limpid cannot detect it then the white lights will flash three times.

There is also a child safety lock built into the Limpid. In order to activate the child lock, remove and install the pod five times within 12 seconds. If done successfully then the lights will blink red five times. Do the same thing to unlock the child safety lock. I tried a couple times to do this but I guess I wasn’t quick enough. The pod is difficult enough to remove that it really slowed me down.

FINAL THOUGHTS:

The Limpid Pod is a very simplistic pod with a very nice appearance and performs very well. I personally only use pods at work for stealth vaping and use a diy mint recipe that I mix around 18mg. Normally I would fill one pod with the mint that I use all the time and another pod with another recipe that I am very familiar with to test the flavor production. However, since only one pod was included so I decided to go with the mint recipe since that is where I would get the most use out of the pod.

With a maximum output of 15 watts and the 1.0 ohm coil in the pod it produced a very nice throat hit and the flavor was very good. The airflow, although not adjustable, was a very good fit for me. It’s what I would call a slightly loose MTL vape. It seemed very natural for me and don’t think I would have changed the airflow if I could have.

I really only have one negative thing about the Limpid pod to say and that is that it only included one pod. As far as the appearance and performance goes, I like it very much and it could easily go into my rotation as a favorite.

I’d like to thank Dovpo and Dorothy for sending the Limpid Pod kit for this review. Thanks also to those that have managed to make it to the end of yet another one of my reviews. Below is a link to the website if you’d like to take a look at all of the different Dovpo devices available.

Limpid Pod Kit

hello I have a question. I just bought my vaporesso luxe 2 and i bought a couple of batteries and i cant use the vape because, on the screen, is apprearing the text " Battery error". what should I do?

Dear all,

This is VOOPOO official giveaways and the prize is VOOPOO new products of DRAG series that will be launched on September 9.

Just Post Your First DRAG and we will choose 4 friends and give each of you 1 new product!


To enter:

Post the picture and the name of your first DRAG

Notes:

1. You must be 21 or older.
2. The contest will end on September 8.
3. We will choose the winners randomly.

The innokin ifrit flow disposable combines the taste of fruit, dessert, tobacco and ice, which can bring you the most unique and delicious texture. This disposable adopts a 450mAh pre-installed battery to help the device last, 20mg of nicotine content and 600 inhalations, allowing you to immerse and enjoy it. IFRIT FLOW provides you with 12 flavours, and I will choose a few flavours for you to give a detailed taste explanation.


The first is that Energy Ice uses a mixed fruit flavour. When you inhale it, you will feel a strong energy drink flavour hitting you. During the pumping process, you will feel full of energy and make you The tired body and mind regain their vitality, and when they spit it out, they felt a little cool again.

Vanilla Tobacco is a combination of delicate and mellow vanilla and the original tobacco flavour, which not only makes you enjoy the real feeling of smoking but also feels the sweetness in your heart when you inhale it.

Jungle Juice is also a fruity blend, with sweet cherries and crisp apples complementing each other, with bursts of pineapple and strawberries on the spit.

On the whole, each flavour has its own flavour, and the design of this disposable vape is also very small and exquisite, whether it is in your pocket or in your hand, you can travel easily.

Through buy vape, you can also learn more about the products you may be interested in.

More products recommended:
buy igee a1 smok

Hi, today let's take a look at Innokin Scepter 2 Pod Mod. I will examine in this Test each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Innokin Scepter 2 Pod Mod; Before starting let's see together some special features indicated by the manufacturer:
• Eight different colors of choice
• Light weight and compact size
• 1,400mAh battery for great autonomy
• Double notification LED
• Double activation mode, manual or automatic
• Two selectable power modes
• Side refill
• Precise lateral airflow adjustment (MTL and RDL) without removing the cartridge
• Type-C charging port
• Compatible with 0.5Ω and 0.6Ω S-Coils



► Innokin Scepter 2 Pod Mod; Packaging:
Innokin continues to be attentive to environmental issues and therefore continues to use recyclable materials for its packaging. On the front of the box is an image of the device along with a list of key features. On the back of the box you will find; the packing-list, Q-R Code, Scratch & Ceck and the manufacturer's contact information.



► Innokin Scepter 2 Pod Mod; Packing List:
• 1 Scepter 2 Pod Kit 1,400mAh
• 1 pre-installed 0.6Ω S-Coils Range 12-13.5W
• 1 reserve 0.5Ω S-Coils Range 18-20W
• 1 Usb Type-C cable for charging
• 1 Warning card
• 1 user manual



I very much appreciated the fact that Innokin sent me a spare cartridge including 0.5Ω S-Coil to conduct my test in the best possible way. Thanks!



► Innokin Scepter 2 Pod Mod; Specifications:
• Dimensions: 104.3x27.93x17.62mm
• Materials: Zinc alloy + PCTG
• Double activation mode: Via Fire key or automatic
• Two selectable power modes: Normal and High
• Double notification LED
• Airflow: Side adjustable
• Refil: Side
• Cartridge capacity: 3ml (Standard) 2ml (TPD)
• Battery: Integrated 1,400mAh
• Charging port: Type-C
• Charging current: 5V / 800mAh
• Compatible with 0.5Ω and 0.6Ω S-Coils



► Innokin Scepter 2 Pod Mod; Available colours:
• Pink
• Purple
• Grey
• Blue
• White
• Black
• Rainforest
• Red



► Innokin Scepter 2 Pod Mod; Product introduction:
For this test I received the TPD version kit in black which I really like, but I must say that all eight colors are pleasant with solid colors for a sober and professional look. Scepter 2 is an evolution of Innokin's famous original Scepter. Numerous changes have been made on scepter 2 to make the Vaping experience more enjoyable and performing. In Scepter 2 the same capacity of the internal battery (1,400mAh) has been maintained but with greater autonomy and more compact dimensions. The air flow control is of the lateral type with a very comfortable and effective sliding door. The refill is also of the lateral type, and it is not necessary to extract the cartridge to fill with e-liquid. You can vary the power through two different settings (high power or normal power). Furthermore, Scepter 2 is compatible with two different S-Coils of 0.5 and 0.6Ω for a restricted MTL and RDL restricted Vaping. The Coils take advantage of the quick coupling system into the pod (Push to fit). Another excellent and recent Innokin device shares the same S-Coils with Scepter 2, it is Scepter Tube. Here you can read my recent review: LINK



► Innokin Scepter 2 Pod Mod; how it is made:
Classic form factor and compact size for excellent ergonomics without neglecting the aesthetic side and finishes that are beautiful and refined. The body construction material of the Mod is made of solid zinc alloy. The front panel has a "carbon" style finish above the Fire key. Under the Fire button the body is painted in glossy black and at the bottom you find the inscription "Scepter 2" in Silver. To divide the carbon decoration from the black / glossy paint there is a diagonal bar in silver color with the Fire button in the center with two notification LEDs on its sides. The Fire Button is not protruding, but it is quite detectable by touch. The rear panel is painted black / matt and bears the word "Innokin" at the bottom. Below you can read the operating guide regarding the Fire button and the notification LED:

• Power On / Off: 3 quick clicks on the Fire button
• Power Adjustment: 2 quick clicks on the Fire button to set high (Purple Light) or Medium (Blue Light) power

•• During Vaping, the LED light positioned to the left of the Fire button provides information as follows:
• Purple light: The selected power level is high
• Blue light: The selected power level is normal

•• During Vaping, the LED light positioned to the right of the Fire button provides information as follows:
• Red light: The battery charge level is 10% or less
• Orange light: The battery charge level is between 10 and 30%
• Green light: The battery charge level is between 30 and 100%

•• During charging, the LED light positioned to the right of the Fire button provides information as follows:
• Red light: The battery charge level is below 90%
• Green light: The battery charge level is above 90%
• White light: The battery charge level is 100% completed and the Mod turns off for safety.



► Innokin Scepter 2 Pod Mod; Air Flow Control:
On the side profile of the Mod you will find the 5V / 800mAh Type-C charging port. On the other side there is the adjustable air flow system which is applied directly on the cartridge. Innokin has cleverly created an opening on the upper side profile of the Mod to allow the adjustment of the air flow from the outside via a sliding button and without removing the cartridge from the Mod. Great! The "inverted pear" design allows you to adjust small amounts of air by lowering the sliding button (MTL) while raising the sliding button completely, the air flow that is obtained is of the RDL type.





► Innokin Scepter 2 Pod Mod; Compartment / pod and lower base:
The Compartment / Pod is shaped to keep the airflow adjustable to the outside, so there is no need to remove the cartridge to adjust it. The charging port, on the other hand, is kept hidden inside the compartment. On the bottom of the compartment there are 2 electrical contact pins, 4 small but powerful magnets, and the sensor for the automatic activation of the puffs.

Scepter 2 has a good base and stands up well even when charging. On the bottom, in addition to legal trademarks and logos, there are indications regarding the characteristics of the internal battery.



► Innokin Scepter 2 Pod Mod; Cartridge:
This 2ml cartridge (TPD) is made of dark PCTG and has some white lettering. A cartridge with an increased e-liquid capacity up to 3ml is supplied together with the Standard version of Scepter 2.



The adjustment of the airflow is integrated in the cartridge and as you can see from the image below, there is a cursor button that when raised allows a greater passage of air in tune with the Vaping Mode RDL, by lowering the button you can adjust an increasingly narrow air passage, up to total closure, compliant with the Vaping Mode MTL. The great thing is that you can adjust the air flow at any time and without removing the cartridge from the Mod. By extracting the cartridge you can refill e-liquid through a silicone cap, the side filling hole is generously sized.



In the image below you can admire the beautiful anatomical shape of the spout which is quite small and quite different from the usual flattened and wide shapes that are present on competing cartridges. Once the cartridge is placed in the mod, only the nozzle remains visible, but do not worry, to check that the e-liquid is present inside the cartridge there is no need to extract it, just flip the device and through the Drip Tip you will see if the e-liquid is present inside. On the bottom of the cartridge there are 4 magnets mirroring those present in the compartment.



To work, the S-coils need the threaded adapter visible in the images below, this adapter is included in the kit and every time you replace a coil you will have to unscrew the adapter from the old coil and screw it into the new coil. The coil + adapter complex must be inserted from the bottom inside the cartridge and with a slight pressure.





► Innokin Scepter 2 Pod Mod; Vape Test & Final conclusions:
I was sent the TPD (2ml) version of Scepter 2 which is great, but I remind you that there is the standard version with 3ml cartridge for greater vaping autonomy. For my Vaping test I used "Colonel Custard" e-liquid with 3mg / ml of nic and 50/50 VG-PG. After inserting a few drops of e-liquid inside the coils through the respective chimneys, I installed the coils in their cartridges, I filled both cartridges and I waited about 10 minutes before starting to vape to allow the cotton to absorb well.

• S-Coils 0.5Ω Range 18-20W:
From the very first Puff the flavor was quite faithful and clean with a high vapor production, more than I expected from such a small Coil, but it's no wonder that Innokin's S-Coils are a great choice , at the height of those found on the best tanks with prefabricated coils. With the airflow fully open and with the power boost (Purple Light) the resistance offers interesting performance in RDL. By closing the air flow, a precise and draft-free regulation is obtained, with a decisive increase in Hit even with a low concentration of boost in the liquid. However, if you close the airflow too much it is not advantageous with this coil because the steam tends to heat up too much. To express itself at its best and to function well, it needs a consistent airflow to match this relatively high power of 18- 20W. So with about 50% of AFC opening you get an open, strong and gritty MTL vape, characterized by a marked increase in heat, accompanied by a very good flavor that is in line with the best characteristics of the e- liquid that you will use.

• S-Coils 0.6Ω Range 12-13.5W:
This resistor is the one you find installed by default in the cartridge. I immediately selected the lower of the two available power options (Blue light) which corresponds to 12W of power, compatibly with the battery charge level. With the airflow completely open, the amount of vapor emitted is slightly less than the previous coil and the flavor is not very concentrated. By closing the AFC to 50% there is a noticeable improvement in the quality of the aroma and also in the hit in the throat. This coil also willingly accepts the total closure of the AFC and returns a very narrow Puff MTL but which nevertheless remains fluid and without spitting phenomena. Heat is always acceptable even with maximum airflow restriction. Really good this coil for MTL.

At the end of the test, I found no problems. There are no differences between automatic shooting and manual shooting, they both respond quickly. The Puff is sufficiently quiet, with every degree of AFC opening. The formation of condensation is practically zero, after an interminable series of chain vaping with both coils it has never accumulated. There are no spitting phenomena even after a few days of using both coils. The 1,400mAh battery seems to have an excellent charge range and manages the power curve well even when the battery is almost empty. While charging, you can use the Pass trough function. A full charge cycle takes approximately 120 minutes.

Scepter 2 is a new Pod-Mod project from Innokin with great replaceable coils, there are some interesting features that really make a difference compared to other budget kits. So if you are thinking of treating yourself to a new entry-level Vaping System for MTL and RDL I recommend that you seriously consider purchasing the Scepter 2 Pod Mod.

I would like to thank Timmy and Innokin for providing me with the kit. I hope this review was useful for anyone looking to buy the Innokin Scepter 2 Pod Mod.

Thanks for reading.

Happy Labor Day! Just come to vape shop online to celebrate this holiday with us. For everyone who has worked hard during this time and this precious holiday, we have prepared exclusive discounts for everyone on Labor Day.



Event time:
9.2 00:00 - 9.8 23:59

Discount Content:
$59-5, $99-$9
Free Shipping For Paid Orders Over $99 (Only For Orders From USA Warehouse)

Discount Code:
LABOR

You may also like:
vape juice
disposable vapes

What's the difference?

Dear wholesale customers,

The brand new September is here. Except Healthcabin E-liquid Brand Discount, we’ve also prepared the new round of hardware brand discount – September Brand Discount for you to save more on different brands of e-liquids & hardwares.

Take the chance to join us while offer lasts~

Promotion Details​

• Discount: 3% OFF for selected 10 hot brands
• Date: 5th – 11th Sept, 2022(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart.

Promotion Brands​

UWELL
VOOPOO
LOST VAPE
YUMI
VANDYVAPE
FreeMaX
WOTOFO
KUMIHO
DOVPO
OXVA

With any questions, please feel free to contact your account manager.

Please view the September Brand Discount here.

Imporium Mods Sequel 21700 mech boro mod, engraved delrin body, brass internals. Includes integrated drip tip, authenticity card and factory packaging. What you see is what you get. Mod is in very good, used condition and performs as new.

No trades, thanks. $200 shipped in the US (RRP was $379 from Imporium Mods). PP FF, cashapp, zelle.

Thanks!

Hello once again and welcome to another vape review. Lost Vape has been releasing some great devices and kits as they usually do and the Centaurus Q 200 Kit is one of their latest. This is a device with power modes of more than just wattage so you people using Voltage, Bypass, VPC or TC should be very happy and excited. There are 2 different release's of this kit, one is the kit featured here today that includes the Centaurus Sub Ohm Tank and the other version includes the UB Max Pod Tank instead of the Centaurus Sub Ohm Tank. There's a lot to cover so lets get started looking at some information fist prior to my review and findings good or bad of the Centaurus Q 200 Kit With the Quest 2.0 chipset and Centaurus Sub Ohm Tank.




COLOR CHOICES





IN THE BOX


* 1pc Centaurus Q200 Box Mod

* 1pc Centaurus Sub Ohm Tank (5ml)

* 1pc 0.15ohm UB Max X1 Coil

* 1pc 0.3ohm UB Max X3 Coil

* 1pc Metal Pick

* 1pc Spare Glass Tube (3ml)

* 1pc Spare Parts Pack

* 1pc User Manual

* 1pc Type-C Cable

* 1pc Warranty Card




PARAMETERS





FEATURES


* Coil Material Supported: Nickel, Titanium, SS316, SS904

* Input Current: 1A-40A

* Input Voltage: 6.0V-8.4V

* Power Range: 5-200W

* Screen Pixel: 0.96inch 80*160

* Output Voltage: 0.7V-8.0V

* Coil Resistance Supported: 0.1ohm-5.0ohm

* Body Material: Zinc-Alloy & Stainless Steels

* Battery Voltage: 3.0V-4.2V

* Temperature Range: 200F-600F (100C-315C)

* Battery: Dual 18650 Battery (Not Included)


REPLACEABLE SIDE PANELS





AFFORDABLE OPTION ( QUEST 2.0 CHIPSET ) VS DNA







TYPE-C FAST CHARGING





200 WATTS OF POWER





MUTIPLE SAFETY PROTECTIONS





5ML CENTAURUS SUB-OHM TANK

สวัสดีทุกคน ฉันเป็นสมาชิกใหม่จากประเทศไทย ค่ะพี่พิมแปลค่ะ ขออภัยถ้าดูตลกนะคะ

I have a new pockX box as an upgrade from the metal tube style pockX. My coil needs replaced but when I put in a new aspire coil it will not fire. Was thinking it was a defective coil so I tried it inside my original vape and it works fine there. I have tried two different new coils with the same negative result. I put the original coil back in the pockX tank and it activates but still needs replaced due to the bad taste. What could be the issue?

Ursa Nano Pro is a GAME CHANGER, a Top-tier level Pod System featuring 25W max. output. The first to bundle both integrated coil & changeable coil system in one kit set. Newcomer friendly yet not forgetting user experience for advanced vapers. The bundled 0.8ohm (changeable system) is designed for MTL & Salt Nic users, and the 0.6ohm (integrated system) supports Loose MTL - RL range for the freebase community.



Dimension: 24.0*14.0*94.4mm
Tank Capacity: 2.5ml (2ml for TPD version)
Battery: 900mAh
Battery Voltage: 3.2V-4.2V
Recommended Power Range: 9-25W
Body Material: Aluminum Alloy
Powered by LOST VAPE QUEST Chip
Output Voltage: 1.7V-3.9V
...

Click here for more:

Ursa Pro / Ursa Nano Pro Kit: Lost Vape Ursa Pro / Ursa Nano Pro Kit

CLICK HERE TO BUY UWELL WHIRL S2 POD KIT

Specifications:

• Brand : Uwell
• Model: Whirl S2
• Battery Capacity : 900mAh (Built-in Battery)
• Battery Type: Fixed
• Charge Style: AC/USB

LABOR SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (LABOR15) TO GRAB 15% DISCOUNT STOREWIDE

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.





Test Results
It’s been over four years since I last tested this cell so I thought it was worth seeing if the performance has changed. This is the third version of the 20S, identified by a “3” in the lower left corner of the printing on the wrap.

The 20S3’s I tested performed about the same at 10A and 20A as the ones I tested in 2018. They did not perform as well at 30A though, running for about 20% less time.

Even though I recently purchased these cells I believe their data code shows they were made in 2018. This could be the reason for the drop in performance at high discharge rates compared to the 20S3’s I tested last time. I’m wondering if Samsung 20S cells are still being manufactured.

These are still the hardest hitting 18650’s you can buy for the first few hundred mAh. After that other cells like the Molicel P28A will hit harder since they hold up their voltage for longer due to their higher capacity.

Two 20S3 cells tested out to 2009mAh and 2016mAh, which is fantastic consistency and is typical for Samsung. Both exceeded their 2000mAh rating but only by a little. Samsung cells usually have an actual capacity well above their rating. A loss of some capacity is typical of cells that are left in storage for a long time though so I would not expect the cells I tested to have the same capacity as recently made cells. I have not tested the cycle life of these cells.


18650 Ratings and E-Scores Table:


20700/21700 Ratings and E-Scores Table:


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic



I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests

Frunk Bar is a new member of the disposable cigarette brand. Its innovative appearance and changing tastes make it stand out among many disposable cigarette brands. It is definitely a brand not to be missed.

Frunk Bar Disposable Vape has nearly 15 different flavors. It has a small and slender body like a crayon, but it is equipped with a 500mAh battery inside. It has a pre-installed 2ml e-liquid capacity and can smoke up to 800 puffs. This product does not have A charging port, its built-in battery is enough to support you to pump 800 times. Complete your smoking process with the easiest inhalation activation method. In addition, the e-liquid also contains 20mg of nicotine concentration, allowing you to experience the same feeling as when you smoke a cigarette.

Just a few of the flavors: Frozen Grape is a fresh grape flavor with a cool breeze that gives you not only a sweet and sour feeling but also a cool breeze.

Banana Freeze has a menthol banana flavor that combines the sweet and creamy aroma of bananas with cool menthol for a rare experience.

Raging Bull tastes like sour soda and is inspired by the flavors of energy drinks that instantly hit your brain and leave you feeling awake.

You'll also want to know:
moti piin 2 disposable

super stix disposable

The joyetech evio c2 is an upgrade from the joyetech evio c. In terms of performance, they both have an 800mAh internal battery and both are also compatible with the 2ml evio c pod. With the type-c 2A charging cable, you can quickly fully charge the unit in less than 30 minutes.


The special thing about this pod, of course, is that you can change the size of the airflow by rotating the pod. 0.8ohm EN Mesh Coil also gives you a silky smooth MTL vaping. The coils used this time are modified, so there will be a more precise flavour as well as a more consistent output.

To better alert you to the battery level, you are also provided with indicator light. A green light indicates a high battery level, blue light is medium and a red light indicates that the charge is about to run out.

If you want to find out more about the special offers you can also go to uk warehouse.

Features
• 800mAh Integrated Battery
• Indicator Light
• 2mL Vape Juice
• Side Fill System
• Turn the Pod by 180° to Change Airflow
• Button Or Inhale Active
• Type-c 2A Fast Charging
• 0.8ohm EN Mesh Coil

You may also like:
hot sale geekvape t200
buy voopoo argus xt kit

The Vibez Air NFT Bored Ape Disposable Pod Device features a 11.0ml e-Liquid capacity which can last up to approximately 6000 puffs! The Vibez Air NFT Bored Ape is a new modern design.

Features
• Bored Ape Iconic
• 6000 Puffs
• 11ml Capacity
• 5%(50mg) Synthetic Nicotine
• Rechargeable Battery
• Type-C USB Port
• Mesh Coil
• MTL Draw
• Draw-activated

The Vibez Air NFT Bored Ape disposable vapes near me is prefilled with 5% Synthetic Nicotine E-liquid. The Vibez Air NFT Bored Ape features no buttons and is automatically activated when you inhale.

The Vibez Air NFT Bored Ape features an incredibly small and compact vape pen design for easy portability and use.The Vibez Air NFT Bored Ape also features a bottom Type-C Charging port for fast charging capabilities.You could visit Vape Shop Online Near Me, Best Online Vape Store For Sale to buy.

You may also like:

Geekvape Max100
smok nord 5 release date New York

IGEE A1 Kit is powered by a built-in 650mAh battery with 14W output and Type-C charging. Designed with the single LED indicator with four colors varying, it can clearly show you the real-time state of the device. The dual-side airflow can also bring you an intoxicating taste. Fit for IGEE Meshed 0.9Ω Pod, IGEE A1 can bring you faster heating, fuller atomization and ultimate flavor. It also features 2ml e-juice capacity, easy top filling system and leak-resistant technology. With the childproof lock design, it will bring you worry-free use.

SMOK IGEE A1 Kit Giveaway, 1 winner, ends on Sept. 15th, 2022

Enter here