Verey's Mad Building Logs.

So yesterday I couldn't resist any longer and despite not having the preferred materials went ahead with a build. http://youtu.be/KqmO4h0ZeWM Very simple design but works extremely well considering the plastic that covers the copper strip you touch is a bit of the plastic bag the USB cable...

So here I am again after a bit of absence from my blog. I have had a few medical issues but have also been busy looking at parts and deciding what to do next. I was going to make a genesis style tankomizer, but as yet don't have the materials I need to make a mini lathe at home for working...

Well this week I looked at the results of the little market research I did about my first mod. With this information I dismantled my mod and rebuilt it closer to the majority ideas that came from the feedback as much as I could. The battery connector is now central on the top, the led is now...

The next box will probably take a while as I want to be very careful at refining the build and making any improvement I want. Having said that, it shouldn't be an age away, I don't have too many issues to iron out and then I may make a few to sell to people - but working out cost is another...

After the first build I have been thinking about the build, what I did and what could be done better - it was my first and I learned a great deal. Firstly, I now know some of the components need to be fixed in place in the box before soldering any wires to them because with wires attached...

For those with an interest, here is what I used discounting bits and pieces that I have forgotten about no doubt. 1 x Giant case already wired for parallel 18650's 1 x USB 5V Lithium Li-ion Battery 1 Cell Charger board 1 x SPDT Submini Slide Switch Rated 3mps at 125VAC. 1 x 3mm standard...

So I couldn't resist doing a quick video of my first creation !:2cool: YouTube - TheFirst It now needs a name - I am taking suggestions over here:rickroll:

Got everything technical done last night, all I have left to do now is cosmetic work (polishing etc.) and having a really good vape with it - and with those batteries, it really will be a good long vape !:party: Will also do a short video at some point showing it working - will have to get...

So it's time while the epoxy is curing to start getting the wiring all ready to go for the assembly stage. I'm a bit overcautious with stuff like this so I lay everything out first and judge wire lengths before I start soldering parts together.:) Having got all that sorted in my head I...

So i got out the milliput and made up a small ball of the stuff - trey recommend gloves but i can never be bothered with that.:p Then I pulled a little off and sealed the rectangular slot on the top where the original usb hole resides. In a couple of hours it will be still soft enough to make...

So I have my layout done so it is time to cut holes in my lovely virginal box so I can fit the parts. Combination of drill, knife and mini grinder to achieve this, being as careful as possible not to destroy the box completely. You an see I've drilled a hole through for the button to stick out...

Wanted to keep a record of all the things I am getting up to mod wise. Also thought it would be good to make the occasional video of the things I'm doing rather than just photos. This has led to the creation of a cobbled together monster - I give you FrankenCam ! :facepalm: I had an old...

So now I have the parts, and I added a master on/off slide, here is the final diagram of the wiring needed to build the mod.:2cool:

All the major parts are finally here for my first box mod ! Only missing some black milliput and a new multimeter as the old analogue has some loose wires that I only managed a temporary fix on. Still I tested parts as they arrived and everything should work just dandy. I plan to keep this blog...

Hello to all. I am a fairly new vaper who used to be quite a heavy smoker for more than a decade. Due to ongoing health issues I thought it would be a good idea to quit smoking but previous attempts were less than successful due to heavy physical dependency. Vaping is my salvation, since the...