Got the wife's AnyMOD on Friday!! Very impressed!!
Pros:
1. It works extremely well!! I'm impressed, especially for the price. I will say that it seems to read about .1-.2 ohms higher than my eVic (this could be due to additional contacts for the mechanical circuit).
2. The screen is identical to the evic but the plastic does not wrap around the entire body, only the front.
3. The screen is about 3-5x brighter than my eVic also which is really nice.
4. It is about 2.3 ounces heavier than the eVic and about .5" longer
5. The paint seems to be a rubberized flat paint, which is nice since it provides a little more grip.
6. Single button control similar to many mods on the market today. Button seems very solid and high quality.
7. USB Passthru IN and OUT - I suppose for charging a phone from the device or allowing multiple devices to charge from 1 USB port.
8. The AnyMOD works great!! Everything we have thrown at it seems to work very well. We don't have any sub ohm stuff to try the mechanical side out yet, but will be ordering a kayfun soon and will test it out
Cons.. The options seem that they could have a few more things added to make it really nice. There is no puff counter for folks that would like to have one. The Vape timer counts full seconds, but goes away before you have time to see it. It goes into sleep mode and shuts off on its own (no setting to change) and a few other small things. I think that AnyVape wanted to get this out ASAP so they didn't include the manual (it probably hasn't been translated yet), But I was able to figure everything out in a matter of 10 minutes.
Over all this is an awesome device and seems very solid, I may purchase one for myself when they get another batch in.
Here are the menu functions that WORLDofVAPE - Best Vape - Best Price wrote up.
Instruction:
This MOD is so new that it does not have yet a translated instruction manual - below is a quick set of instructions on how to use it
How to use the button to access the fetures:
"Button Click" Summary:
5 Clicks to turn it on and off
3 Clikcs to enter the menu and to exit the menu
2 Clicks to enter the Quick Setting Mod
Press and hold to Vape
When in the menu:
1 Click to select the next value
2 Clicks to select a value (enter sub menu)
3 Clicks to exit menu
When on:
Press and hold button to vape
2 Clicks to enter or exit the quick setting feature to change the voltage or wattage
When in Quick Setting: (the voltage or wattage indicator background is highlighted)
1 Click to set the next value (e.g.: from 3.4V to 3.5V)
Hold button to quickly cycle through the values (from 3W to 18W and back to 3W or from 3V to 6V and back to 3V)
2 Clicks to exit the quick setting feature
Menu Description:
Sleep: put the device to sleep - wakes up when clicked
Power Off: shuts the device down - can be turned back on again by clicking 5 times.
Model Set
VV Model: Sets the Variable Voltage mod - the home screen will display the voltage output
VW Model: Sets the Variable Wattage mod - the home screen will display the watttage output
MOD: Sets the unregulated mod (mechanical mod) - the home screen will display the current battery voltage
Screen
15 sec: the screen will stay on 15 sec after using the device
30 sec: the screen will stay on 30 sec after using the device
...
3 mn: the screen can stay on for up to 3 mn after using the device
Atomizer Resistance: checks & display the atomizer resistance
Battery Info: checks and display both the current battery voltage as well as the current charge % of the battery (e.g.: 3.6V & 35%)
Device SN: Display the device Serial Number
Discharging: Enters the Power Bank Mod (discharge the battery to recharge an iPhone for example)
Features:
Beautiful LCD screen to operate the device - very similar to the eVic screen. No more 1980's LED screen like so many other devices.
The screen elegantly displays the resistance of the atomizer - the battery charge and either the voltage or wattage currently selected.
Regulated mod of operation (Variable Voltage & Variable Wattage) for the best vaping experience with any eLiquid/atomizer combination.
Variable voltage from 3 to 6 volts.
Variable Wattage from 3 to 18 watts!
Unregulated mod of operation (mechanical) when used with low resistance atomizers.
Visual Operating System (We have no indication yet that the OS will be upgradable using a computer - we are waiting for confirmation).
No usage data synchronization like the eVic (this is a good thing - the monitoring was a bit of a gimmick which folks did not use after the novelty effect was passed).
Safety: Output Short Circuit Protection - Output Open Circuit Protection - Overtime Working Protection - Low Voltage Protection - Device Temperature Monitoring.
Threading: 510 and eGo compatible
Its power bank function allows you to charge your iPhone, iPad, Android OS device, Smart phones, etc. When charging a phone the AnyMOD cannot be used to vape at the same time.
The single button interface is very easy to operate: 1 click to select the next value (hold the button to quickly scroll through values) - 2 clicks to select the value - 3 clicks to get in and out of the menu.
When on - simply double click to change the voltage or the wattage - no need to get into the menu for that! Very smartly done.
Pros:
1. It works extremely well!! I'm impressed, especially for the price. I will say that it seems to read about .1-.2 ohms higher than my eVic (this could be due to additional contacts for the mechanical circuit).
2. The screen is identical to the evic but the plastic does not wrap around the entire body, only the front.
3. The screen is about 3-5x brighter than my eVic also which is really nice.
4. It is about 2.3 ounces heavier than the eVic and about .5" longer
5. The paint seems to be a rubberized flat paint, which is nice since it provides a little more grip.
6. Single button control similar to many mods on the market today. Button seems very solid and high quality.
7. USB Passthru IN and OUT - I suppose for charging a phone from the device or allowing multiple devices to charge from 1 USB port.
8. The AnyMOD works great!! Everything we have thrown at it seems to work very well. We don't have any sub ohm stuff to try the mechanical side out yet, but will be ordering a kayfun soon and will test it out
Cons.. The options seem that they could have a few more things added to make it really nice. There is no puff counter for folks that would like to have one. The Vape timer counts full seconds, but goes away before you have time to see it. It goes into sleep mode and shuts off on its own (no setting to change) and a few other small things. I think that AnyVape wanted to get this out ASAP so they didn't include the manual (it probably hasn't been translated yet), But I was able to figure everything out in a matter of 10 minutes.
Over all this is an awesome device and seems very solid, I may purchase one for myself when they get another batch in.
Here are the menu functions that WORLDofVAPE - Best Vape - Best Price wrote up.
Instruction:
This MOD is so new that it does not have yet a translated instruction manual - below is a quick set of instructions on how to use it
How to use the button to access the fetures:
"Button Click" Summary:
5 Clicks to turn it on and off
3 Clikcs to enter the menu and to exit the menu
2 Clicks to enter the Quick Setting Mod
Press and hold to Vape
When in the menu:
1 Click to select the next value
2 Clicks to select a value (enter sub menu)
3 Clicks to exit menu
When on:
Press and hold button to vape
2 Clicks to enter or exit the quick setting feature to change the voltage or wattage
When in Quick Setting: (the voltage or wattage indicator background is highlighted)
1 Click to set the next value (e.g.: from 3.4V to 3.5V)
Hold button to quickly cycle through the values (from 3W to 18W and back to 3W or from 3V to 6V and back to 3V)
2 Clicks to exit the quick setting feature
Menu Description:
Sleep: put the device to sleep - wakes up when clicked
Power Off: shuts the device down - can be turned back on again by clicking 5 times.
Model Set
VV Model: Sets the Variable Voltage mod - the home screen will display the voltage output
VW Model: Sets the Variable Wattage mod - the home screen will display the watttage output
MOD: Sets the unregulated mod (mechanical mod) - the home screen will display the current battery voltage
Screen
15 sec: the screen will stay on 15 sec after using the device
30 sec: the screen will stay on 30 sec after using the device
...
3 mn: the screen can stay on for up to 3 mn after using the device
Atomizer Resistance: checks & display the atomizer resistance
Battery Info: checks and display both the current battery voltage as well as the current charge % of the battery (e.g.: 3.6V & 35%)
Device SN: Display the device Serial Number
Discharging: Enters the Power Bank Mod (discharge the battery to recharge an iPhone for example)
Features:
Beautiful LCD screen to operate the device - very similar to the eVic screen. No more 1980's LED screen like so many other devices.
The screen elegantly displays the resistance of the atomizer - the battery charge and either the voltage or wattage currently selected.
Regulated mod of operation (Variable Voltage & Variable Wattage) for the best vaping experience with any eLiquid/atomizer combination.
Variable voltage from 3 to 6 volts.
Variable Wattage from 3 to 18 watts!
Unregulated mod of operation (mechanical) when used with low resistance atomizers.
Visual Operating System (We have no indication yet that the OS will be upgradable using a computer - we are waiting for confirmation).
No usage data synchronization like the eVic (this is a good thing - the monitoring was a bit of a gimmick which folks did not use after the novelty effect was passed).
Safety: Output Short Circuit Protection - Output Open Circuit Protection - Overtime Working Protection - Low Voltage Protection - Device Temperature Monitoring.
Threading: 510 and eGo compatible
Its power bank function allows you to charge your iPhone, iPad, Android OS device, Smart phones, etc. When charging a phone the AnyMOD cannot be used to vape at the same time.
The single button interface is very easy to operate: 1 click to select the next value (hold the button to quickly scroll through values) - 2 clicks to select the value - 3 clicks to get in and out of the menu.
When on - simply double click to change the voltage or the wattage - no need to get into the menu for that! Very smartly done.
Last edited: