TAIFUN GT O-RING SIZES
17 x 1.5 are at each place where the end of the tank seals..
12 x 1 mm on the chamber cap.
11 x 1 mm or 12 x 1 mm under the sliding sleeve.
4 x 1 on the end of the chimney (fill line).
2 x 1 mm under the 510 screw's head.
5 x 1.5 mm goes on the drip tip
Buna or Nitrile
Here's where I buy mine:
http://www.oringsandmore.com/
Note: 11 x 1 mm on most, 12 x 1 mm on some (under sliding sleeve)
I've heard that on some clones that the chimney is pressed into the tank top, most are one piece.
17 x 1.5 are at each place where the end of the tank seals..
12 x 1 mm on the chamber cap.
11 x 1 mm or 12 x 1 mm under the sliding sleeve.
4 x 1 on the end of the chimney (fill line).
2 x 1 mm under the 510 screw's head.
5 x 1.5 mm goes on the drip tip
Buna or Nitrile
Here's where I buy mine:
http://www.oringsandmore.com/
Note: 11 x 1 mm on most, 12 x 1 mm on some (under sliding sleeve)
I've heard that on some clones that the chimney is pressed into the tank top, most are one piece.
