Stripped IPV4 MOD
- Thread starter Ptrish77
- Start date
- th_trl_thread_readers 0
- Status
Yes some pictures be nice if you're asking for input. Are the threads stripped? Do tanks just come free of the mod with a little nudge or can't even screw them on? I once had the threads of a tank come off and remain lodged in the 510 of my vamo (while back 
) preventing other tanks to be screwed on.
) preventing other tanks to be screwed on.
I replaced my 510 with a fat daddy on my ipv 2. Cost me like 5 bucks shipped on ebay. There are different kinds so open it up and compare it to the space to have. I didn't use the set nut because it was a right fit so I put some jb weld on the top between the 510 and hammered it on slowly. It's been good for months now, no issues.
Last edited:
Oh yeah, to remove the old one, I used a pair of vice grips. The 510 was press fit. So I put a socket larger than the 510 on the outside of the case, and used the vice grips on the top of the socket and the bottom of the 510 inside to force it out into the socket.
- Status
Similar threads
