Hello! I really need help with my mod

[Shone]

Hello, im new to this forum.
I searched all acros the internet and never found ssimilar problem to mine.
Im using kamry 30 v2 mod.
for 2 weeks i used panasonic battery 2250mah, 6A, then i heard some advices to not using this battery cuz my mod can explode when i change over 23w, im using 0.5ohm coil.
so to day i bought avatar 20A battery and my problem is next.
with this new battery i feel burned taste no matter what wattage i put, lets take 23w. its burned taste on new battery, then i put back my old panasonic battery and theres no burned taste on 23w.
So please, any explanation about this?
ty very much in advance, im on edge to go back to cigs cuz of this.

 

[Bonskibon]

Never heard of that battery. I probably wouldn't use it. Here is a list of batteries common here on the forums and tested by Mooch, our battery expert.

 

[Shone]

u mean on avatar baterry? the full name is avatar electronics 2000mah 20A

 

[90VG]

Lower your watts. I can use an almost dead battery at 90W and I get nothing (on a regulated mod), put in a real charged battery and the RDA is blowing clouds. If you got used to an under performing battery at 23W, you might have been actually vaping at less.

 

[Shone]

so bassicaly the problem is in panasonic battery? if i understand u good no matter that mod says im vaping on 23w it could be 10w? as well on the panasonic battery when im changing from 15-28w always i notice difference but without burned taste.
i fell like my problem is uniqe.

 

[90VG]

It's easy to test, set it at 10W and go up 2-3 watts at a time. Let us know!

 

[Shone]

i did it. panasonic still works perfectly fine, i mean no bad taste but thers changing taste as i changing wattage. with avatar almost always after 2nd puff there is burnt taste.
Guess theres no fix for my problem, ha?
one more question, is it dangrous using this panasonic?

 

[DingerCPA]

Welcome @Shone. Just because a coil is rated to run at a specific power level doesn't mean that you *have* to run it that hot. The Panasonic is fine for lower-level use, but take heed with the recommended batteries. Just because a label "says" it's rated for a certain level doesn't mean that it truly is. There are a lot of re-wraps out there, and they often put the MAX pulse rating, not Continuous Discharge (CDR) to lure folks into buying them.

If you continue to use the avatar, just turn it back and see where you land that it no longer burns.

 

[Shone]

thanks for replays.
i understand what u saying me but its a little strange that different batteryes doesnt give same taste on same settings isnt it? is it true infomation that i have for panasonic that it can explode if i pull out more amps?

 

[Topwater Elvis]

Certainly could become dangerous using an insufficient CDR cell or exceeding the CDR of any cell.
Which you are doing when using the panisonic.

 

[Shone]

Certainly could become dangerous using an insufficient CDR cell or exceeding the CDR of any cell.
Which you are doing when using the panisonic.

so this panasonic battery isnt good?
Im really sorry for stupid question but im vaping 2 weeks so far, and im still very noob at this.
Dunno what to do now, im kinda confused with all of this.

 

[90VG]

Try the new battery at 10 watts, and slowly increase. Figure out where it tastes good.

 

[Shone]

thers no burn taste around 14w. but now i dont have this much "smoke" as i have on panasonic on 23w.
Maybe my mod isnt work well?

 

[90VG]

Might be, see if you have a buddy you can test your tank on, same battery/their battery, try all the possible combinations.

 

[Shone]

i just changed coul and it works good on both batteryes. But why with my first coil i felt burned taste with avatar but not with panasonic...?

 

[90VG]

When you have a funky coil, you have a funky coil. Results are undefined.....

cout << ++a << "," << --a;

 

[Shone]

When you have a funky coil, you have a funky coil. Results are undefined.....

cout << ++a << "," << --a;

can u pls explain me this better?

 

[90VG]

If your coil is weird, loose, gunked up, etc, it can do almost anything at any wattage.

the "cout" thing is C++ (Computer nerd talk) for undefined behavior.

 

[SteveS45]

Once a coil is burned it needs to be replaced. Nothing you do will get rid the the burned taste except starting off with a new coil and slowly increasing the wattage to find the sweet spot.

 

[BrotherBob]

Hello, im new to this forum.
I searched all acros the internet and never found ssimilar problem to mine.
Im using kamry 30 v2 mod.
for 2 weeks i used panasonic battery 2250mah, 6A, then i heard some advices to not using this battery cuz my mod can explode when i change over 23w, im using 0.5ohm coil.
so to day i bought avatar 20A battery and my problem is next.
with this new battery i feel burned taste no matter what wattage i put, lets take 23w. its burned taste on new battery, then i put back my old panasonic battery and theres no burned taste on 23w.
So please, any explanation about this?
ty very much in advance, im on edge to go back to cigs cuz of this.

Welcome and glad you joined. Heres a little battery information.
Might like to read:
18650 Battery Buying Guide for Vapor Users – Wake and Vape Blog
(9) Battery Basics for Mods; the Ultimate Battery Guide | E-Cigarette Forum
Calculating battery current draw for a regulated mod | E-Cigarette Forum
Battery Safety: Will You Marry Me? - Mt Baker Vapor