Search results

Thanks, If the diameter is too great the atomizer base hits the top of the battery which prevents it from going all the way down parallel with the battery. Just a cosmetic thing, but I'm not sure what would happen if the atomizer was squeezed further against the battery.

Darn... I was hoping they were 16.5mm, the same as the GS-Air. Anything any wider than 17mm won't let the Bending Adapter work correctly on their 20W device.

The Eleaf GS Air-M shows the diameter as 16.5mm, but the Eleaf GS Air-MS (Shorty) shows the diameter as 19mm and includes a note which states (same width as GS Air-M) which is 16.5mm. Which diameter is correct for which model?

Sometime you can get them free at Harbor Freight, or at least in the $1.00 to $5.00 range with discount. Check your local newspaper (Usually Sunday) for coupons. Go to www.harborfreight.com and do a search for voltmeter. Yes, these are cheap meters, but the circuitry for determining...

Yes it is safe to charge with a 2A wall wart. I charge mine that way all the time. A device will only draw the amount of current that the engineer designed. You could actually use a source of 1000A with no problem. Look at your house; you can plug in a 3W night light or a 1500W electric heater...

Here is another little device you might want to add to your tool kit. Well worth the price and DealExtreme offers free shipping. I always had problems knowing what the output of a USB device was and this solved that problem. Measures both volts and amps. When plugged in to a USB connector...

I found an easy way to make a batch of wicks all at once... I opened up the cheesecloth on the bed and cut a slit a foot or so long 32" up its length. Then I pull the threads out in pairs and lay them on the bed. After I have 6 or 8 pairs I take each pair and fold it in half, then in half...

Not all. The ones I have (3) are reasonably stable considering how much they cost. It's the cheap leads more so than the meter itself. Make sure the banana plugs and tips are as clean as you can get them. I wipe them off with a rag dampened with WD40 every once in a while which cleans them up...

Sorry... Yes, the first link is to Harbor Freight Tools Home page. This supplier has a wealth of items that can be used in our hobby at a reasonable price. Also be aware that MOST, but not all, items are from China. As you browse this forum you will find many references to Harbor Freight. DMM...

I would strongly suggest you test the rebuilt head before you put it on the battery. One leg of the coil, which is the positive side, goes very close to the shell, negative side, and if it, the positive side, touches the shell you could do permanent damage to the battery. If you have one...

My first T3 coil lasted 20 weeks. It would have lasted longer except I broke it trying to get the old silica wick out the first time. My current T3S has lasted 12 weeks and is still going strong. I do a thorough cleaning (coil and tank) and a dry burn once a week.

Harbor Freight is where I get mine... http://www.harborfreight.com/catalogsearch/result?q=digital%20volt%20meter I got this one for atomizers only. His stock goes fast so you have to check back often, but it's worth the wait. http://www.madvapes.com/cartomizer-and-atomizer-ohm-meter.html

Check Harbor Freight for good, cheap ones. http://www.harborfreight.com/catalogsearch/result?q=digital%20volt%20meter The picture of the one buzzzlove posted can be had from Free to less than $6. Just keep an eye on the HF ads.

Also you will get inaccurate reading from a DMM if your device outputs PPM or PWM voltages since these voltages are constantly switching on and off. PPM and PWM explained here: PPM VS PWM - YouTube

Found this in today's paper: www. newsobserver .com/2013/08/05/3084399/whether-e-cigarettes-are-a-good.html Whether e-cigarettes are a good idea remains a question | Health & Wellness | NewsObserver.com

Use AdBlock Plus, a plugin for Firefox. I don't get any ads on YouTube or anywhere else. Yes, I know, some web sites survive only because of their ad revenue, but then I mute the commercials on my TV, too. So, sue me.

I bought a base and 5 pack of coils from Sun-Vapers and converted my T3 tanks to T3S. My spare T3 bases are now sitting in a corner as backups.

RoseB, now look what you've started...

I love that cup, Ben. Where can I get one?

To me going from the T3 to the T3S is good news, not bad. It's like not having to buy a new car when the ash tray gets full (you older smokers out there will know the joke).