ohm meter

Hey y'all, as the title says, I'm new to vaping and have 0 idea what is what. I currently have a KangerTech SUBOX Nano. I've used it a little bit but I've encountered a problem. My ohm display is reading 6.3 and has gone has high as 7.0. If I try to fire it, the ohm display will blink 10 times...

I just got an ohm meter from a local vape shop. It looks like one of them meters from coil master... The resistance meter works perfectly, but the voltage meter doesnt work. I screwed ny mod (Subzero Shorty) pushed the button but nothing happened. I tried to open the switch of my mod and pushed...

new to the vaping world and need to purchase a bunch of stuff to get me rolling First I need to decide on a charger. Have pretty much narrowed it down to either the nitecore i4 or the efest blu6. I like that the efest can charge 6 at once and let me choose at what rate to charge. Thoughts...

Anyone have a suggestion for a 510 ohmmeter that will read the low resistance of Ni and Ti coils? I'd like to screw my base to a 510 connector and build there. When done building, press a button and see what the resistance is. I'm looking for a prebuilt box, no soldering, wiring, etc. Thanks...

Is it alright to do that? Will it affect the reading?

Has anyone come across a DMM that reads ohms to the 100th? Thanks

Hello all i have a eleafohm meter i use it for my rebuildibles and ceck voltage on my mech. i have been using it now for 2 or 3 months and works fine. untill recently ive noticed something strange. it seems to only read to .04 ohms on ANY build i do. for an example i made a zippe coil took a...

So I have a ohm meter for my rda's and rta's, which reads from .1 to 9.9, which was decent for me (usually built between 1.1 and 1.6) but now I'm getting into TC and I need something that's a little more accurate and more suited for sub ohm builds. I've looked around a bit, but I'm not really...

I'm hoping I'm posting this in the correct forum. I purchased a USA ohm meter, the Ultimate...it will read both of my Atlantis coils, but will not read any builds on my three RDAs. I can read the builds on a VV mod, and I have tried adjusting the center pins from tightened up to all the way out...

I just tested a brand new USA Ohm Meter Ultimate on a 1.2 ohm KangerTech Subtank Mini. My multimeter is reading 1.1. The USA Ohm Meter Ultimate is reading .630 when screwed in all the way. If I back it out 1/2 of the way my reading is 1.06, If I back it out a full turn it's 1.63. What am I...

Been making coils and vaping without reading the ohms. Is that bad? Is an ohm meter necessary? My friend told me he doesn't use it but he still gets ginormous clouds.

So it's probably time for a new battery...but tell me what you think first... Yesterday I started noticing after a few puffs that I wasn't getting any vapor. I had a kanger evod clearomizer attached without the adapter (the guy who sold me my itaste vv and evod together didn't bother to tell me...

Just got an eleaf ohm meter. Took a coil top atomized I built that works and tested it. Its 32g micro coil I think 9 or 10 wraps on a 1/16 drill bit, cotton, and it tested at 3.9 ohms. That doesn't make sense. Put my variable voltage matrix-s battery on it and each setting hung out at 3.5 volts...

Just bought an ohm reader not too long ago, and whenever i build dual coil set ups it wont read anything in the sub ohm range. for example, i build on the reader and when i put in the first coil it reads fine; i get 1ohm readings 1.2 readings but when i put the second coil in it will read 654...

Where can you buy an accurate atomizer ohm meter?? Also where do you guys buy your batteries and chargers??

I wanted to share with everyone the ohm meter that I built, I find it very handy. I bought the Ohm Meter Kit from Mad Vapes. This is just like those black box ohm-meter's that a lot of you have, but this is the DIY kit that has only loose components. This kit requires you to solder...

Afternoon all, Bringing a little review to you of the Atomizer Ohm Meter from Toni over at www.ukecigcabin.com/ You can purchase this product here www.ukecigcabin.com/product/ohm-checker for £10.99 I received this free for review. So the Ohms meter. This is going to be a short review as not...