eVic-VT mini?
- Thread starter Daisychainvaper
- Start date
- th_trl_thread_readers 0
- Status
Thanks!
I will try it for sure.
If I can master the Origen, I'll have to put a TC build on the K.loud...
Only after I get some Ti wire of course, there is really not enough room in there for Ni200.
I will try it for sure.
If I can master the Origen, I'll have to put a TC build on the K.loud...
Only after I get some Ti wire of course, there is really not enough room in there for Ni200.
@TrollDragon
well i see something in common with the people having issues is NIckel
i mean seems like nickel might be the culprit,i cant bepostive on it.sicne i dont have nickel wires to play about.
i dd try and rebuild the original nickel head with nickel wire that came with it,and well had the same issue,i thought it was just a bad build.
have you tried ti?
well i see something in common with the people having issues is NIckel
i mean seems like nickel might be the culprit,i cant bepostive on it.sicne i dont have nickel wires to play about.
i dd try and rebuild the original nickel head with nickel wire that came with it,and well had the same issue,i thought it was just a bad build.
have you tried ti?
Not yet as there is no Ti available locally, I'll have to order some from Fasttech if theirs is any good.@TrollDragon
well i see something in common with the people having issues is NIckel
i mean seems like nickel might be the culprit,i cant bepostive on it.sicne i dont have nickel wires to play about.
i dd try and rebuild the original nickel head with nickel wire that came with it,and well had the same issue,i thought it was just a bad build.
have you tried ti?
The CLR heads GREATLY improve the tank though, it's like night and day for me. I also like that the CLR heads come prebuilt and in 5 packs. I just use them in wattage mode until the cotton goes bad, then build them with TI or SS
Probably will need a lawyer to sue, not a mod.
Mighty litigious of you. Bet you won't get much money out of that suit.
Here in Italy you can find original clr ti coils. My evic works fine in nickel mode but the titanium wire start to vape well at 230 c. I Lock the resistance at room temperature.
U can use it with this mod in wattage mode, but ss is not supported by this mod as temp controlled.
I have heard it can somewhat reduce dry hits if SS is used in the TI temp mode but you have to set your temp way lower than normal. I would set it at the lowest temp, try that, then adjust up as needed until you get a good vape
Last edited:
i think juice also plays a factor,and wicking
read somewhere that higher vg juices are great about 450f
(sorry a bit used to the f thing)
same thing with my titanium coils.
i get a decent vape on higher 500f or around 250c
@45-50 watts
Yeah just using the Kanger nickel OCC's.. I just bought a pack of 5 and I've been through 3 of them already, all suffering the same fate
I find the resistance reads high on them and they don't wick well enough for me. Great airflow though.
The evic mini kit is now available in all 3 colors at the EU warehouse (based in the UK) for £35! http://www.gearbest.com/starter-kits/pp_232173.html?wid=3
lol i've just found a way to turn the screen upside down
turn off the device and press + and - buttons at the same time for about 5 secs
i have no idea how this will be useful but it's funny
Last edited:
Sweet!
lol i've just found a way to turn the screen upside down
turn off the device and press + and - buttons at the same time for about 5 secs
i have no idea how this will be useful but it's funny
Excellent find, it will be easier to see TP kicking in.
lol i've just found a way to turn the screen upside down
turn off the device and press + and - buttons at the same time for about 5 secs
i have no idea how this will be useful but it's funny
Awesome! I like watching the realtime display while I vape, leaving it set like this.
Sent from my SAMSUNG-SM-N920A using Tapatalk
I like the upside down screen so I can easily read what's going on. Thanks for sharing.
I did find another negative. My shelf that I sit it on has all my Allen wrenches and screw drivers. Every time I pick the evic back up I have 1 or more of them stuck to it due to magnetic door. More funny than a complaint. Makes me laugh.
Sent from my iPhone using Tapatalk
I did find another negative. My shelf that I sit it on has all my Allen wrenches and screw drivers. Every time I pick the evic back up I have 1 or more of them stuck to it due to magnetic door. More funny than a complaint. Makes me laugh.
Sent from my iPhone using Tapatalk
- Status
Similar threads
