Official: Vaperfexion {VPX} Store Thread - High Quality Tanks and Vaping Gear

Discussion in 'Vaperfexion' started by cuseguy, Jun 10, 2012.

Thread Status:
Not open for further replies.
  1. cuseguy

    cuseguy Ultra Member ECF Veteran

    Hi everyone, I know many of you or at least, you might already know my products. In any case, it has been my pleasure being part of this community for the last 2 years and the time has come to open my own retail store. Vaperfexion
    It will take a little time to build up inventory and offer a wide selection of products. So for the time being, we will limit ourselves primarily to our own product lines and products that compliment that.
    Mainly all VPX Tanks and products and shortly we'll add the products necessary to complete a complete tank setup. So cartos, drip-tips, carto punches and lastly battery mods that compliment our tanks. We do have plans on producing our own mod later this year, but until then, we will offer the chinese VV variants. Maybe as early as next week.
    Opening my own store doesn't mean that my products will not be available in the stores that I have forged strong friendships and partnerships with. We will continue to provide new, exciting and original products to Nhaler, Cloud 9 and Happy Vaper and nothing will change with that. Having our store only adds more products that we can offer to them and to you. It also gives us the opportunity to release a few exclusive products and some things that might not otherwise get to you. So hopefully, you will stop by and visit the store and also stop in here to visit me to talk all things tanks and VPX products.
    Keep on Vaping.....CG
     
  2. cuseguy

    cuseguy Ultra Member ECF Veteran

    This tank was conceived as my own personal tank for my Provari almost 9 months ago. It was first seen in the Provari tanks thread around Christmas time and I received almost 150 messages about how to get one. It took awhile to even figure out how to build them in small quantities since the circular design details are very complex and time consuming from a production standpoint. So it will never be an item that sells in large numbers. But it is here now in limited numbers and there is no guarantee it will be made as an ongoing product. It may simply end up being a single Limited Edition run. There were 30 to start, there's now 11. Any that don't sell in the next 2-3 days will probably end up going to Canada, since many have asked and are frustrated since we don't ship there. But as of now, there's still time. Pro-V Cartomator SS - Vaperfexion
    proV1.jpg
     
  3. cuseguy

    cuseguy Ultra Member ECF Veteran

    Coming out very shortly is our version of the carto punch. We didn't rush into making it and the patience shows.
    We made sure we addressed every shortcoming that we found in punches and improved them.
    Just like tanks, they all look kinda the same, but performance is what matters. We started with a sharp, durable, easily sourced and easily replaceable piercing screw and really robust threading and made a nice solid aluminum 6061-T6 Billet housing with perfect milling to hold your 510 carto or atty perfectly snug during the actual "punch", This is really important since the carto can end up as a "burning" dud, if the carto moves around during the punch and the coil gets compressed. Finally we add a solid steel knurled knob for easy grip and leverage for all size hands.
    I had to make sure my wife could use it, so I had my wife sit and do 100 cartos for Cartomators!
    She said it was a piece of cake and I knew that we had it right. This is still the pre-production model, So finishes and trim may vary.
    It will be out around July 1st for $44.95 and unlike the others, we are making enough of them, so it will always be in stock and the replacement piercing screws will always be available also. Although we have now clocked 400 cartos on the original screw on this unit.
    rps20120609_213529.jpg
     
  4. 36tinybells

    36tinybells ECF Guru ECF Veteran

    Hello! I am currently using a saddle valve for punching- that punch looks nice!
     
  5. rummyforlife

    rummyforlife Super Member Verified Member ECF Veteran

    I am new to the vaping community but thought I would drop by and check this out!! :)
     
  6. Reddhott

    Reddhott ECF Guru Verified Member ECF Veteran

    stoppin in to give the thread some love and say hello!!!!!!!:)
     
  7. ISBN

    ISBN ECF Guru ECF Veteran

    Hi

    Happy days to you!!!
     
  8. luvinit

    luvinit Ultra Member Verified Member ECF Veteran

    Hi from a fellow northern NYer!

    Sent from my Kindle Fire using Tapatalk 2
     
  9. Karn

    Karn Vaping Master Verified Member ECF Veteran

    Cool tank, And Hiya
     
  10. ManuDawg

    ManuDawg Vape Proud Verified Member ECF Veteran

    Supporting member
    Dropping in to say hello!
     
  11. Sdh

    Sdh ECF Guru ECF Veteran

    A quick jaunt over here to say hello :)
     
  12. cuseguy

    cuseguy Ultra Member ECF Veteran

    Thank you all! A reminder to those that haven't entered the contest....2.5 hours left to enter in the Reactor Contest!
     
  13. macguy

    macguy Full Member Verified Member

    Hey! Your tanks and gear look totally awesome man, I've got to say there is a bunch of (other) stuff out there and most if it looks cheap / hastily made. Your tanks look really cool and well made and I will own one very soon one way or the other!
     
  14. Vchick

    Vchick PIF Moderator Verified Member ECF Veteran

    Congrats Cuse on your store, great news!
     
  15. Panky

    Panky Ultra Member Verified Member ECF Veteran

    Awww yeah :D
     
  16. vaptamist

    vaptamist Vaping Master Verified Member ECF Veteran

    Great news! Thanks Cuseguy!
     
  17. cuseguy

    cuseguy Ultra Member ECF Veteran

    Hey we were all new once, no shame in that at all. My advice is to enjoy and savor it! I would give anything to have that excitement of starting to vape, over again!
     
  18. cuseguy

    cuseguy Ultra Member ECF Veteran

    Thanks vap....! From the man who owns enough gear to start a high-end vaping store from his own home! you know I'm just kidding. Ok, I admit I am just a little jealous:blush:
     
  19. cuseguy

    cuseguy Ultra Member ECF Veteran

    Hey Panky....my long lost Darwin brutha!
     
  20. cuseguy

    cuseguy Ultra Member ECF Veteran

    Long time no see....kiddo! Any krisb sightings?
     
Thread Status:
Not open for further replies.

Share This Page