Pioneer4You IPV3 Li 165W / 200W With Temperature Control (Yihi SX330-V3SL )

[Maverik_X]

So yea P4U is releasing another super high wattage mod with temp control. Upgradable to 200 watts.
What is everyones thoughts of this new mod?
Links below.

https://aspenvalleyvapes.com/shop/v...er4you-ipv3-li-165w-with-temperature-control/
IPV3 Li Mod - Temperature Control Mod by Pioneer4You
Pioneer4You IPV3-LI 165W Box Mod Black Temperature Control
Pioneer4You IPV3-LI 165W Box Mod Silver Temperature Control

Authentic pioneer4you IPV3 Li 165W With Temperature Control

Pre-Order. Device Is Expected To Be In Stock Late May

The classic look of the original IPV3 with entirely redesigned internals. The P4Y IPV3 Li box mod is a 165 watt (upgradable to 200W) box mod with temperature control. This box mod uses a Yihi chip. One of the smaller changes that everyone will love with the P4Y IPV3 Li is the addition of a magnetic door, no more pulling out the screwdriver every time you need to replace those 18650s! Were you upset that the touch sense didn’t work on the first IPV3? Pioneer4You has included the touch sensor in this IPV3 model!

Temperature Control IPV3 Li Features:

• 165 Watts (Upgradable To 200 Watts)
• Original IPV3 Case
• Yihi SX330-V3SL Temperature Control Chip
• Dual 18650
• Enabled Touch Sensor
• Magnetic Battery Door
• Redesigned Internals

 

[Treeburner1983]

Expected to be in stock in late May? Judging by the ipv4 fiasco I doubt anyone will see the upgraded ipv3 until at least Christmas 2016.

-Treeburner

 

[sos2001]

Yea the touch sensor...............on second thought, no thank you.

 

[Maverik_X]

Yea the touch sensor...............on second thought, no thank you.

Not a fan of hot juice firing your mod? lol

 

[dionysuskiss]

Still waiting on my ipv4. 100watts is more then enough for me so....no.

 

[Maverik_X]

Still waiting on my ipv4. 100watts is more then enough for me so....no.

Gearbest preorder? they really dropped the ball on that. wake and vape just got some stock in fair price to.

 

[dionysuskiss]

No. abcvapes. They had the pre-order in black only. While I'm glad I stuck with the black(looks sweet), shame on me for trying to save $10

 

[dionysuskiss]

Annnd they pushed back the ipv4 black release date...again.

 

[Maverik_X]

Annnd they pushed back the ipv4 black release date...again.

This just happened today? smh

 

[whitewidows]

This just happened today? smh

I preordered from wake and vape and was in communication about their pending shipment. She had said that they ordered the black ipv4 but when they got them yesterday they were informed they people won't get them for a few months so I had her ship a grey one instead

 

[Maverik_X]

I preordered from wake and vape and was in communication about their pending shipment. She had said that they ordered the black ipv4 but when they got them yesterday they were informed they people won't get them for a few months so I had her ship a grey one instead

From what I have heard about the all black iPV4 is that it won't arrive till around the end of March sometime. Makes me wonder if this iPV3 LI will see our shores this month, I highly doubt it ,but hey you never know.

 

[TheBloke]

So the touch sensor lets you fire it a second way, instead of pressing fire? By the lightest touch on a sensor? What could possibly go wrong?

(Please tell me it at least knows the difference between a finger and something dead/inanimate? I guess it's heat activated, that's why you're talking about hot juice?)

Wow, Yihi and their gimmicks.. I'm surprised they haven't gone the whole way and allow you to fire it with the gravity sensor they love so much. "Shake, rattle and.. vape!"

Anyway I think I shall be sitting this one out. I do prefer the magnet door to the IPV4's jacket, which is comfortable to hold but also not secure enough - leaking juice can get under there really easily. But touch sensor is daft, and I really don't need 165W - let alone 200W.

And I'm guessing the SX330-V4SL is going to be identical to the IPV4 chip just with the extra fire power in non-TC. I'd be really surprised if it had extra TC power - though again, I can't imagine needing it. 60W is more than I usually use I'm pretty sure (I just got a 50W DNA 40 clone and I'm very rarely setting it at 50W.)

So the next Yihi mod I want will be the first magnet door, dual battery, 60W TC, without silly gimmicks and without (paying for) huge extra wattage.

I wish the Sigelei 75W would meet that criteria, but all the signs are it's using the same new chip as the Snow Wolf 200W, and it's basically just (another) DNA 40 clone. Or I should say, DNA-40-a-like, because it's not as exact a clone as the actual clones. But it still does everything the same way as the DNA 40, without (it seems at this stage) any Resistance Lock / Set Resistance.

 

[Maverik_X]

So the touch sensor lets you fire it a second way, instead of pressing fire? By the lightest touch on a sensor? What could possibly go wrong?

If its the same sensor that came with the iPV3 warm or hot juice will trigger it.

Hey there TheBloke
You ever a response from Asmodsus on the new Slow Wolf / Sigelei Tc chip specs & details?

 

[TheBloke]

Don't think so, no! I did get a different distributor asking me to contact him to find out, but I didn't get around to it.

 

[Maverik_X]

Don't think so, no! I did get a different distributor asking me to contact him to find out, but I didn't get around to it.

You should see what you can find out from them. Wouldn't hurt to ask them to send you some samples for review. put it through it's paces.

 

[Maverik_X]

Just to let everyone know ecigaretteempire has the silver iPV3 LI in stock and ready to ship for $89.95 out da door.
I asked about the black one and they said the black units won't arrive for a few more weeks, but they will include a 9 volt charge cable for the first 200 orders I think its a good deal for a 200 watt Temp Control/Limiting Mod.

Edit: Hopefully the touch sensor will work as intended this go around lol. We shall see when it arrives

 

[BrentMydland]

Ive already seen 2 companies with it in stock and shipping it immediately. One for 89 one for 99.

 

[BrentMydland]

I have an ipv2s and I love the touch sensor. Havent had it ever fire from stuff getting on the button. Not having a touch sensor is why I havent gotten an ipv3 yet. Definitely getting this when I have the money.

 

[Maverik_X]

I have an ipv2s and I love the touch sensor. Havent had it ever fire from stuff getting on the button. Not having a touch sensor is why I havent gotten an ipv3 yet. Definitely getting this when I have the money.

Have you ever had warm juice get on your touch sensor and cause it to fire?

 

[IXIShogunR1]

i love my IPV3 and was thinking about getting a IPV4 for them temp control
but im sooooo glad i waited now
gonna have to get me a black one of these now