[CLOSED]

[skillzizzo]

Thanks for the reply Tom. Can u throw up a pic of what the bottom fed marquis u have looks like we're it is bottom fed. I contacted avid vapor about making me a squonk center post for it they said they will for 20 bucks but the hole will be pretty close to to top of the juice well. Kinda defeats the purpose of it if the juice is not all going to drain back down into the the bottle. They said it needs to clear the 510 bolt that goes up to secure the center post. Curious if the one u guys have actually drain all the un used juice back down into the bottle I am assuming they do. Thank u. I think u want to bottom feed mine for me and make a delrin top cap for it with top air flow yup u should yup yup. Out of all the atty I have ever owned I love this thing I know u don't want to thow u allready said nope. U should Deffenitly be making attys my freind. Clone your self 5 times and u might have the time to do it

 

[ST Dog]

Condensation/juice flows to the 510 and allowed to pass through the threads and complete a circuit with the positive pin.

I doubt e-juice is conductive enough to short a mod.

I've had my tanks fill the 510 connector but never short anything.

 

[Tbev]

If someone is gonna bf a marquis for you for twenty bucks freakin hip hop on it! Ask chowder, I think he will concur. Who cares if it doesn't drain, it's got a huge well, you'll be fine, I'm sorry, I'm just too busy. I like the marquis a ton too, I'll make you a dt, it will be press fit, white Teflon out black delrin? It will replace the adapter and fit right into the cap, right, permanent.

Sent from my SM-G900V using Tapatalk

 

[skillzizzo]

If someone is gonna bf a marquis for you for twenty bucks freakin hip hop on it! Ask chowder, I think he will concur. Who cares if it doesn't drain, it's got a huge well, you'll be fine, I'm sorry, I'm just too busy. I like the marquis a ton too, I'll make you a dt, it will be press fit, white Teflon out black delrin? It will replace the adapter and fit right into the cap, right, permanent.

Sent from my SM-G900V using Tapatalk

I have the delrin top cap from avid vapor my freind is fat wide bore i like it. was being a smart a-- about making a delrin top cap as in the hole cap not the tip with top air flow my friend. probaully will just keep the marquis the way it is for now and use it as a juice taster. I use to use my veritas as a taster sold it once i got the marquis thow. The veritas does have better flavor is way more of a night mare to build on i did love that rda till the marquis then it just sat around. Im all for you making a sick bottom fed rda with a velocity style deck out of aluminum with a teflon cap and top air flow.

 

[skillzizzo]

Here u go Tom. John sent me these 2 teaser pics. Will be shipped out on its way tommorrow my freind

 

[Tbev]

Hellzyeah! The red liner is AWESOME!

Sent from my SM-G900V using Tapatalk

 

[Tbev]

By next week I hope to be freed up enough to deliver any order in less than thirty days. I should have all the outstanding sx mods shipped, and will be deciding on two mods to offer in small serialized batches. I have been beta testing two very different devices, that I just couldn't be happier with, they are so cool I feel bad withholding them this long however I needed to put them thru their paces and make upgrades everywhere I could. Depending upon your replies and my abilities, I will drop one than the next when the first is completed. I don't want anything to be a surprise, I want to be able to require a minimal deposit on each device. I also don't want anyone wishing they had ordered the later so I will make sure I am as transparent as possible, after all, I build what you guys want.

Sent from my SM-G900V using Tapatalk

 

[Doffy]

Hey tom. I'm new to parallel mods. My dually has been draining really uneven for about the last week. Assuming I just need to polish up contacts. I got it November I think and have been slack. Just thought I'd check any other common causes

Sent from my GT-I9506 using Tapatalk

 

[ST Dog]

Hey tom. I'm new to parallel mods. My dually has been draining really uneven for about the last week.

Battery mismatch?
Are they both the same?
Same age? Age/use can make the internal resistance different.

Suggest 2 brand new batteries that are always paired,

Even then, I had a camera that used 3 batts in series and one was always discharged more than the others. 3 brand new NiMH, charged on the same charger, yet one of them always discharged deeper.

 

[skillzizzo]

Hellzyeah! The red liner is AWESOME!

Sent from my SM-G900V using Tapatalk

Figured u would like it my freind. Even know u own them. The wait is so going to be worth it my freind I am eagerly waiting it's ariaval. Just a few more days. I am very interested to know what u have had in Bata for us my freind. I will be your Bata monkey any day my freind with the honest criticism that you need. Not that there is any thing to criticize when it comes to you but u know what I mean brother.

 

[Tagi]

I think I am one of those monkeys

 

[Doffy]

Battery mismatch?
Are they both the same?
Same age? Age/use can make the internal resistance different.

Suggest 2 brand new batteries that are always paired,

Even then, I had a camera that used 3 batts in series and one was always discharged more than the others. 3 brand new NiMH, charged on the same charger, yet one of them always discharged deeper.

running 2 pairs of lg hb6. they were new with the mod, just started being really uneven recently, hoping i haven't botched something

did contact maintenance today and will see how it goes

 

[Tbev]

Battery mismatch?
Are they both the same?
Same age? Age/use can make the internal resistance different.

Suggest 2 brand new batteries that are always paired,

Even then, I had a camera that used 3 batts in series and one was always discharged more than the others. 3 brand new NiMH, charged on the same charger, yet one of them always discharged deeper.

I'll get you taken care of, it's no problem. I'll shoot you a pm.

Sent from my SM-G900V using Tapatalk

 

[TheDigital99]

I would be interested in the resolution also as I have noticed an uneven discharge.. I just rotated battery position halfway through

 

[Tbev]

Hey tom. I'm new to parallel mods. My dually has been draining really uneven for about the last week. Assuming I just need to polish up contacts. I got it November I think and have been slack. Just thought I'd check any other common causes

Sent from my GT-I9506 using Tapatalk

Choosing it's the biggest reason, you'll always have a bit of inconsistencies because the first cell to fire, fired a millisecond before the second, and when you release it's a millisecond late so its firing for day, two millisecond longer every hit. That being said, if one is fully charged and one is dead, your contact is really dirty our needs to be adjusted, it's no big deal, it happens every once in a while. Check your voltages, note the front or back cell that's the problem, after you run a cycle thru it, after its clean haha, and shoot me a pm, I'll get you fixed up, no problem. I'm sorry for the hassle.

Sent from my SM-G900V using Tapatalk

 

[Tbev]

I think I am one of those monkeys

I'd say so. Gonna be cool tho.!

Sent from my SM-G900V using Tapatalk

 

[hildicat]

Hey Tom do you make a dually with the magnetic cap? Also interested in what the firing mechanism looks like.

 

[Tbev]

A lot of people want a dually with a magnetic cap, if you want one like this post or start a list. If I get enough interest I will build it, it will cost the same as a original dually, but if you have an original dually and wanted a magnetic cap I eas not doing it at the time, shoot me an email and I'll give you a crazy deal on a new one. I don't share, and I ask people not to share pictures of the internals of my mods online. If you shoot me an email I'll be happy to answer any questions, you'll like it, but I appreciate keeping pics, especially of the mods that haven't been copied yet offline.

That being said, I'm all for the seamless dually, I figured it out, I can do it, I just need the desire! Let me know.

Sent from my SM-G900V using Tapatalk

 

[Tbev]

I also just landed a few new Cerakote colors, Bright Purple, which is the darkest, deep purple and I will try out mixing it to be darker and bolder, I spoke with the cerakote tech about making and mixing the Purple and Sig Pink, the new pink I also received, pop a little more. Battleship Grey also landed, should look great and more bright white, along with the rest of the colors, think I'm over 20 colors now.

 

[skillzizzo]

A lot of people want a dually with a magnetic cap, if you want one like this post or start a list. If I get enough interest I will build it, it will cost the same as a original dually, but if you have an original dually and wanted a magnetic cap I eas not doing it at the time, shoot me an email and I'll give you a crazy deal on a new one. I don't share, and I ask people not to share pictures of the internals of my mods online. If you shoot me an email I'll be happy to answer any questions, you'll like it, but I appreciate keeping pics, especially of the mods that haven't been copied yet offline.

That being said, I'm all for the seamless dually, I figured it out, I can do it, I just need the desire! Let me know.

Sent from my SM-G900V using Tapatalk

U know I want one brother allways have. What's a crazy deal my freind stupide crap economy got me laid off today. Good time for me to start that apprenticeship program at your shop brother. Could use some sun cold and snowy this way yuck