What is the best Mech Mod

Discussion in 'New Members Forum' started by Muzzy, Jul 28, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Muzzy

    Muzzy Full Member

    Joined:
    Jul 25, 2013
    Location:
    Malaysia
    Hi all i just started vaping recently, currently I'm using kecig k100 mod, since it is cheap at my place. I need to check with u guys what is the range of best mech mod through out your xperience vaping. Please advice.
     
  2. artt

    artt Ultra Member Verified Member ECF Veteran

    Joined:
    Jan 14, 2011
    Location:
    michigan
    There are so many high end mods to choose from and frankly my line-up is very limited. Having said that, I own 3 apv's from Super t and very pleased with all. The P-18 and P-10 have been used for over two years and "hit" well, always fire, and come with a lifetime guarantee.
     
  3. ceed0t

    ceed0t Full Member

    Joined:
    Feb 25, 2013
    Location:
    New Jersey
    The "best" mech mod is very subjective. Are you looking for something with the best looks? The lowest voltage drop? Best durability? Please be more specific.
     
  4. Vedra

    Vedra Senior Member Verified Member ECF Veteran

    Joined:
    Aug 6, 2011
    Location:
    California
    To be honest, the k100 is a solid piece of kit. There are many other expensive mods out there with serial numbers and pretty logos, but that's about all the difference, really. People can argue about minuscule amounts of voltage drop, but mechanically speaking, performance doesn't get a whole lot better than a k100 with sanded contacts.
    As far as the best, that's a very subjective question because what one person sees as a positive attribute, another may dislike. I am partial to Solid tubes. Some folks don't like them because they dont telescope.
    The best advice I can give you is the same advice I give about ar15 lower receivers: find one with a roll mark that you like from a reputable company, and call it a day.
     
  5. rogergendron1

    rogergendron1 Super Member ECF Veteran

    Joined:
    Apr 3, 2013
    Location:
    woburn ma
    For under 100$ the smokteck magneto

    It is a nzonic clone with a real working magnetic switch

    Its like 50$ and its all stainless steel with a 510 flat top
     
  6. Glen Snyder

    Glen Snyder Ultra Member Verified Member ECF Veteran

    Joined:
    May 23, 2013
    Location:
    Cape Coral, Florida, United States
  7. cyclotron

    cyclotron Super Member Verified Member ECF Veteran

    Joined:
    Sep 24, 2012
    Location:
    Hampton Roads, VA, US
    I have a Smok Magneto and it is wonderful for the price. I should have a Super-T ELA one of these days but I'm sure the wait will be worth it. Another post here hit the nail on the head too. You sorta need to know what you want out of a mech before you start shopping.
    Do you want a flat top, what diameter, does it matter what size batteries they take, would you prefer a bottom side switch, top side switch, bottom switch, telescopic, etc, etc?
     
  8. Bill's Magic Vapor

    Bill's Magic Vapor Juice Maker Verified Member ECF Veteran

    Joined:
    Feb 8, 2013
    Location:
    USA
    Perhaps impossible to answer without more specifics. Best in what way? Best in what price range? Best Clone? Best finish? Many of the clones are almost identical to the originals and can cost from 20% to 50% of the originals. I would lean toward the Electric Angel and the ELA on the top end, the Magneto looks awesome in the mid range, just got the Caravela clone and really like it too, but there are about a dozen other mods I'd like to get my hands on to check out personally. Anyway, some food for thought. Great suggestions previously.
     
  9. eratikmind

    eratikmind Retired & Squonking It Verified Member ECF Veteran

    Supporting member
    Joined:
    Mar 22, 2013
    Location:
    Las Vegas/San Francisco
    Super T ELA, Nemesis, GP PAPS 2.5, Chi You are the mechs, which I have settled for, thus far.

    Your query is quite subjective, as taste and means vary.

    - Andy
     
  10. ThermoNuker

    ThermoNuker Senior Member Verified Member ECF Veteran

    Joined:
    Jul 3, 2013
    Location:
    Ascalon, Tyria
    Since it's telescoping, you might want to check Vaportek USA. It sells the nzonic 510 "flag" connector top for Segelei tubes for $6. It might just fit the magneto.
     
  11. Steam Turbine

    Steam Turbine Ultra Member ECF Veteran

    Joined:
    May 3, 2013
    Location:
    Montreal Quebec Canada
    The best mechanical mod is the HydroSuperC by CERN, It is a low pressure, hight temperature metallic hydrogen superconductive device.

    A true zero voltage drop device. It should come out soon... in about 100 years or so.
     
  12. eHuman

    eHuman Ultra Member Verified Member ECF Veteran

    Joined:
    Jul 18, 2010
    Location:
    San Diego
    I hope that you are pleased with the K100 performance, you won't get much better without spending a lot more. The real question is, are YOU satisfied with it. and are you getting the most out of it that you can?
     
  13. Renzuli

    Renzuli Ultra Member Verified Member ECF Veteran

    Joined:
    Jun 27, 2011
    Location:
    North Las Vegas
    No it won't fit . Not even close . The top you speak of has threads on the outside . The Magneto threads are inside a cap . And besides the Magneto already has a design on their cap . A replacement is not needed .
     
  14. ChaplainSD

    ChaplainSD New Member

    Joined:
    Jun 28, 2013
    Location:
    San Diego, CA, USA
    The best mod is one that is easy for you to use, doesn't misfire and fits your budget. I've tried the low end stuff, high end stuff and clones. Some are great out of the box/bag, while others have to require a little tinkering. It's all a matter of preference. It's just like cars, it can be a total POS or a Mercedes S class, either way they're going to get you from point A to point B. I'm finding myself focusing more on my atomizer builds and the kinds of juices I like. You don't have to drop hundreds to have a good vape from a mech.
     
  15. nickrw99

    nickrw99 Senior Member Verified Member ECF Veteran

    Joined:
    Sep 21, 2011
    Location:
    Los Angeles, CA
    Take a look at the mech mods from the Philippines ("pinoy mods"), I don't think they are being talked about enough.
     
  16. MatthewR1989

    MatthewR1989 Full Member

    Joined:
    Jul 29, 2013
    Location:
    United States
    i've had a k100 for a few days, i love it and from what i hear it really can't be beat for the money...it's also my first mech. I would love to have a magneto as someone else suggested
     
  17. ThermoNuker

    ThermoNuker Senior Member Verified Member ECF Veteran

    Joined:
    Jul 3, 2013
    Location:
    Ascalon, Tyria

    Oh well... thanks for the info. I was hoping it would b/c, I've heard, the center pin is not adjustable. It could pose a problem to some.
     
  18. Rat2chat2

    Rat2chat2 ECF Guru Verified Member ECF Veteran

    Joined:
    Apr 16, 2013
    Location:
    Reoville
    I've never heard of that one before and even though I don't know a lot about them yet..... I know when one looks nice.:vapor:
     
  19. trina

    trina New Member

    Joined:
    May 2, 2013
    Location:
    54983
    you cant go wrong with anything that comes from super t
     
  20. tj99959

    tj99959 ECF Guru ECF Veteran

    Joined:
    Aug 13, 2011
    Location:
    utah
: super t, nemesis
Thread Status:
Not open for further replies.

Share This Page