Media

Add media…
20130729 203741

20130729 203741

View
Polished Nemisis

Polished Nemisis

View
vaping

vaping

View
richmanRBA 2T

richmanRBA 2T

View
hornet tank 3

hornet tank 3

View
hornet tank 2

hornet tank 2

View
hornet tank

hornet tank

View
psb

psb

View
Upside down, showing the 510 connection and the eliqued fill screw. Remove the screw and use a needle nose bottle or Ucan. Like the Kayfun 3.0, and does not require the plastic fill needle as does the Kayfun 3.1.

Upside down, showing the 510 connection and the eliqued fill screw. Remove the screw and use a needle nose bottle or Ucan. Like the Kayfun 3.0, and does not require the plastic fill needle as does the Kayfun 3.1.

View
The is the finished Kayfun. Chose all metal this day, on my second 2.0 Ohm coil build, as I was having a bit of leaking with the clear tank tube. The metal has not leaked. What a tank! Sitting atop the Siam Mods Tank Holder.

The is the finished Kayfun. Chose all metal this day, on my second 2.0 Ohm coil build, as I was having a bit of leaking with the clear tank tube. The metal has not leaked. What a tank! Sitting atop the Siam Mods Tank Holder.

View
Threw the Kayfun on the Kir Fanis eVic to hopefully show the 2 Ohm resistance, using 7 Watts. Great first build and vapes nice. Without air control like it's big brother the 3.1, I found the draw a little too airy and wish I had bought the Russian 91% which is identical but has the air flow control and half the cost. Marvelous piece of engineering and great vape.

Threw the Kayfun on the Kir Fanis eVic to hopefully show the 2 Ohm resistance, using 7 Watts. Great first build and vapes nice. Without air control like it's big brother the 3.1, I found the draw a little too airy and wish I had bought the Russian 91% which is identical but has the air flow control and half the cost. Marvelous piece of engineering and great vape.

View
Checking the coil on the Ohm Meter. Shows 1.6 Ohms exactly. I wanted a 2.0 Ohm coil, and rebuilt the coil using a 3/4 wrap and got exactly 2.0 Ohms.

Checking the coil on the Ohm Meter. Shows 1.6 Ohms exactly. I wanted a 2.0 Ohm coil, and rebuilt the coil using a 3/4 wrap and got exactly 2.0 Ohms.

View
The remaining tubes are added, this day all metal, and then the top and mouth piece (drip tip) are added. The Kayfun is ready for juice now.

The remaining tubes are added, this day all metal, and then the top and mouth piece (drip tip) are added. The Kayfun is ready for juice now.

View
the top of the chimney is added, as is the first tank ring.

the top of the chimney is added, as is the first tank ring.

View
At this point, I added some eliquid. It allowed me to push the wicks down into the chimney tube, but not "stuffed," which could block juice flow. Also, remember to keep the coil above the air flow chamber.

At this point, I added some eliquid. It allowed me to push the wicks down into the chimney tube, but not "stuffed," which could block juice flow. Also, remember to keep the coil above the air flow chamber.

View
The wicks are then trimmed.

The wicks are then trimmed.

View
The long ekowool 3mm wicks fed up the chimney.

The long ekowool 3mm wicks fed up the chimney.

View
First coil. This is a 3/2 wrap with 32 Kanthal. The base sits in a Siam Mods base holder. Notice the wick sits above the airhole. The leads are easily connected with the two screws.

First coil. This is a 3/2 wrap with 32 Kanthal. The base sits in a Siam Mods base holder. Notice the wick sits above the airhole. The leads are easily connected with the two screws.

View
images

images

View
IMG 20130821 234003 422

IMG 20130821 234003 422

View
2013 08 21 14.52.01

2013 08 21 14.52.01

View
17325 621548854526179 1191277936 n

17325 621548854526179 1191277936 n

View
69 brass top cap

69 brass top cap

View
69 bottom

69 bottom

View
Top Bottom
Add media…
Add media…
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu