Search results
-
AFS v2
So the filler is used to "wick" the excess juice up, so it doesn't leak out the air holes. I get that, but one question, once the juice is inside the overflow area, how do you get it out? You can empty your juice out, take the AFS apart and clean it out, but that's a PITA! How do you get the... -
Next batch of SB 1.1 bottoms?
Will there be another batch of these made? I have a dbsb top, and I'd love to have a bottom, so I can have two working units..... I read in another thread that there will be a v2.0 bullet as well. Will this be compatible with the v1.1 top/bottom? Link to the other thread: sb v1.1 bottom -
Low Resistance 510/801/901 Atomizers
I did read somewhere that these atties do not last as long. I've ordered from nhalor, and other sites. I seemed to have gotten two kinds of low resistance 510s. The first batch I got burned really hot, and leaked pretty easily. The second batch doesn't burn as hot and don't leak as much. I... -
The Silver Bullet Abuse Thread
I use the really thin cut down tennis grip on mine, it works perfectly. I took it off today cause it's getting a little stretched out, (time to replace it after a couple months) and my sb looks BRAND NEW. Not a scratch on it. I've taken it on the paintball field, and I wear it in a pouch on... -
SB and V4L Cartomizers...
I've used my SB with V4L, healthcabin, litecig, and nhaler cartomizers with success . My adapters are from altsmoke and nhaler I believe. (My family has five 510>808 adapters) ***I have not tried the PREMIUM cartos yet, but I did just receive some blanks from litecig.......*** -
Drip Tips
The tips are machined out of delrin. I've had experience with delrin from playing paintball for over 15 years. It's lightweight, strong, and approved for food use. It's a pretty neat material, the only problem is if it cracks, it can't be glued back together due to it's... -
Vaping at 6v - any known issues?
I primarily use two vaping options, a 510 (reg or magnum) and cartos. I will mention that a carto can get burnt real quick if you're not careful. 6v does use juice quicker. I actually use nhaler's high volt juice in empty or blank cartos and cap them with cut down 901 tips. I top these... -
What type of MicroFiber cloths i use for my SB to Shine
I actually use a fine micro fiber to remove the oil from my hands off the SB before I put my tennis grip on the SB. (I find it grips better without the oil from my hands trapped under it!) I have about 6 computer screens, mulitple tv's, motorcycle helmets, and paintball googles. I use micro... -
Gamer Mod (Super Bright Light!)
I actually have modded a few xbox 360 controllers for myself and friends. I install rapid fire chips, install ps3 thumbsticks into xbox controllers, change leds, ect. The leds in xbox controllers are 0603 SMD's or surface mount leds, which I believe are the same size as the ones on the v4l...- FreeGT
- Post #10
- Forum: Vapor4Life
-
Y adapter for DBSB w/ ADJUSTABLE DRAW!
Unfortunatly I havn't had much time to tinker in my garage, so the y-pipe is still the same... I never mentioned this, but the "draw control" actually pulls air in after the atomizer. The air flowing through the air valve doesn't actually pass through the atomizer. I haven't had any issues... -
Y adapter for DBSB w/ ADJUSTABLE DRAW!
I bought mine at a mom and pop fish store. I have 3 tanks setup at the moment, a 20, 55, and 125 gallon. I only trust someone who knows fish, (no walmart fish for me!) I honestly don't know where I got the valves from. I've been to probably 15 different pet shops for fish/supplies over the... -
Y adapter for DBSB w/ ADJUSTABLE DRAW!
I guess you can call it the holley 750 double pumper of vaping, but then again that's not really necessity ...... I took the hot glue off the cart caps. Just the grommets are holding the barbs in. I had to trim one side of each of the grommets to get them to fit snug. I still would like to... -
Y adapter for DBSB w/ ADJUSTABLE DRAW!
I am running two cr123a's at 6v. Here's how it goes.. I got my SB in, and the battery was not charged. I couldn't wait so I grabbed my dad's cr123a's out of his xhaler........bad mistake. I can never go back to 3.7v again..........or so I thought. I just tried it on 3.7v, and damn it works... -
Y adapter for DBSB w/ ADJUSTABLE DRAW!
I never use carts. I only drip (or use a cartomizer). I've tried cart mods, but they just don't last or perform much better then dripping. I will say I would love to get a cart mod to work on an 801, those carts are massive! That being said you still could use the filler if you wanted. I... -
Y adapter for DBSB w/ ADJUSTABLE DRAW!
After the first hit on the DBSB I knew I needed a different mouth piece, or mod one. I saw some other members on the forum talk about it, so I know I'm not alone. I had a couple ideas, but aside from actually machining one out of nylon or something, this was the smallest method to me. Shot... -
I got some socks for my SB
It happens sooner or later. Just like riding a motorcycle, EVERY one will drop a bike in their life. I swear I never forgot to put my kickstand down! (thank god for crash cages!) Look at it optimistically, now you don't have to baby it 24/7! -
I got some socks for my SB
How tall is the cannon? The tennis grip is 7 1/2 inches long..... Maybe some long uncut heat shrink tubing. . I know they make thin tubing up to 2 inches. I know they have clear and matte black for sure. Aside from that, I don't really know. Maybe baby panty hose? -
I got some socks for my SB
Well that makes me feel pretty good that I'm thinking on the same lines of True love! -
Brainstorming Thread - Give your Ideas!
A spring break contest would make me spring broke! I would like an unlabeled new or existing flavor in with my freebies. If you guess it right your entered in a lottery or something. I would also like to see a March madness tournament with the most sold flavors. The winning flavor gets a...- FreeGT
- Post #29
- Forum: Vapor4Life