Search results

  1. skelley

    Kanger T2 Leak - How?

    NP, let us know what you find.
  2. skelley

    OMG How did this happen?

    The top of the metal ring is grooved so that the tube can set inside it. The only thing holding the 2 together is glue. I dropped one of mine and landed at a angle on the tip and came off. I scraped off what little glue was left and snapped it back on but haven't glued it yet.
  3. skelley

    Stop raving about the ViVi Nova's (and Minis!!!!)

    They are nicely built, but they wick like the v1 stardust. They wick the thinner parts of the juice first and leave the heavier particulates for the end. The end vape has little to zero flavor and it taste awful. This is evident, but I guess that I am the only one that either notices it or...
  4. skelley

    Kanger T2 Leak - How?

    The center pin is wired to the top coil. If it spins the wire could be broken. The wife had one break on her and it was the batteries fault. The battery post had a lot of grooves cut into the post from a lot of use and those grooves were catching the bottom pin and slowly turning it which lead...
  5. skelley

    Anyone try the new Kanger T3 yet?

    GIMike, I know what a ego-w is. I almost ordered them, but that was about the time when I was tired of top coils. I was told that the originals have a clear tube and the knock-offs are frosted. My wife isn't a happy camper at the moment. She somehow lost her seal above the wicks. Don't ask...
  6. skelley

    CE3's,stardusts,cartomizers

    Welcome to VaporAlley - Your home for the best electronic cigarettes, e-cig supplies and American Made e juice.
  7. skelley

    Anyone try the new Kanger T3 yet?

    No problem, let us know how it goes and if you notice anything about these as you use them. I'm all ears and I value your opinions as well. :thumb:
  8. skelley

    Anyone try the new Kanger T3 yet?

    I'm flattered and thank you. :oops: I do love a good bottom coil :2cool: I would try cleaning one with out taking it apart first. A good hot tap water rinse and dry should help a lot. This seems to help get anything in and/or on the wicks off and they seem to start wicking and producing better...
  9. skelley

    Anyone try the new Kanger T3 yet?

    fatcharlie, I noticed a slightly more TH w/ my juices as well and it seemed to return to normal after cleaning.
  10. skelley

    iTaste VV by Innokin !!

    iTaste MVP.....link
  11. skelley

    Just ordered a "Young June"

    I believe Joe of iVape stated that the YJ have a 1 in 5 return rate.
  12. skelley

    Move over ego twist, make way for the Super Ego VV!

    I wanted to get the wife a new batt and after weeks of debating, the super ego VV was the one that I chose. It had everything that I wanted for her and she's a happy camper. she has been using her KGO charger so it fell right in line with her charging habits.
  13. skelley

    Anyone try the new Kanger T3 yet?

    I dry burn these just like my CE3's. The center post is a lot tighter, but I rock it to remove. Remove the 2 loose flavor strands; clean & dry burn as the coil is exposed for easy viewing; Reinstall the loose strands and the center post. Fluff the wicks and push the silicone seal down just shy...
  14. skelley

    Anyone try the new Kanger T3 yet?

    Same here tx. The wife has not modified hers, so it's still in 'out of box' running mode and no leaks in 2 days. I have been playing with mine and when I removed the 2 flavor wicks I had a lot of gurgling so I figured it would leak like that. I reinstalled 1 of the wicks, this is where I like...
  15. skelley

    Anyone try the new Kanger T3 yet?

    I thought the same thing to tx, I wanted to immediately order more, but couldn't justify it atm. I just got another shipment of many T2's w/ another pack of heads that I didn't need and 2 mini novas w/ several extra heads. I probably have around 200 devices for the zombie apocalypse, but I will...
  16. skelley

    CE3 Elite Cartomizer Help PLEASE !

    Those CE3's are manufactured by BetterLifeTech and are sold on many sites. I have used them since 4/1/12 and I really like them. I can make small adjustments to them and get them to really crank. They are a must clean prior to use in my opinion then I like to rock the tube, which will raise the...
  17. skelley

    First time with clearomizer, taste BADLY burnt!!

    I'm not sure what type of clearo you are using, but I do this to all my clearos.....link. There is some good info in that thread and many others in the clearo section that address many known issues with different type of clearos.
  18. skelley

    Kanger T2 wick set up - Any one play with these? Getting burnt taste over 3.5v

    I don't use flame anymore on my wicks. They seemed to get stiff and brittle. Once the strands are brittle, they seem to break at bends and this defeats the purpose and longevity of them for me. What does work for me is either microwaving water and letting them soak, then rinse in tap water and...
  19. skelley

    Anyone try the new Kanger T3 yet?

    They have ego cone threading. Yes the threads are on the inside of the skirt. Edit: Most of our batts have 510/ego threads. On my 510 box mod, I use a ego adapter. I would recommend the sealed adapter from provape...link. They cost more than the cheap china adapters, but once you see/feel and...
  20. skelley

    how important is the display?

    I just got the wife a super ego VV. She's still new to VV so I opted for a device with a screen. Shes learning quick as she said 'I like this many volts on this device, but this many volts on the other device." I told her she's doing good and just go by taste. Her new toy is the puff counter...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu