Search results
-
"clearomizer" round up for 808s...
Should work well on the volt. I see they have cones made for the fluxos too. Missed the boat on that one. I imagine 10 fluxos are going to last me a very long time. Hopefully the posts are stronger on these. -
The Echo Thread
Nope. It's from that original batch she had that were funny. It holds it's charge better now and the unresponsive draw it had that would develop the moment it dropped to 3.7v is gone. I still don't let it drain much beyond that but with the 10 second cutoff I can still use it even as it get's...- Charlz
- Post #3,243
- Forum: eGo Type Models
-
New Super Concentrated Flavors
it's funny how things we dislike in real life, we like in our juice. I really don't like black licorice anything but it's becoming one of my most useful flavor profiles and one of the things I am quick to pick up on in a lot of flavorings. It would be nice to play with the flavor on it's own...- Charlz
- Post #2,243
- Forum: DIY E-Liquid
-
"clearomizer" round up for 808s...
I just ordered two batches of the xls and five ce4 shells so I'm good. I have to be good. Between my massive order of DIY stuff and that, I should lay low for awhile. Maybe I'll experiment and get a pipe cutter. I can cut down the center post of a ce2 or perhaps make my own thread cover and... -
The Echo Thread
I just wanted to say that I have the Stealth from Victoria fully in rotation now. It has been having zero issues. Maybe it just needed to be broken in. I don't know. I'm glad I lost if for awhile and didn't send it back.- Charlz
- Post #3,241
- Forum: eGo Type Models
-
The Echo Thread
I detach for the rebuild. The less stress I can put on the tube the better. It sucks having to wait two days for the silicone to cure fully but it's easier to get the coil just right without the tube on. I got tired of playing operation as you put it and then having to get under the tube to...- Charlz
- Post #3,240
- Forum: eGo Type Models
-
"clearomizer" round up for 808s...
seems like it would let in too much juice. You talking about when they have been replaced with fatter wick or just being careful not to set it down horizontally? It's a moot point for me too as most of them house ce2s but I still have some for my kgo and volt battery that don't fit the ce2 guts... -
The Echo Thread
I started a thread once that asked what odd tools folks have that became assimilated into vaping. It never went anywhere but hemostat did come up.- Charlz
- Post #3,238
- Forum: eGo Type Models
-
"clearomizer" round up for 808s...
That was one of the first mods I came up with. It is attempt to suck the vapor through that cone that causes the congestion. There are other things that work better like the soft tip of a kr8 carto. But there's a lot if space between the plug and mouth so it becomes a situation of take a toot... -
The Echo Thread
Taking them apart for cleaning and rebuilding has been something I've been meaning to start a thread about for awhile. I don't have the ability to video tape but I may be able to take pictures of the process. It's very easy.- Charlz
- Post #3,236
- Forum: eGo Type Models
-
The Echo Thread
then you are good! there is a piece of silicone under the coil. If you pushed too far with the philips head, you may have pushed the coil down so it contacts it. You can see there's quite a bit of room though between the top of the post and the coil. After you dry burn the coil and wick...- Charlz
- Post #3,229
- Forum: eGo Type Models
-
The Echo Thread
then you are good! there is a piece of silicone under the coil. If you pushed too far with the philips head, you may have pushed the coil down so it contacts it. You can see there's quite a bit of room though between the top of the post and the coil. After you dry burn the coil and wick clean...- Charlz
- Post #3,228
- Forum: eGo Type Models
-
The Echo Thread
The metal stem stays put. What I'm picturing in my head is the rubber piece is out and you have a metal "stem" or post with slots with wicks sticking out either side. If you look down into the turbo, can you see the coil?- Charlz
- Post #3,226
- Forum: eGo Type Models
-
"clearomizer" round up for 808s...
gotta love that Highbrow. Their exotic blend and french pipe spell a quick death for my echomizers but I can't help putting them in there. The two just work so well blended together. Thank the vaping gods for clearos and the ability to dry burn. -
"clearomizer" round up for 808s...
These ce4+ just don't work right with autos. By the second to third pull there is an odd congested draw. The volt or the cone skirted ones seem to be the worst ones. I don't get quite a congested draw with the flat connection of the echo versions but these seem better suited for manual... -
The eGo/Echo Kuwako Thread
My Janty logo fell off and I glued it back on. Now part of it has broken again and it looks just like a crescent moon. Looks neat!- Charlz
- Post #202
- Forum: eGo Type Models
-
The eGo/Echo Kuwako Thread
Mtn Vapor has them too and the iTurbo kit but i'd start with the regular echo cartos before moving to the clearomizer stuff. The iTurbo is the 808 version of the Vision Stardust- Charlz
- Post #201
- Forum: eGo Type Models
-
"clearomizer" round up for 808s...
I don't have any cinnamon but I do have a lemon lime flavor that rarely gets visited but I love it when I do. I'm going to pop some in a stardust and vape the whole thing on my kgo. Maybe the mix of citrus and higher voltage is doing something to crack these. -
The Echo Thread
You'll know. You fill it up and it starts dripping way too soon or it's giving you dry flavorless hits and you take it apart to find the filler still has lots of juice in it and the wicks are new or freshly cleaned. It's been done. I asked before. Since ego is branded in the minds of those...- Charlz
- Post #3,223
- Forum: eGo Type Models
-
"clearomizer" round up for 808s...
the very first Vision I bought from Litecigusa developed a crack when I tried jamming back on the silver ring at the base. That's the only one.