Search results

  1. BJ43

    Just hemp

    IMO the vertical coil is only an advantage if you are drawing all your air thru the coil. I see many just sticking a vertical in cotton or hemp in drippers and other rbas with side air holes. Can't really see any advantage over horizontal. My quest for flavor, was always to reduce the air...
  2. BJ43

    Just hemp

    Take the 12 strand and break it down. Break apart the individual strands down to fiber. Wrap this fiber tight around the vertical coil, then pack the cavity with more. No degumming needed.:)
  3. BJ43

    Just hemp

    I have gone to larger diameter vertical, 1.8 to 2mm coils. This eliminates the tight draw and clogging after a few days.. I use hemp fiber and pack it tight around the coil and the coil is pressed down tight on the base. The balance of the hemp fiber is packed firm to fill the whole cavity...
  4. BJ43

    Just hemp

    Let it soak up juice for about an hour. it takes hemp a while to swell and really start wicking. When it does it is 4 times faster than cotton. I have four foggers and four Russians with 1.3 to 1.5 ohm vertical R41 coils. I chain vape at 14 to 18 watts and hemp is the only wick that has kept up...
  5. BJ43

    Battery Internal Resistance Measurements

    :DBaps is reading the resistance between his fingers???????:confused::D
  6. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Thanks mamu, I ordered these, will they work or should I reorder? BZX85B5V6-TAP Vishay Semiconductors | Mouser
  7. BJ43

    The "WeekEnder"

    Why didn't I think of that. Two big holes instead of a bunch of small ones. Thanks Mike.:)
  8. BJ43

    The "WeekEnder"

    Waiting for my Raptor parts for my weekender. Cutting window, PITA, glad I have Baps frame to cover my slips.:D
  9. BJ43

    The "WeekEnder"

    Got this from FT, now we know why Sweden: It is a good news that your order was shipped, but because knives and power banks are not allowed to be shipped via USSGP (USPS goes through Singapore Post), we have changed the shipping method of your order to Sweden Post. We are sorry for any...
  10. BJ43

    Bonuts (?) for bridgeless 510 atomizers

    Yes the Bonuts work great on bridgeless, just be careful the bonut does not short the coil. Standard 1/2" SS pipe screens rolled and bent into a round shape. http://www.e-cigarette-forum.com/forum/atomizer-mods/221377-stainless-steel-doughnuts-dripping.html#post9820811
  11. BJ43

    The "WeekEnder"

    Add jam nut to coop list.....:D
  12. BJ43

    The "WeekEnder"

    Yep, could be a great alternative for the DNA 30..:)
  13. BJ43

    The "WeekEnder"

    I don,t understand my signature count, but I have reached 5 year without smoking....:vapor:
  14. BJ43

    The "WeekEnder"

    And a pretty compact 8400 mAh....;) Sometimes hard to find shorty singles in hi mAh.
  15. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    I also ordered all the parts except the box. Have a a big box full of boxes.;) Thanks Mamu. One question, specs on the zener diode besides just 5.6v?
  16. BJ43

    The "WeekEnder"

    Yep, that and my daughter is here visiting, she controls me more than her mother....;)
  17. BJ43

    The "WeekEnder"

    In the last week I have been using the Groove boards at 15 watts, it is strange but the original 3800 mAh flat lipos outlast the two round NCR 18650PF that would be 5800 mAh..:confused: Mamu recommends switching the batteries at half cycle to keep them balanced on the Raptor 20 A, I have never...
  18. BJ43

    The "WeekEnder"

    Ordered all the parts from Mouser for my 20 amp weekender in Mike's alum box. Going to use this lipo pack and mount the balancing plug off the side so I can use one of my RC chargers with an extension. Glad to see Mamu back and her precise instructions.:) Turnigy nano-tech A-SPEC 4200mah 2S...
  19. BJ43

    The "WeekEnder"

    My laugh: A senior citizen drove his brand new Corvette convertible out of the dealership. Taking off down the road, he floored it to 80 mph, enjoying the wind blowing through what little gray hair he had left. "Amazing," he thought as he flew down I-94, pushing the pedal even more. Looking...
  20. BJ43

    Just For LM2596 Users

    I do not use chargers with these as I do not have a small balancing charger and the wiring would be a PITA. All my 2596 mods are set up to be used as passthrus with a on off on switch which selects my source.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu