Search results

  1. Akya2120

    AVR ATTiny25 microprocessor control mod

    Sorry, raidy in the german forum said it wasn't to hard. The force sensitive resistor would be to change voltages. This way there is no need for a display. Just push to your desired vapor and throat hit. Raidy said the code was under a KB I believe.
  2. Akya2120

    AVR ATTiny25 microprocessor control mod

    I have both the code and the witing diagran. All translated by google. I will pm him again to confirm if he is ok with it. As I said last night I have some responsibilities to take care of but after that I will get a hardware list in order. The software raidy said was BASCOM I believe. I am kind...
  3. Akya2120

    AVR ATTiny25 microprocessor control mod

    I have been digging through raidy's posts on the E-rauchen-forum.de, as well as PMed him. He linked me to one of his catch all threads for his mods. Very good work, I asked him what he recommends for a microprocessor control mod and he recommend the ATTiny25. After hours of reading through the...
  4. Akya2120

    Some homemade attys and genesis

    What were his results?
  5. Akya2120

    Some homemade attys and genesis

    When I said dual coil i forgot to mention dual wicks. Has anyone tried a dual coil with two wicks? This could also allow for two differebt types of mesh to be used.
  6. Akya2120

    All my mods part1

    Want to make notes of the important stuff? Because I'll be reading through this whole thing other wise. Migh just do it anyway. Going to the machinist monday. No work tomorrow, I might be reading 170 pages of posts just because I should.
  7. Akya2120

    Some homemade attys and genesis

    So basically the same heat, more distributed? Also more power consumption. So this could mean you wont be able to dry out the wick?
  8. Akya2120

    Some homemade attys and genesis

    Just an idea. More wicking, more steam. Trying to improve. I need to get to a machinist and get my normal one made. Like i said moght not be a good idea. We will see.
  9. Akya2120

    Some homemade attys and genesis

    Ah I see. I was thinking of doing them in parallel but that is probably a bad idea. Maybe I can re work it for series. Although this could be a bad idea all around, but also maybe not. Maybe I will make one in series and one in parallel to see how it affects the vape of a genesis. If I can ever...
  10. Akya2120

    Some homemade attys and genesis

    I have a question about dual coil attys. The reason I am asking here is because I'm thinking of a dual coil genesis. Does having two coils make the resistance higher or lower. Lets say if I had two, two ohm coils. What would the resistance be? Anyone think this is a good idea?
  11. Akya2120

    Opinions on provaris please

    Those are way cheaper than the AWs, but will they degrade the unit? Are they bigger because of the pcb?
  12. Akya2120

    Would This Work? Genesis Atty - Alternative Materials

    What if rather than directly heating the porous ceramic you used the material they use in cartos around the coil. Kinda like the willpro13 design. That way you aren't depending on getting the ceramic hot but you can still use it to wick from a tank. I could see problems with thick liquids. I...
  13. Akya2120

    Opinions on provaris please

    I've always just done the math for that with my buzz haha. V^2/ohms=watts, V/ohms=Amps. Too bad they don't have the vari doing math too haha that would another feature to provari 2.0. Oh also turning the screen screws into touch buttons for volts up and down in the console and tap both for ohm...
  14. Akya2120

    Opinions on provaris please

    Yeah I'll order that. I missed it on their page. Any e liquid recommendations? I'm either ordering the black or the satin. I would only deal with the finger print magnet for black chrome. Cause that would be awesome I think. If I don't get the IMRs what will happen? Because the max amps out for...
  15. Akya2120

    Opinions on provaris please

    So I like the chrome, but I am worried that it won't hold up well. I take good care of it but I am worried if I drop it once the chrome will start peeling off or get pretty messed up. I am going to buy one but I was thinking that the satin finish would hide anything that did happen better than...
  16. Akya2120

    3.7v bottom feeder I made

    Nice little juice fed box. I really like your switch what is the rating on it and where did it come from?
  17. Akya2120

    Please help me,i where can make me or buy me a hybrid tankmod or a repairable tank longlfe atomizer

    Rico, I don't know if I will be selling them, don't count on it. If I do sell them, there will be a post about them and there won't be many. I am not making reservations for them, it will be first come first serve after the post is up. This is all IF I have any to sell. The classifieds is a...
  18. Akya2120

    Please help me,i where can make me or buy me a hybrid tankmod or a repairable tank longlfe atomizer

    Rico, you must either design a Genesis and have it produced at a machinist or you can take someone elses design and have it made. I am working on my own design and will be posting it if my genesis works out well. If you are looking to buy one go to the classifieds. Regardless if you buy or make...
  19. Akya2120

    Variable Voltage Mod History Wanted

    Who else thinks it's kinda ridiculous for someone to limit creativity? I'm sorry but a tube is a tube. So now a tube can't look a certain way because Mr Buzzetti has a patent on it? I think that is a pretty lame move. I think the only part that should be patented is the way that the electronics...
  20. Akya2120

    Starting a genesis build

    So this is all through my friend's shop. His lathe is old and their machinist doesn't think it will handle it. My friend is contacting another shop with automated mills. We will see how it turns out. Hopefully not too costly. If it had been aluminum, I could have made it today but because I am...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu