Search results
-
Epoch D1 RTA by Ehpro
I really like the design features of this one. Unfortunately, it loses me with it's 2.5ml capacity. It's just to big to have such little capacity. -
Eleaf Lemo II
There's some information that is missing from your post. You don't mention what wire gauge you are using. Also, is 2Ω the reading you were expecting? To me, it sounds like you may have some kind of connection issue causing a high resistance reading that shouldn't be there. If you have a... -
Lemo Dieing?
Have you checked to see if the center air screw is fully tightened to the positive block on the deck? I found that loose on one of mine once. It's really the only thing you didn't mention....... -
Kayfun Undead?
I always thought it looked liked a nice set, but it isn't anything you couldn't put together yourself at Fasttech for half the price. Although, I couldn't find that exact logo on the chimney base. (They have many others to choose from). Other then that, the only other upgrade is that the base... -
Epoch D1 RTA by Ehpro
By November and December, everything being talked about now will be old, old, news and there will be a bumper crop of new devices and atties to choose from. It's how they get ya' ;) -
Attack of the (Kayfun v4) Clones!
I did find a minor maching issue with my Focal clone that may have been causing a leaking issue. I noticed that the o-ring that sits in the upper portion of the top cap where it seals to the chimney was not sitting in it's groove nicely. I took the seal out and found that there was several... -
Attack of the (Kayfun v4) Clones!
Awesome. Exactly what I was looking for. Thank you! -
Got my Kayfun V4 from Tobeco
I read this somewhere in the big thread the other day, but it makes it simple for me to think about: To close the juice control for re-filling, turn the atomizer body as if you were removing it from the mod. To open it, screw the atomizer like you were installing it to the mod. Works well for me. -
Attack of the (Kayfun v4) Clones!
I finally received my Kayfun V4 clone from the Focal Ecig "group buy" last night. I have to say, I am impressed with it. For $13, I did not receive the jenky clone I was expecting. Machining and finish on it is overall very nice. It's a complete and total knockoff, complete with Svoemesto... -
Help with Sigelei 100w
Did you try vaping on it? Sometimes my Sigelei's don't register 100% until the fire button is pushed. -
The First Coil Build - Not Good
That coil looks like it would vape to me. Practice will make perfect. And always remember, the only person that knows what your coil looks like is you. That is, until you post a photo of it on the internet. ;) I think the issue is wicking or lack there of. Looks like there may not be... -
Eleaf Lemo II
I have at least two 20W Isticks that have positive pin issues. The simple fact that it fires fine on your 30 Watt says the problem has nothing to do with the Lemo. The Lemo leaks for one of two reasons: Either a sealing issue due to worn/missing/damaged seals, or improper assembly, or it... -
20 gauge kanthal getting to hot
It gets even worse with 16 gauge. o_O- VaPreis
- Post #8
- Forum: General Vaping Discussion
-
Expromizer Clone
I have an authentic v1.1 and a clone couldn't be much worse. The threading is horrendous in the chimney sections. So rough, that it snags the cotton as you thread the chimney to the base. Mine also developed a terrible voltage drop which I was unable to correct. I'd estimate the base added... -
Focalecig chat...Part 2
So I recently ordered the Kayfun V4 clone on a Focal Ecig group buy, and that is neither here nor there.... My question, is that I paid $2 extra for airmail with tracking #, and paid via PayPal. I've never received an email from Focal in regards to the purchase other then notification from...- VaPreis
- Post #3,076
- Forum: General Vaping Discussion
-
Will A Multimeter Do The Job?
A multimeter will work just fine, and be more accurate then a 510 resistance checker. I do find a 510 resistance tester to be a suitable check for reasonable builds. Personally, I would wrap a coil and let the iStick test it for you....but that's me. -
Can this Kayfun Deck be Saved?
The picture doesn't show, but if you have a dremel, at this point, it couldn't hurt to try and machine your own. Meanwhile, a V2 deck from Fasttech is a cheap replacement. $6.64 Replacement Base for 22mm Kayfun Lite Plus V2 - stainless steel at FastTech - Worldwide Free Shipping -
Lemo drop airflow
The piece with flathead screw slot is what tightens the center screw to the positive block on the deck. It shouldn't be loose at all. The ring around the outside of the screw is what should be adjusted. Clockwise to tighten the airflow. -
EHPro Mini Buddha
I use mine every day, and exclusively while at work during the work week. I don't think I've wicked it in more then a week and it still tastes great. I actually think it's pretty strange, because I don't get that kind of life span out of a wick in anything else using the same liquid. -
The Lemo RTA: A Build With Pics
I've been wicking just as you for quite some time. I never subscribed to the "whispy" cotton wick. I've always found more was better. Not only does it seem to deliver better flavor for me, it tends to eliminate the surprise POP! when you light up a cold coil. It just works better. While...