Search results

  1. steved5600

    Need the dimensions of the YiHi SX350 35W Chip

    Wanting to build a mod with the Yihi SX350 chip and am pricing parts but can't find a data sheet on that chip. Need the dimensions so i can buy the right box for it.
  2. steved5600

    hana clone with magnet back?

    You have to drill out the screw holes and mill the counter sunk holes on the back. I've seen them just did not want to take a chance on messing up my mod.
  3. steved5600

    Wanting to get into diy juice, any tips?

    Yep.
  4. steved5600

    What to use as a measuing device

    4 different sizes of syringes, Precision scale, Some graduated cylinders. The reason for more sizes is that with a 10ml syringe you would have a problem measuring .2ml. I have a 1ml glass and plastic, 3ml plastic, 5ml plastic and 10ml plastic and glass. 3 diff sizes of graduated cylinders...
  5. steved5600

    Show us your manly mod. The last one i did got closed and i got some new ones.

    My latest addition to my Manly mods. A repaired and upgraded cana DNA 30 mod.
  6. steved5600

    Lead in brass

    If you want to see if there is lead in the brass you might try something like this to check it out. 3M LeadCheck Swabs, 8-Pack - Paint Drop Cloths - Amazon.com
  7. steved5600

    Have a question about getting to vaping at 30 watts.

    Oh the grass is always greener on the other side of the fence thing can get really expensive. I should know have like 7 mods and even more atty.s.
  8. steved5600

    Have a question about getting to vaping at 30 watts.

    Don't just jump into Rebuildables with out doing some home work if you go that route. Got to ask yourself why go 30 watts first. I have a 30 watt mod but have yet to need to go over 25. Big clouds are impressive but all that vapor you see is not being absorbed it's all a psyh thing. Back to...
  9. steved5600

    Almost done vaping???

    FYI even if i get to a Zero nic level i will keep vaping as I love the taste. After a really bad injury eating by mouth is problematic with me so this is a way I can taste stuff.
  10. steved5600

    Kayfun 3.1 or aero tank giant?

    The Giant is meant for 28mm + mods like the Hades or Seven 22. Just has a bigger tank than the aerotank mega. If you want to go kayfun type. I'd suggest the Fogger V4. It's easier to do dual coils than the Kayfun and the Kayfun works best for me dual coil. I have never had a Fogger v4 leak...
  11. steved5600

    Almost done vaping???

    May I suggest you keep some stuff in case you have a bad day or something and feel the urge to smoke. I don't feel the urge and I'm coming up on 2 years on Aug 7th I think it is. Just don't let vaping become a hobby like i did. Gets expensive. If you want to try not vaping and not smoking...
  12. steved5600

    Kanthal Build Cheatsheet

    This may help some too. Glad to see someone learning ohms law for a change. Just make sure you learn battery safety. With Mech's make sure and us the locking mechanism. http://www.steam-engine.org/coil.asp?s=dp&r=0.8&awg=28&id=2.5
  13. steved5600

    What is the best build you have used over 1 ohm?

    You did not mention what the Inside Diameter of your coils were. I get good builds with dual coils with an I.D. of 2.5mm 28ga 9 to 9/8 wraps now that will be a total ohm below 1 ohm of .8 ohms. But the ohms per coil will be 1.6 ohm. At 4.2 volts that will be 22 watts total 11 watts per coil...
  14. steved5600

    Advice needed for Nautilus rebuild and MPV2

    My advice is get a RBA. I have the nautilus and it's pretty good it's just to much of a pain to rebuild well. lots to go wrong. I would first off not use mesh for your wick. Just for the wrap only. It's hard enough to keep from having a short somewhere. Also you need to be using NR-R-NR wire so...
  15. steved5600

    Can someone give opinion on how to vape Cana

    I do go sub ohm but i do that on my mechs and RDA's.
  16. steved5600

    Can someone give opinion on how to vape Cana

    Ok I have a cana. Don't have the 4 volt issue you speak of so will go to what i do know. RTA's I would suggest followed by build suggestion: #1 Fogger v4, build (2) 2 ohm coils 28 ga a1 kanthal 10 tight wraps 2.5 mm ID using ( in no particular order) cotton or cellucotton. Do not pack the wick...
  17. steved5600

    Help please

    What kind of atomizer are you using because when you go to High VG some tanks systems will not like it so much. 100% VG is best in drip type atomizers. I looked at the places i know that sell that and they did not have apple or strawberry flavors. Vanilla custard they do. Also when you find...
  18. steved5600

    Cleaning patina from the inside of a copper mod

    The corrosion can be removed with white vinegar and a tooth brush. To keep it from happening again you can use something like Noalox® Anti-oxidant Compound.
  19. steved5600

    Few Qs About batteries

    #1 max continuous amps is the safe limit of amps that it will put out. #2 max instant is just that a momentary current level a sure which can happen when you first fire up some equipment. #3 20 amps is the max continuous limit. # no it is not a 60 amp battery.
  20. steved5600

    Is it possible to build a well functioning RBA for a Cool Fire 1?

    You needed to spell out what satisfaction is. Could be flavor, clouds or TH. At 2ohms and 8.5 watts you should be able to get flavor but not much in the way of clouds or TH. I'd go with the Kayfun single coil do a 2.5mm Inside diameter or there about with organic cotton and my nifty...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu