Search results
-
Ti Prometey 2 drip tank
wow... got to say after a few hours with the P3, its one kick a__s atomizer. I had it at 5 volts on the Ranger at first and the coil is 1.7 ohms... 15watts, powerful vape. I took it down to 4.2 volts --- 11 to 12 watts; just right. Flavor is good either way, and I will probably go up and down...- ukeman
- Post #221
- Forum: Atomizer Reviews
-
High End REGULATED MODS !
Got the Prometey3 today. Quick 1.7 ohms build (30g kanthal) at 5 volts on Ranger #313 Fine vape with 2mm air (full open AFC). As you can see I'm a Prometey and Achilles fan; didn't even show the Flask40 with an Achilles. P3 with the little adjusments from the P2 (shorter chamber) shorter but... -
Ti Prometey 2 drip tank
rushed a wrap; 8wrap, 30g kanthal, 1.7 ohms but you get the point about the loops to catch the wick. wicked. On Ranger at 5volts: Vapes excellent! at full air just right. I intentionally dripped 1ml into it (at a tilt) after filling the filler and got no leaks. NO LEAKS. I could try for...- ukeman
- Post #220
- Forum: Atomizer Reviews
-
Ti Prometey 2 drip tank
Got my P3 in! Ok first off from looking, and something i didn't notice before: this one looks like its strictly a top filler feeder vs. P2 top and bottom per the tall air post allows you to add extra juice up the air post. In the P2 I normally fill the filler AND add close to a ml of juice at...- ukeman
- Post #218
- Forum: Atomizer Reviews
-
High End REGULATED MODS !
i kind of agree... bottom feeding is pretty awesome but imo unless its got some good chip that can give you "more" than a mechanical, like a DNA or what-not, the choices are few. -
**Cloupor T8**
Since we are talking about specs (and I haven't even tried my T8 yet; too many box mods), I just perused some new offerings on Vapor Tek USA and see that the high watt boxes, i.e. 260 watt something or other, and others, they only show the watts range in the specs. Which ticks me off because i... -
Ti Prometey 2 drip tank
I'll post pic later. I make just a small loop like the shape of a tennis racket (sans strings) :) It has to be on the back side of the left post (when you screw the top cap chamber on)... so the twisting (to the right) will push the wick towards that wire hoop. As long as it stays above the post...- ukeman
- Post #217
- Forum: Atomizer Reviews
-
Pencil
anybody like Pencil by Must Vape? Its one of my top 2 ADV's. it's so unique to a bakery flavored juice I wonder if anyone has tried anything similar thats good or even a DIY version. I'm on my 3rd 120ml ... in the last couple months. edit: Described as "Pear a al mode", I actually cannot tell... -
Pure Vapes has 3ml FlavourArt flavorings
I'm curious because this has pear in it, if anyone has tried a very popular juice called "Pencil"... its one of my favorite ADV. Pear is the main fruit but I can't even detect it as what I'm used to in DIY pear. Its actually described as "pear a la mode". What I wouldn't give to figure it out.- ukeman
- Post #3,120
- Forum: DIY E-Liquid
-
Ti Prometey 2 drip tank
I'm sure Dspin will have some discussion on best builds, but I use silica, or japanese cotton pads, and have tried different cotton fibers too. The silica holds up top easiest but the flavor is better with cotton. For my cotton pads, I make a typical wick, but when I build the coil, when i...- ukeman
- Post #214
- Forum: Atomizer Reviews
-
**Cloupor T8**
I'm hoping the aluminum frame will make this gluing doable vs trying to super glue to a plastic Hammond box. I have a Raptor in plastic box that is impossible to keep the magnets from slipping. -
**Cloupor T8**
is there any trick to super gluing the magnets? or tips? I got mine in and the magnets were not attached; like 4 of them. Do you glue one to each side... the box and the lid? I would guess so. i actually had ordered a bunch of high watt box mods just before the DNA40 came out and I HAD to... -
DNA40 Hana clone
I ordered a clone 40 the same day the real ones came out, from a chinese site that was selling T8's... I got the T8 about a week ago, long after others got theirs from other sites. They told me the clone was not ready and did I want 2 T8's ? lol.... NO I'm still waiting. site is EVKOO or... -
High End REGULATED MODS !
I don't want to sidetrack the "high end" thread with talk of this Atlantis (not really high end but definitely groundbreaking) but will just say yeah... for sure, this may be a single coil and when I said 65watts it was for the Tohb or whatever dual coil RDA the dude was using in the vid with... -
High End REGULATED MODS !
^ got to love that guy! :) fwiw, the dude should be able to get some cooler vape even at high watts no? with his atomizer that has plenty of air, and enough juice? just wondering. I don't vape RDA's much (mostly RTA) but with enough air/juice, i.e. 65w is not a hot harsh vape. fwiw, the... -
Atlantis
so we're talking about vertical spaced or micro (contact) coil... versus a horizontal like in the Nautilus? Guess so... but wonder if they're interchangeable?- ukeman
- Post #37
- Forum: General Vaping Discussion
-
protovapor xpv
totally agree; so I got mine as a backup or alternate to my glitch-free Flask40... hell I'm vaping off of 7 - 8 devices anyway lol so although it takes quite a while to charge up, its still a treat. -
-
High End REGULATED MODS !
I don't even know if this is the same VA high watt box that was PWM? Folks called it the "rattlesnake" because of the sound it made when firing. But if its VA its got to be good imo... There are a few clones out there; i googled it and all i got was clones. -
High End REGULATED MODS !
I don't even know if this is the same VA high watt box that was PWM? Folks called it the "rattlesnake" because of the sound it made when firing. But if its VA its got to be good imo... There are a few clones out there; i googled it and all i got was clones.