Search results

  1. M

    My 5v Box Mod

    3.7v switch? How do you mean?
  2. M

    How much current does the Atty draw

    Nossir.... Ohm's law. Amperage equals voltage divided by resistance....that never changes. You can plug the atomizer into a supply that provides 500 amps, but that doesn't mean that the atomizer will take 500A from the power supply. However, some power supplies ARE current-limited - see the...
  3. M

    I built my first MOD (nicostik) no solder.

    Or spend a few cents and get a crimp on wire connector - your choice. ;)
  4. M

    Want to try juices but...

    She sent a bottle of apple along with the starter kit that I ordered from her...it's good stuff, too. Just ordered 2 more 50ml of Marlboro and a 10 of RY4....
  5. M

    Results of another conversation...Vape and Vibe!

    She won't have to search for her cigs (or PV) afterward.... :p
  6. M

    Don't suck too hard!

    I'll bet a lot of it is due to the camera angles...
  7. M

    Don't suck too hard!

    If you're taking a 'mouth drag' and not a straight inhale, your cheeks will hollow out as your jaw drops....but yeah, it *does* sorta look like they're sucking their eyeballs out, doesn't it?
  8. M

    A noobs journey into first e-cig purchase

    Wow...seriously???
  9. M

    My 5v Box Mod

    Try to hold out until you order more juice, then.... grab a couple bottles of RY4 and a charger or two...
  10. M

    Advice needed

    Trim a bit off the LARGE end of the battery spring, if you can get it loose. Try taking off one coil, then reinstall and test. If you can't get the spring loose, trim from the small end, but you'll need to make SURE that you bend the cut tip in (across the base of the battery, for good...
  11. M

    My 5v Box Mod

    Burnie - Grab up a couple of 401 chargers from Ruyan - they're about 3 bucks apiece. You'll need to either grind down the connector some to expose the atomizer holes, or slot the top like a castle nut - that's what I used for my 510 nicostick and usb passthrough that I made. Added bonus -...
  12. M

    My 5v Box Mod

    I can get about 1.5-2 days out of my 14500 parallel nicostick (510). Will eventually build a series nicostick, then do some PVMA sweetness....maybe even a dual voltage nicostick.
  13. M

    I built my first MOD (nicostik) no solder.

    Nicowolf has photos of a no-solder box in her "how to build a nicostick" thread - she used crimp-on connectors to the momentary switch.
  14. M

    901 to 510,801,Nebula adpaters

    That would be... me!! ;) I've only got 510 stuff. Although, I *did* just get a BE112 starter kit and some extra atomizers for a couple reasons: 1. Try to get some smoking co-workers to switch 2. 5v 801 nicostick, per my 'best bang for the buck' poll on types/voltages.
  15. M

    Nico-Stick Atomizer problem

    401 battery charger - $3 from Ruyan.
  16. M

    My 5v Box Mod

    Ok, so they shut down completely rather than free-run...good to know. Thanks, Shreck.
  17. M

    One tough atomizer

    Wow!!! That's REALLY 'one tough atomizer'!!!
  18. M

    Who has a GOOD Battery charger?

    It's the trickle after the 'normal' recharge cycle that keeps them 'done and ready' until you pull them off...or am I misunderstanding you?
  19. M

    My 5v Box Mod

    He'd need a spacer for the second battery or he'd have an open circuit. Hooking up a single battery and seeing if there's voltage on the output WOULD let us know if the regulator shuts everything down or just passes it through (goes uncontrolled) as the voltage falls, though.
  20. M

    The 'Easy Puff' mod - a revolution in vaping ...

    But, it also increases the time needed for the atomizer to reach operating temperature - maybe some sort of delay timer?
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu