Search results

  1. junquedujour

    Printed Mechanical Bottom Feeder Mod

    could it be that i have my nut on top and followed the instructions as per the pdf be the reason mine does not have a shut off point when turning the button? or is that caused by something else? my friend says she can twist her button and it will make it so it won't fire; making it safe to drop...
  2. junquedujour

    Catfish atty mods.

    i was not that crazy about mine either until i drilled out the cap hole. it made a world of difference for me.
  3. junquedujour

    Printed Mechanical Bottom Feeder Mod

    i wonder if the crockpot would get hot enough. i'll have to dig it out of it's deep dark place, dust it off, and test it with a thermometer to see how hot water will get in it. it might actually get used again for the first time in 8-10 years. heh.
  4. junquedujour

    Printed Mechanical Bottom Feeder Mod

    what was the approximate ratio of vinegar to water?
  5. junquedujour

    Printed Mechanical Bottom Feeder Mod

    my current order from shapeways is still *processing* so i was reading thru the link for dying 3d plastic that someone originally posted on one of these Peko threads. apparently the rit dye does not need the vinegar just the jacquard brand dyes need it. hmmm.
  6. junquedujour

    Printed Mechanical Bottom Feeder Mod

    oh boy. this should be interesting then, cuz i'm not a big blue fan. my intent is to go over the *black* base with other paint so i can only hope that it's at least a darker shade of blue. :-[ p.s. i'm going to be using the powder this time AND the vinegar.
  7. junquedujour

    Printed Mechanical Bottom Feeder Mod

    that turned out grrrrrrrrrrrrreat Merlin21!!! i bought some black powdered dye this time for my incoming shells. i am hoping it actually comes out close to black this time. the tan liquid RiT turned out dusty olive green. haha!
  8. junquedujour

    here's the instructions i used that gdeal put on dropbox - worked great! but i also picked up...

    here's the instructions i used that gdeal put on dropbox - worked great! but i also picked up some pointers from the thread also: https://www.dropbox.com/s/08ux4htcd1pgauu/Peko%20V1.1%20Mechanical%20Mod%20Build.pdf?dl=0
  9. junquedujour

    Printed Mechanical Bottom Feeder Mod

    they are all fab but i loveLoveLOVE the copper.
  10. junquedujour

    Printed Mechanical Bottom Feeder Mod

    yeh, the possibility of having to take it apart again is a problem with the glue. this loctite green does seem like a better option. thanks!
  11. junquedujour

    Printed Mechanical Bottom Feeder Mod

    the nut that joins these angled pieces fell outta mine today. luckily i found it. i'll be tearing it apart to get it back into place, but it seems i don't have the strength to tighten it as much as is needed. i wondered why my switch felt so wonky. sooooooooooooo, does anyone think there is a...
  12. junquedujour

    Printed Mechanical Bottom Feeder Mod

    I did get one put together and have been vaping it all day, BUT i had a part left over. yeh, that can't be good, eh? it is the larger o-ring. i could not find where it goes in the instructions. i also sent one kit and shell to a friend and they are having the same question. help please.
  13. junquedujour

    Printed Mechanical Bottom Feeder Mod

    gdeal - are you using the vapage bottles in the Peko? i see that some are using them in the DNA version. will they fit in the Peko? if so, they are having a 35% off sale today only.
  14. junquedujour

    Printed Mechanical Bottom Feeder Mod

    if you have not already used it once, i would contact them. this was my first-ever order with them, but i don't see where it says anything about 1st time buyer.
  15. junquedujour

    Printed Mechanical Bottom Feeder Mod

    i did an ever-so-bit of mix 'n match with the white plastic: 2x PeKo V1.1 - Mechanical Mod - Ring in White Strong & Flexible Polished 1x PeKo V1.1 - Mechanical - Body in White Strong & Flexible Polished 1x PeKo V1.1- Mechanical - Internal in White Strong & Flexible Polished 2x PeKo V1.1 -...
  16. junquedujour

    Printed Mechanical Bottom Feeder Mod

    oh duhRme. i had to adjust the fire pin and now it seems to be much better. now to work on getting it to feed better.
  17. junquedujour

    Printed Mechanical Bottom Feeder Mod

    i am having a helluva time with getting it to fire every time. it's being very persnickety and a hard press. what did i do wrong and what can i do to fix it?
  18. junquedujour

    Printed Mechanical Bottom Feeder Mod

    has anyone tried the RIT dye on a polished case?
  19. junquedujour

    Printed Mechanical Bottom Feeder Mod

    is that for 10% off also?
  20. junquedujour

    Catfish atty mods.

    manOman Chowderhead! clearly you are occupying real estate in his head. it's so cute, eh? heh.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu