Gdeal, you probably didn't follow the directions. It says right on the front.... first get hammered... then ignore the rest of the directions because you're drunk.
Printed Mechanical Bottom Feeder Mod
- Thread starter gdeal
- Start date
- th_trl_thread_readers 0
- Status
Gdeal, you probably didn't follow the directions. It says right on the front.... first get hammered... then ignore the rest of the directions because you're drunk.
Very nice i used the same thing , hammered gray [emoji106]
Okay while both look absolutely awesome. My personal preference would be this one.
What RDAs are you both using?
Ambient temp was around 65f when I sprayed it. Looks like yours fisheyed, which I've experienced in high humidity conditions.
both come as bottom feeders?
Okay, google is my friend. I see 73neb's is, but when I found yours it did not say.
Last edited:
Yeppers. Find pdibs thread on here and he can hook you up with a nuppin. The Odin bottom feeder may be harder to come by.
Yes they both do
Odin;
http://lokilab.com/products/odin-rda-bottom-feeder
Nuppin;
http://www.e-cigarette-forum.com/fo...um/524238-pdib-library-tech-specs-info-9.html
Also check this thread for many more bf atties;
http://www.e-cigarette-forum.com/fo...-supplier-forum/581604-catfish-atty-mods.html
Odin;
http://lokilab.com/products/odin-rda-bottom-feeder
Nuppin;
http://www.e-cigarette-forum.com/fo...um/524238-pdib-library-tech-specs-info-9.html
Also check this thread for many more bf atties;
http://www.e-cigarette-forum.com/fo...-supplier-forum/581604-catfish-atty-mods.html
Haha welcome to the world of bottom feeders 
Get yourself a peko now ...i have quite a few bf mods but I cannot put my peko down ....
Get yourself a peko now ...i have quite a few bf mods but I cannot put my peko down ....
Haha welcome to the world of bottom feeders
Get yourself a peko now ...i have quite a few bf mods but I cannot put my peko down ....
the only thing that has slowed me down was finding bottom fed RDAs.
Catfish atties all the way. Do not hesitate. Beware of addiction though.
First PeKo built. Gdeal was on the money. This is a mod even Kentastic can build. (Though he did have to use two kits due to a superglue incident we will not talk about) One thing I did have to do was switch over to the light spring for the firing button. When I tried the magnets they were so weak that they barely kept the button from auto-firing. It was pretty impressive to literally have a touch-button firing, but I quickly got tired of every time grabbed it, it would start firing just from the movement. I'll have to experiment with the next one now that I kinda know what I'm doing. Maybe I can figure out what I was doing wrong or just plain add a third magnet.
FYI, Loctite Ultragel Control works really, really, really well. Anyone have an extra large nut and brass screw that goes to the button assembly on the PeKo? I think I got a defective one......
First PeKo built. Gdeal was on the money. This is a mod even Kentastic can build. (Though he did have to use two kits due to a superglue incident we will not talk about) One thing I did have to do was switch over to the light spring for the firing button. When I tried the magnets they were so weak that they barely kept the button from auto-firing. It was pretty impressive to literally have a touch-button firing, but I quickly got tired of every time grabbed it, it would start firing just from the movement. I'll have to experiment with the next one now that I kinda know what I'm doing. Maybe I can figure out what I was doing wrong or just plain add a third magnet.
FYI, Loctite Ultragel Control works really, really, really well. Anyone have an extra large nut and brass screw that goes to the button assembly on the PeKo? I think I got a defective one......
Acetone is your friend.
First PeKo built. Gdeal was on the money. This is a mod even Kentastic can build. (Though he did have to use two kits due to a superglue incident we will not talk about) One thing I did have to do was switch over to the light spring for the firing button. When I tried the magnets they were so weak that they barely kept the button from auto-firing. It was pretty impressive to literally have a touch-button firing, but I quickly got tired of every time grabbed it, it would start firing just from the movement. I'll have to experiment with the next one now that I kinda know what I'm doing. Maybe I can figure out what I was doing wrong or just plain add a third magnet.
FYI, Loctite Ultragel Control works really, really, really well. Anyone have an extra large nut and brass screw that goes to the button assembly on the PeKo? I think I got a defective one......
Loctite Green is too!
That could be interesting, as long as you put a light coat of sealer on it so it did not leech if/when e-liquid got on it.
i am having a helluva time with getting it to fire every time. it's being very persnickety and a hard press. what did i do wrong and what can i do to fix it?
- Status
Similar threads
- Locked
